Recommended Posts

I also would like to see some benchmarks to decide whether to keep using Win 7 or upgrade, the DPC latency was horrible in the RP I would like to know if they fixed it

A friend of mine has a copy and he said that the DPC latency is MUCH MUCH better. So it should be a pretty good experience. I'll know more tomorrow when I see him at work to get the full review.

I also would like to see some benchmarks to decide whether to keep using Win 7 or upgrade, the DPC latency was horrible in the RP I would like to know if they fixed it

This is related to the drivers, not the OS.

So you might want to upgrade in a couple of month (ex: in october because OEM just received the RTM, give them time to build the drivers on top of it).

What are you testing your DPC latency with? Because DPC Latency Checker doesn't report accurate results under Windows 8. Try TimerTiming for example. The DPC latency is no worse than it was before.

I googled it but I can't find it :(

This is related to the drivers, not the OS.

So you might want to upgrade in a couple of month (ex: in october because OEM just received the RTM, give them time to build the drivers on top of it).

My Gene-z gen 3 has all the drivers compatible with windows 8 available for download from the asus site I'm very tempted to test the RTM myself but AMD hasn't released any driver for the RTM yet and my system runs like a charm, I would have to do a lot of performance tweaks if I had to go back to 7.

I googled it but I can't find it :(

My Gene-z gen 3 has all the drivers compatible with windows 8 available for download from the asus site I'm very tempted to test the RTM myself but AMD hasn't released any driver for the RTM yet and my system runs like a charm, I would have to do a lot of performance tweaks if I had to go back to 7.

I noticed that with the Release Preview - though I have been testing the Catalyst Preview drivers, if your GPU is supported out of the box (which was the case with HD4xxx up in the Consumer and Release Previews, and is the case at the minimum with the leak of Enterprise-N), the AMD-sourced drivers perform no better than the included drivers. Unless you absolutely need/use a specific feature in Catalyst (such as the transcoding feature) you likely won't miss them from a performance standpoint (or a gaming standpoint either). I'm getting ready to throw a game I've been thrashing in 8 RP at the RTM to see if the surprising trend I've been noticing (better performance) holds up in gaming as much as it's held up in applications.

I noticed that with the Release Preview - though I have been testing the Catalyst Preview drivers, if your GPU is supported out of the box (which was the case with HD4xxx up in the Consumer and Release Previews, and is the case at the minimum with the leak of Enterprise-N), the AMD-sourced drivers perform no better than the included drivers. Unless you absolutely need/use a specific feature in Catalyst (such as the transcoding feature) you likely won't miss them from a performance standpoint (or a gaming standpoint either). I'm getting ready to throw a game I've been thrashing in 8 RP at the RTM to see if the surprising trend I've been noticing (better performance) holds up in gaming as much as it's held up in applications.

Does it support openGL out of the box? A lot of the included drivers don't...

Surely even if performance is better/worse, it'll only be a few fps either way, right? I would have thought the OS had very little to play in overall performance. Mainly hardware and drivers!

Windows 8 has had some pretty darn good gains.

http://www.reddit.com/r/battlefield3/comments/qc6y0/bf3_on_windows_8_preview_build/

Diablo 3 seems to perform not as well as on 7 but I haven't run any numbers. I also discovered SLI wasn't enabled for who knows how long lol. Why can't the driver install just enable it if it detects 2 or more cards?

I've found gaming performance to be excellent on the Release Preview, so I imagine the final version will only improve on that. However, I came across some compatibility issues with certain games (LA Noire, Crysis 2) and that is simply unacceptable to me. I blame the games developers, as the vast majority of games run without issue.

As drivers mature I have no doubt that Windows 8 will be the faster operating system, just as Windows 7 improved over Vista and Vista improved over XP (yes, benchmarks confirmed it was faster in most games despite people's perceptions).

@patseguin - SLI is always disabled by default and with driver updates, which to me seems counter-intuitive.

I've found gaming performance to be excellent on the Release Preview, so I imagine the final version will only improve on that. However, I came across some compatibility issues with certain games (LA Noire, Crysis 2) and that is simply unacceptable to me. I blame the games developers, as the vast majority of games run without issue.

As drivers mature I have no doubt that Windows 8 will be the faster operating system, just as Windows 7 improved over Vista and Vista improved over XP (yes, benchmarks confirmed it was faster in most games despite people's perceptions).

@patseguin - SLI is always disabled by default and with driver updates, which to me seems counter-intuitive.

Considering that the issues with Crysis 2 and Windows 8 are entirely in DX11 (with DX9, which is the default, 8RP smoked 7 rather badly), I'd wager that it has to do with one of two issues; either Crytek had an OS-ism in the DX11 code (which is utterly inexcusable) or there is an issue with the runtimes (specifically, those for DX 11). I'm thinking that the former (not the latter) is the issue (as other games that support both DX9 and DX11 don't have the issues Crysis 2 does).

what does the dpc latency do?

Falcon4 @technet:

DPC latency, which (for the uninitiated) basically is how fast the "needs to be processed as fast as possible" tasks in a PC are run. Deferred procedure calls (DPCs) allow programs to "queue" actions to be done quickly in the processor scheduler, and they hang the whole computer until they get processed. For example, drawing a video frame on a screen needs to be done as soon as the data is ready and the frame time is reached. Playing music needs to keep the audio buffer filled in real-time. Moving the cursor is done in real-time as well - the mouse driver uses a DPC to move the cursor around.

That's why DPC latency is important. If there's a hardware driver using a DPC outside of MS's specs for drivers (which say that the DPC shouldn't be used to transfer data, and to return as quickly as possible - e.g. to signal "hey, go get the data")., DPC latency spikes can cause laggy, slow performance, audio glitches/stuttering, etc.

Does it support openGL out of the box? A lot of the included drivers don't...

Microsoft does not provide OpenGL functionality - OpenGL functionality is vendor dependent hence if there is no OpenGL provided by said vendor then I'm sorry you're not going to get OpenGL support.

For the most part drivers play a key in performance by optimizing the OS and cutting any overhead (because while you game the OS is still in the background and other things are still going on, then it will only help performance in the end. Win8 is out of the box lighter and faster than Win7, there might be some minor changes to the WDDM, i dunno the details for sure, but that could be why current drivers don't show much change over Win7.

Also doesn't Win8 ship with DX11.1 which is basically a even more tweaked and faster version of DX11 iirc. We just need more games to finally ditch DX9 and go full on with DX10/11 so we can see more of the benefits.

This topic is now closed to further replies.
  • Posts

    • Qwen 3.6 is better value per dollar, and you can run it locally for free.
    • I don't believe them that anyone using threads, at least meaningfully. It's the same thing for Facebook, people just don't engage with Meta platforms like they are thinking. This isn't 2006.
    • Not taking AI slop on the go with me, hard pass for me.
    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!