Recommended Posts

An elderly Chicago street preacher was harassed by protesters outside a Chick-fil-A restaurant as police in at least two cities investigate acts of vandalism allegedly by vandals upset over the company?s support for traditional marriage.

Artist Manny Castro, who said he is a homosexual, confessed to The Huffington Post that he was responsible for vandalizing a Chick-fil-A restaurant in Torrance, Calif.

?I?m against what these people stand for, what this company stands for,? he told The Huffington Post. ?They?re trying to take away what little rights we already have.?

Castro spray painted ?Tastes Like Hate? on the side of the restaurant. He called his criminal activity ?art? and denied he broke the law.

?It?s paint on a wall,? he said. It got removed in less than an hour. It?s not that much of a crime ? it?s a protest.?

?I thought of the photographs from 40 years ago of Christians protesting blacks marrying whites,? said Castro. ?It is the same thing.?

Police told the LA Daily News they are investigating the incident.

A second incident occurred in Missouri. Someone spray painted ?don?t hate? on brick walls and ?tastes like hate,? at a Chick-fil-A in Des Peres, television station KMOV reported.

In Chicago a group of protesters surrounded an elderly street preacher outside the city?s lone Chick-fil-A restaurant. Video of the incident was posted on the website legalinsurrection.com.

The protesters ridiculed and mocked the man ? using chalk to write insulting messages on the sidewalk. One of the messages read, ?He?s really gay deep down.?

?I do hate God,? one protester screamed at the elderly man as someone waved a rainbow flag. ?Then your Bible is in itself immoral. I am tired of your hypocrisy, sir.?

In other acts of violence, a Chick-fil-A restaurant in Martinsburg, West Va. was evacuated after someone called in a bomb threat. The threat was later deemed a hoax. In Greenville, South Carolina, a man was arrested after he blocked the drive-thru of a Chick-fil-A with his vehicle.

Source

I am fully convinced that man, as a whole, is an incredibly flawed and self-centered bag of stupid.

I seriously doubt most of the people protesting have had folks get in their face and scream at them, like they do to others. It is shameful that they, in a quest for acceptance instead turn to anger, hate, and belittlement like they say they receive. When you cannot rise above what you claim to fight, you have already failed.

Shameful no matter what the cause.

But... but...

God created man, in HIS image!

...that was prior to the choice of sin and falling short of God and his glory. The image is still there, just very tainted by the nature of sin and well, stupidity.

Meh, i dont even care anymore. Even if the republicans get over gays, like they did the blacks...theyll just find a new group to hate. They really drag america down..

I like your comment, but it isn't republicans. It is really anyone who thinks something is "sacred" enough to deny a right that others have. Nothing is sacred, and discrimination is discrimination, I don't care how you try and sugarcoat it. Anyone who thinks this way is dragging America down. Religious groups have been impeding science, and progression for years.

  • Like 3

Meh, i dont even care anymore. Even if the republicans get over gays, like they did the blacks...theyll just find a new group to hate. They really drag america down..

So, nothing to say about the men making fun of this preacher? It exists on BOTH sides.

  • Like 2

What annoys me is that people in this thread and the world think that gays have some sort of hive mind, that a small group of gay people even one gay person speaks and acts for every gay person.

Its ridiculous.

Just because these gays are idiots doesn't mean that every gay person condones it. Why would you judge millions of people by the actions of a few....

  • Like 2

What annoys me is that people in this thread and the world think that gays have some sort of hive mind, that a small group of gay people even one gay person speaks and acts for every gay person.

Its ridiculous.

Just because these gays are idiots doesn't mean that every gay person condones it. Why would you judge millions of people by the actions of a few....

I'm totally playing devil's advocate here....but you're being very hypocritical. The same is thought about religious people.

That being said, I'm gay. I strongly believe that we should voice our concerns when our rights are being trampled on and I have on several occasions verbally attacked many of the bigots on this site. But to be completely fair (and believe me this isn't easy to admit given my thoughts on a lot of current issues regarding gays and marriage), what you're saying can easily be applied to how the religious folk are treated.

Lol I feel like a pod person right now...

It's all about context though, of course I should judge a group of religious people when the message is one of hate, gays are protesting in the name of their own rights, they aren't trying to oppress religion/heterosexuals, they just want equal rights, just a shame that some spoil it for the rest.

I have to say that when I watched that video, I felt really sad. It was very hard for me to watch that.

