Windows 8 Power Consumption Draining my Laptop Battery Faster than Normal ?

By ShareShiz
in Microsoft (Windows)

 Share

Recommended Posts

Rising Star

ShareShiz

Posted
Posted

So I have actually noticed the past few days, or kind of for awhile now, that my 9cell battery on my laptop just isn't lasting as long as it use to while using Windows 8. I have Windows 8 and Ubuntu dual boot, and it seems my battery lasts longer while using Ubuntu. My battery use to last around 4 hours, 7 hours if I am on power saving mode. However, now I seem to only get about 1min/percent, so about 100ish minutes worth of battery or ruffly 2 hours.

I was wondering if anyone else has encountered the same or similar problem as I have.

... Please no trolling in this thread.

Grand Master

giantpotato

Posted
Posted

:| how do you do that.

http://www.howtogeek...power-settings/

Should be the same for Windows 8. In the last step, advanced power options, there is a settings for processor power management, and there may be another setting for the GPU if you have a discrete card.

  • 2 months later...
Neowinian

Yves Bruyere

Posted
Posted

It's a old thread but I have the same issue and I think to know why. I can heard my fan spinning on my laptop with windows 8 while doing nothing and my task manager is almost at 0% on the processor. I have an HP Pavilion dv7 with AMD 4 core processor and ATI 2 GPU unit. 2 GPU is for one in low power mode and the other in high power mode. ex: while I'm not plugged, it will use the low power GPU instead of the high one.

My low power GPU is a ATI Mobility Radeon HD 4200.

My high power GPU is a AMD Radeon HD 6300M.

But in Windows 8, these 2 GPU unit seem not to be able to communicate with each other correctly. Each need different instance of the driver. I don't know if it was both the same WDDM version 1.1 in windows 7, but I noticed that my high power GPU was using a WDDM version 1.2 and my low power was using WDDM 1.1. Two different drivers model version.

Currently today, if I have the mistake to update my high power GPU in windows update, my graphics on my laptop will run on it even if it's unplugged but in the both case, very slowly. So I have to keep it disabled and at the old version at all time. It's like to have a big issue with my low power GPU. I have to keep that way to keep high performance graphics with my low power GPU if I want to use Windows 8 correctly but not at full speed. Some games I can't play because of that.

At the end, with all that info, my conclusion is both my GPU is running even if I use only one. That I think explain why my laptop is using double the power than needed for nothing.

I don't know about with your laptop, but if you are using 2 GPU like mine, that can confirm my theory.

I would like some feedback about this. Thank you.

Grand Master

Ambroos

Posted
Posted

It's a old thread but I have the same issue and I think to know why. I can heard my fan spinning on my laptop with windows 8 while doing nothing and my task manager is almost at 0% on the processor. I have an HP Pavilion dv7 with AMD 4 core processor and ATI 2 GPU unit. 2 GPU is for one in low power mode and the other in high power mode. ex: while I'm not plugged, it will use the low power GPU instead of the high one.

My low power GPU is a ATI Mobility Radeon HD 4200.

My high power GPU is a AMD Radeon HD 6300M.

But in Windows 8, these 2 GPU unit seem not to be able to communicate with each other correctly. Each need different instance of the driver. I don't know if it was both the same WDDM version 1.1 in windows 7, but I noticed that my high power GPU was using a WDDM version 1.2 and my low power was using WDDM 1.1. Two different drivers model version.

Currently today, if I have the mistake to update my high power GPU in windows update, my graphics on my laptop will run on it even if it's unplugged but in the both case, very slowly. So I have to keep it disabled and at the old version at all time. It's like to have a big issue with my low power GPU. I have to keep that way to keep high performance graphics with my low power GPU if I want to use Windows 8 correctly but not at full speed. Some games I can't play because of that.

At the end, with all that info, my conclusion is both my GPU is running even if I use only one. That I think explain why my laptop is using double the power than needed for nothing.

I don't know about with your laptop, but if you are using 2 GPU like mine, that can confirm my theory.

I would like some feedback about this. Thank you.

That's a driver issue. If you can't get the configuration-specific driver from HP to work in Windows 8 you're out of luck.

I have a hybrid graphics setup too. I can switch between my Intel HD Graphics and a proper nVidia GeForce card but unfortunately Windows 8 doesn't seem to like the drivers for it. The only option I had was to set switching to static in my BIOS, which means I have to reboot to switch between the two - and even then the nVidia Graphics just won't install since even those drivers are incompatible.