I don't really want to post this, but this reminded me of how Jewish people were made fun of in

Germany from the German SS at the very beginning before the war.

While I know not all people are like that, I was hoping that it wouldn't be this bad this early

and I fear it's only the start of things to come.

It's all about context though, of course I should judge a group of religious people when the message is one of hate, gays are protesting in the name of their own rights, they aren't trying to oppress religion/heterosexuals, they just want equal rights, just a shame that some spoil it for the rest.

But, you're insinuating that the entire group of religious people are the same. So you're basically saying it's not ok to apply these blanket thoughts/statements to homosexuals for instance, but perfectly ok to make blanket statements/judgments on religious groups.

I don't disagree that all homosexuals shouldn't be painted with the same brush, but you're implying that all religious people should. You're being a hypocrite. Which quite frankly, I find much much worse than someone who uses blanket statements (Which I do ALL the time. It's fun to run around painting everyone with a particular brush).

I'm not insinuating they are all the same but when the book they worship says that gays are an abomination its easier to target the religion than the people who worship it. If that happens to be a catch-all, tough titty.

All gays want is equality, the 'good book' says that gays are an abomination and sinners, its easier to apply a blanket statement to the people who worship that book because of the message it sends.

I'm not insinuating they are all the same but when the book they worship says that gays are an abomination its easier to target the religion than the people who worship it. If that happens to be a catch-all, tough titty.

All gays want is equality, the 'good book' says that gays are an abomination and sinners, its easier to apply a blanket statement to the people who worship that book because of the message it sends.

I definitely won't disagree that it's "easier to apply" to them, doesn't mean it should be and or that it's ok to do so. Which is my point. How does that saying go? People who live in glass houses, shouldn't throw stones.

I throw stones all day. I had Plexiglas installed ;)

What annoys me is that people in this thread and the world think that gays have some sort of hive mind, that a small group of gay people even one gay person speaks and acts for every gay person.

Its ridiculous.

Just because these gays are idiots doesn't mean that every gay person condones it. Why would you judge millions of people by the actions of a few....

Totally. The actions of one or a few shouldn't speak for everyone else in the group. So tired of seeing all these comments about the Chick-fil-a thing and people being annoyed by "the homosexuals" for being a part of it.

Though to be fair, the guy speaking may not even be homosexual for all we know. Plus considering this is obviously a demonstration, it just seems like the dude is merely expressing opinions of his own which is all about the free speech. The preacher guy could also retort back with his own opinions.

I'm not insinuating they are all the same but when the book they worship says that gays are an abomination its easier to target the religion than the people who worship it. If that happens to be a catch-all, tough titty.

All gays want is equality, the 'good book' says that gays are an abomination and sinners, its easier to apply a blanket statement to the people who worship that book because of the message it sends.

Well if you want to get down to the science part of it what makes homosexuality in nature normal? Humans and animals alike are suppose to procreate with male+female... you can not achieve that with F+F or M+M ..So in some regards it is an abomination just like albino animals. Now don't take this as me hating on gays because i don't - i think they should be treated like every other person as well - they only lack the ability to marry and assume legal authority over their spouse in medical situations..other than that they can vote, work at any job, own land, own a home, etc...Hell blacks were oppressed far worse if you look at it. What these protesters did in this video makes me lose a lot of respect for the movement - they want tolerance and acceptance but they have no problem bashing and demeaning a preacher or anyone who might not exactly believe in their lifestyle. Martin Luther King preached non violence..maybe the gay community should take a page from his book of non violent protest if they stand to gain what they truly want.

Well if you want to get down to the science part of it what makes homosexuality in nature normal? Humans and animals alike are suppose to procreate with male+female... you can not achieve that with F+F or M+M ..So in some regards it is an abomination just like albino animals. Now don't take this as me hating on gays because i don't - i think they should be treated like every other person as well - they only lack the ability to marry and assume legal authority over their spouse in medical situations..other than that they can vote, work at any job, own land, own a home, etc...Hell blacks were oppressed far worse if you look at it. What these protesters did in this video makes me lose a lot of respect for the movement - they want tolerance and acceptance but they have no problem bashing and demeaning a preacher or anyone who might not exactly believe in their lifestyle. Martin Luther King preached non violence..maybe the gay community should take a page from his book of non violent protest if they stand to gain what they truly want.