It's a common issue with exotic hardware configurations. When your hardware manufacturer no longer provides updates for new operating systems you're basically screwed - and there's not much you can do about it.

  • Yves Bruyere
  • Like 1
Neowinian

Yves Bruyere

Posted
Posted

That's a driver issue. If you can't get the configuration-specific driver from HP to work in Windows 8 you're out of luck.

I have a hybrid graphics setup too. I can switch between my Intel HD Graphics and a proper nVidia GeForce card but unfortunately Windows 8 doesn't seem to like the drivers for it. The only option I had was to set switching to static in my BIOS, which means I have to reboot to switch between the two - and even then the nVidia Graphics just won't install since even those drivers are incompatible.

It's a common issue with exotic hardware configurations. When your hardware manufacturer no longer provides updates for new operating systems you're basically screwed - and there's not much you can do about it.

I guess more for a Microsoft issues with Windows 8 than a driver issue with Windows 8. Because Windows 8, logically, have to run any driver compatible with Vista and Windows 7. But I think is the difference about the driver WDDM version model that is the big problem. I hope that AMD & ATI will correct that soon.

Thanks for your reply.

Neowinian

Yves Bruyere

Posted
Posted

Run the AMD package installer in Windows 7 compatibility mode. Problem solved.

Failed! Same thing than updating driver whit Windows Update. Graphics run very slowly.

I have to Refresh my Windows again, thank you for that.

Mentor

+Neyht Subscriber²

Posted
  • Subscriber²
Posted

I use some modded drivers on my laptop to get the hybrid (or switchable) graphics working. HP has yet to release proper windows 8 drivers for my computer. Which is odd because they have already released some windows 8 drivers for my computer along with a bios update. Trying to install switchable graphics in compatibility mode for windows 7 fails. Windows update will install the latest drivers, but that won't install the components necessary to make them switch back and forth.

Grand Master

Detection

Posted
Posted

Here's a strange thing, my laptop battery is as good as dead, it has around 18% capacity left, which is just about enough keep it in sleep mode for about 1-2 days

With Windows 7 and 8, if I leave the power settings to default, which is the middle option (normal/average) the battery will be dead when I come to use it again the next night, if I set the power options to "High", it will happily stay sleeping for a day or two

Work that one out

Neowinian

Yves Bruyere

Posted
Posted

I use some modded drivers on my laptop to get the hybrid (or switchable) graphics working. HP has yet to release proper windows 8 drivers for my computer. Which is odd because they have already released some windows 8 drivers for my computer along with a bios update. Trying to install switchable graphics in compatibility mode for windows 7 fails. Windows update will install the latest drivers, but that won't install the components necessary to make them switch back and forth.

I look at leshcat and after trying X, Y, Z solution I found at least an half solution to my problem with your suggestion.

The solution I found the most usefull to me now is that:

After installing Windows 8, erase atiilhag.inf and atiilhag.pnf file in C:\Windows\Inf folder.

Uninstall both device in Device Manager, with the first that is not used and the used one after so windows will replace it with his one default.

Install the leshcat driver, a version which is compatible with Windows 8 and the only ones is with a stupid Intel Graphics Unit which it's not my case.

I guess we must stay plugged in or it will select the poor GPU by default which it's not a good idea.

After it's installed and it using the High Performance GPU, don't switch your GPU or we are gonna to get back to the same problem.

You can update your driver with Windows Update so you can have more feature than the driver provided with leshcat.

After all of this, I just have to make sure to not switch my GPU with the Switchable Graphic Application and make sure that the automatic Switch is not checked.

The good point is I can have my High Performance Graphics working correctly.

The bad point, I still have a power consumption problem.

My Low Power GPU unit is under control of the Basic Graphic Driver from Windows, and I think, it is still running even if I don't use it.

Thank anyway Mr. Android. :) It's a good start.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Secure Boot

      By cork1958 · Posted

      Simple answer is yes, you will still get the Windows updates and as long as browser is up to date, you will be good. Only thing secure boot does is protect you against boot level threats and make it harder to install other OS's. I've been looking into this pretty thoroughly lately myself as wifes computer has secure boot disabled plus my other, older computers that run Linux, don't have secure boot enabled. Have seen all kinds of questions about this on the Linux Mint and MX Linux forums. Just don't suddenly enable secure boot now.
    • Ford execs say they made a mistake when they replaced human engineers with AI

      By TsarNikky · Posted

      How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval

      By TsarNikky · Posted

      Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1

      By Copernic · Posted

      AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Why Delta Chat is the best decentralized messenger you have probably never tried

      By zikalify · Posted

      You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.

  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!