I never said it was 'normal', the norm is heterosexuality and homosexuality is outside of that norm. The problem is the connotation that is attached to words used to describe gays, while the usage might be entirely innocent the connotation makes it feel like they are less than, like they are second class citizens just because they like the same sex.

Abomination is a disgusting word to use to describe a group of people:

a?bom?i?na?tion

[uh-bom-uh-ney-shuhn]

1. anything abominable; anything greatly disliked or abhorred.

2. intense aversion or loathing; detestation: He regarded lying with abomination.

3. a vile, shameful, or detestable action, condition, habit, etc.: Spitting in public is an abomination.

Again, you use the word 'they' a lot, 'they' are a group of people, not spokespeople for every gay person. I agree they have MOST rights but not all rights and I never said that sexual orientation oppression was even the slightest bit like racial oppression, but oppression is oppression. While they have most rights they also cant adopt, get sacked from jobs for being gay, they get spat on, they get assaulted even murdered just because of their sexuality, again I'm not trying to say that it's anything as bad as racial oppression but gays have it a lot worse than you realise.

This topic is now closed to further replies.
  • Posts

    • Sihoo Doro C300 Pro V2 Ergonomic Office Chair review: The Ikea of chairs by Steven Parker I've reviewed a few gaming chairs over the past three years or so and generally found them to score well in our reviews. SIHOO reached out asking if I was interested in taking a look at their flagship chair, the Doro C300 Pro V2. I never got the chance to check out its predecessor, but the V2 is described as an "Adaptive Ergonomic Chair." It became available to buy in April of this year. Let's get things rolling with a closer look at the specifications and features. Specifications Doro C300 Pro V2 Model Ergonomic Materials Mesh Back and Seat; Soft PU Coated Armrests Height adjustability 45.5 - 53 cm / 17.5" - 20.9" Seat (w+d) 52 x 43 - 47 cm / 20.5" x 16.9" - 18.5" (adjustable) Backrest 52 – 60 cm / 20.5" - 23.6" (adjustable) Lumbar support Mesh built-in (adjustable) Armrest adjustability 8D Bionic Armrests Rocking angle 105°, 120°, 135° (fixed) Neck support Mesh built-in (adjustable) Net weight 27.3 kg / 59.64 lbs Weight support 150 kg / 330 lbs Colors Black, White Warranty 5 years (upon registering) Price $499.99, $539.99 Introduction At first glance, it looks like a chair that in another life wants to be a Herman Miller; It certainly looks like my Aeron Remastered, but the Doro C300 Pro V2 has quite a few more features and costs quite a bit less. SIHOO says that it is made up of a "DynaCore" system that tracks your movement and synchronizes the headrest, backrest, lumbar support, and armrests as you shift, twist, or recline. They also say that the "SyncroFlex Backrest" molds to your spine, which kind of describes how the mesh fabric works in most ergonomic chairs, but anyway. Below are the meat and potatoes measurements for the chair. Here is the same tech sheet, but in inches. Durability I would be remiss to not talk about the various durability testing this chair underwent before coming to market, as this is claimed on the product page. First of all, the chair is BIFMA-, SGS-, and TÜV-certified. As for durability, the tests undergone were: 100,000 Castor cycles tested 120,000 Armrest cycles tested 120,000 Recline cycles tested 120,000 Gas lift cycles tested 60,000 Armrest durability cycles tested 120,000 Rotation cycles tested Nothing about weights testing, though. Now that's all disclosed, now onto my own personal findings. Assembly The Doro C300 Pro V2 came in two large boxes (1) (2), and everything was packed very well, protecting the different parts of the chair. In the box, there is a folded sheet that explains the 12 steps to assemble it; they are: Remove the bottom cover on the aluminum base; Insert the five legs into the aluminum base and use ten screws to fasten them; Insert the castors into the legs; Replace the bottom cover on the bottom of the aluminum base; Place the Class 4 Hydraulics gas cylinder into the aluminum base; Screw the bottom part of the arm rests, taking care of the orientation using two screws on each side; Use three torx screws to fasten the footrest to the bottom of the seat; Fasten the backrest to the seat using four torx bolts; Fasten the armrests to the backrest using four Torx bolts (two on each side), taking care to note the orientation; Place the chair onto the Class 4 Hydraulics gas cylinder; Insert the headrest into the top of the backrest; Use two torx screws to fasten the headrest to the backrest. There's also an online guide you can refer to. Carefully unpacking the two boxes took around 15 minutes because almost everything is wrapped in plastic and protective foam; the chair assembly itself took around an hour. I say in the above assembly steps to take note of the orientation, because it's not obvious which way around the bottom portion of the armrests go, and although there is an L and R on the bottom of the armrests, it also wasn't clear from the instructions which was actually left or right, facing the chair, or in the seated down orientation? Anyway, I ended up putting the bottom portions on the wrong sides, and after securing one of the armrests, I discovered that although it was on the correct side, the armrest base could rotate a full 360°, but not when bolted to the chair, so I had to remove it, rotate it, and then bolt it back on. Truly an Ikea experience! Also, to complicate things further, although all the parts are labeled from A to X (yes, that's 24 parts) unhelpfully, these letters do not appear on the parts themselves or the package with the bolts, screws, and washers. There's also a pair of protective gloves in the box, but I think they were made for much smaller hands than I have. Even my friend, who is 5.1, had difficulty putting them on. Once assembled, I needed to sit down. Anyway, as I said, it looks quite similar to my Herman Miller. And here is the back of it. If you look at the product page and on Amazon, it seems like a lot of thought has gone into the chair itself and what it's capable of, but there is no mention at all about the castors, and this is an area where I think the chair trips up quite quickly. I found it difficult to move the chair in any direction. I asked a friend who came to visit me earlier this week to test my findings, and she said that the wheels were "no good," so it definitely isn't just me. I am 6'2 myself and a big guy, I work from home and gained a few pounds from mostly staying in and the hell away from other people. However, the Doro C300 Pro V2 is rated for up to 150kg (330lbs), which in my case is used well within its max rating. Ergonomics The number of adjustments you can make, right up to setting it in nap mode — which I haven't fully tested yet — is what you'd expect from a premium chair. Yes, you can go up and down (max 7.5 cm adjustment), rock back and forth (with tilt adjustment), and lock the chair between three stages of 105°, 120°, 135°, which is not quite as flat as the AndaSeat I tested at 160°. Some thought has also gone into the "8D" armrests, too, which are cushioned but quite firm; you'll only know it if you press hard into the PU-covered tops, which give about half a centimeter, but it's enough to ensure your skin won't get awkwardly stuck to it in warmer (or sweatier) conditions. It almost feels like plastic and is very easy to keep clean. However, the armrest positions move far too easily, and I am not sure what that "elbow" function is. Maybe it is good for a short person with short arms, anyway, I never used it and kept it flat at all times. There are eight levels of adjustment for the armrests, they are: backwards, forwards, swing left/right, height up and down, tilt, and 360° rotation, which can be handy for desk clearance. As I said, the armrest pads shift far too easily, which could give off an ergonomic vibe, but who wants the armrest sliding when you are shifting weight? The height adjustability does lock into place when lifting and adjusting. Comfort This is ultimately what it boils down to at the end of the day, right? Quite a lot of reviews praise the comfort of this chair, and I don't disagree that the mesh seating is quite comfortable. I am used to the material from my daily Herman Miller. However, the backrest cannot be locked into place, and this is actually a feature; as you shift or recline yourself on the chair, the backrest moves with your body. It took some getting used to. The lumbar gives ample support, but I would have preferred an adjustable one built into the seat base, as this causes the backrest to move up and down at will. Again, as with my previous chair review, this chair is also rated for tall people, but nowhere in the product documentation does it say how tall. Being 6'2 myself, I'm happy to say that the backrest is tall and wide enough, and thought has been given to being able to adjust the neck rest, but as others have mentioned in their reviews, people as tall as 6.2ft is about the limit for the neckrest. Conclusion What I didn't like The footrest is rated for 15kg (33 lbs), which to me seems a bit light, and after looking online, it seems like a chair footrest for adults must be at least twice that rating. In all honesty, they are just hollow metal tubes, so it is not recommended to let a kid sit on them. I also feel like it doesn't really go out far enough for my height, so that kind of puts the dampener on me being able to use it regularly. I'll just have to continue to use my subwoofer as a footrest! I do not like the armrests being able to shift around as easily as they can, and they are a little too forward-positioned in the chair to comfortably sit close to my desk, because even in the lowest height position, they don't allow me to go under the desk like is possible with my Herman Miller. I also feel like this chair could have been delivered partially constructed, especially the armrests on the seat, and why the aluminum base wasn't already pre-constructed (without the castors) is baffling, considering it would have fit in one of the two boxes that way. The instructions also need to be clearer. On the pamphlet, there's an A to X listing (which is also used in the steps), but none of the physical parts use this lettering system! What I did like I'll be honest, I haven't used it for very long, just one week, and seating comfort is subjective after all! Any spills wiped straight off it, the stitching, and the lines look great, not a fray to be seen or stitch out of place. It looks kind of cool, too. My favorite feature of these seats is the nap mode. While you're not lying completely flat, it leans far back enough to make you easily doze off after a heavy gaming or working session. Overall, this chair offers plenty of comfort features. The MSRP does vary quite a bit depending on the region, at £549.99 in the UK, and €580 in Europe, and $599 before tax in the U.S. However, shipping is free, which is a bonus for such a heavy item. Is it worth it, though? At three years' warranty, I think it's a decent deal. Another firm out of Germany sent me a free replacement hydraulic gas spring for a chair that failed after almost four years, so it was well outside its two-year warranty. My advice is to always try, as you might have the same luck I did. If I could fault it at all, it would be the constant shifting of the armrests and backrest. Where to buy Although the footrest variant normally costs $539.99, it has been discounted to $469.99 on the official website in Black or White. In fact, the non-footrest variant is only $40 cheaper. On Amazon, it currently costs more at $499.99 links below. Sihoo Doro C300 Pro V2 for $469.99 (official website) Sihoo Doro C300 Pro V2 for $499.99 at Amazon US SIHOO provided a free sample without any review or pre-approval. Good to know This Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Making US citizens pay is a prominent tool? Joke of the week…
    • Price Drop: Save 86% on Microsoft Office 2021 Professional Plus lifetime digital license by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where you can save 86% on a lifetime license to Microsoft Office 2021 for Windows. This bundle is for families and small businesses who want classic Office apps and email. It includes Word, Excel, PowerPoint, Outlook, Teams, and OneNote. A one-time purchase installed on 1 Windows PC for use at home or work. Lifetime license for MS Word, Excel, PowerPoint, Outlook, Teams, & OneNote One-time purchase installed on 1 Windows PC for use at home or work Instant Delivery & Download – access your software license keys and download links instantly Free customer service – only the best support! Microsoft Office Professional 2021 (for Windows) includes: Microsoft Office Word Microsoft Office Excel Microsoft Office PowerPoint Microsoft Office Outlook Microsoft Office Teams Microsoft Office OneNote Microsoft Office Publisher Microsoft Office Access No faffing about with subscriptions, just classic apps that don't expire. Good to Know ONE-TIME PURCHASE INSTALLED ON 1 DEVICE Redemption deadline: redeem your code within 30 days of purchase Access options: desktop Full versions No subscriptions – no monthly/annual fees Version: 2021 Updates included* *Support for this version of Office ends on Oct 13, 2026 A lifetime subscription to Microsoft Office 2021 Professional normally costs $219.99, but this deal can be yours for just $29.97, that's a saving of $190. For full terms, specifications, and license info, click the link below. Get Microsoft Office Professional 2021 for just $29.97, or learn more Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • The only reason I want to know where you from is because if you are not from the U.K, then why should you care what we in the U.K do or don't do? Racist I am not, I am fed up with the amount coming over here and feel they can come over here and think we need to support them. Do you know how much it costs this country to support these people coming over here? Even when we give them a place to live it is not good enough. We had a barge that was being used to house immigrants, oh but that was not good enough. A mate said to me at the time, when he was homeless, he would have been happy to live on the barge, instead of ending up sleeping on a bench on the beach. I am not scared to say what my family heritage is, unlike you who is scared to say where they are from or where they live. Father side U.S, mother side Wales, still have family living in the U.S. A mate who sadly died a few years ago, had a load of people from different races recording in his studio, I got on with all of them. Skin colour don't bother me, where they are from don't bother me. Religion don't bother me as long as they don't push it onto me and it is not crazy stuff. I am not religious. But if you are not living in the U.K, then why should you care if we are in the E.U or not? This the problem, too many people poking their noses into where it don't belong. But you believe what you believe, if you think I am racist, then be it, I really do not care. Just grow a pair
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      206
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      73
    5. 5
      macoman
      62
  • Tell a friend

    Love Neowin? Tell a friend!