Task Manager reporting wrong CPU frequency

By neo1911
in Microsoft (Windows)

 Share

Recommended Posts

Grand Master

neo1911

Posted
Posted

Don't know if this is a bug or a feature but the Windows 8 Task Manager always shows frequency higher than CPU-Z.

When I do CPU intensive task, it shows 5.10 Ghz frequency which is obviously wrong as my i5-3550 has maximum frequency limit of 4.10 Ghz.

fmrpM.jpg

Anyone noticed this? Clean re-install nor updating BIOS helped.

Grand Master

Astra.Xtreme

Posted
Posted

Well your CPU will automatically underclock itself when it's not being used, so that part is probably correct.

But when it displays 5.1GHz, I have no idea what's going on there. Does CPU-Z show the same thing?

Grand Master

xendrome

Posted
Posted

This is normal if speedstep is on and you are using Balanced as your power plan AFAIK.

The CPU will clock down, then clock up to it's standard operating speed. That CPU operates at 3.30Ghz, and Turbos up to 3.7Ghz. Run prime95 on it and you should see it go up to 3.7Ghz.

I don't see where it says 5.1ghz but I don't know why it's showing 4.1Ghz unless you overclocked it

Grand Master

Astra.Xtreme

Posted
Posted
  On 09/10/2012 at 14:15, sanke1 said:

CPU-Z shows 4.1 Ghz. Windows task manager shows 4.8 Ghz or 5.1 Ghz depending on it's mood.

I would definitely say it's a Windows problem then. But you shouldn't be surprised. :rolleyes:

Grand Master

firey

Posted
Posted
  On 09/10/2012 at 14:10, sanke1 said:

Don't know if this is a bug or a feature but the Windows 8 Task Manager always shows frequency higher than CPU-Z.

When I do CPU intensive task, it shows 5.10 Ghz frequency which is obviously wrong as my i5-3550 has maximum frequency limit of 4.10 Ghz.

Anyone noticed this? Clean re-install nor updating BIOS helped.

the newer intel cores have "Turbo Boost". Which will underclock your CPU automagically during low loads. During more CPU intensive tasks it will bring it up to speed. It's possible that when CPUz is launched it doesn't have much load and as such you see a lower speed, whereas I am assuming Windows 8 can take that into account and show the maximum, as well as the current.

Grand Master

neo1911

Posted
  • Author
Posted
  On 09/10/2012 at 14:58, Deranged said:

If you've got the system overclocked then yes, it's probably just showing the max speed under TurboBoost. When only one or two cores are active it'll boost the speeds. http://en.wikipedia....tel_Turbo_Boost

i5-3550 is Non-K edition. It cannot be overclocked.

  • 2 months later...
Grand Master

Mr. Gibs

Posted
Posted
  Quote
i5-3550 is Non-K edition. It cannot be overclocked.

That has absolutely nothing to do with it. Turbo Boost doesn't require a K series processor and is enabled on most of the I-series processors. Basically if it detects that a running program isn't multi-core optimized it shuts off some (1, 2, or even 3) of the cores and overclocks the remaining cores.

For example, my processor is 1.73 but with turbo boost enabled (on 1 core for this example) it rises to 2.93.

What's weird though is Intel says your CPU has a max turbo frequency of 3.7, but Windows is reporting 4.1/5.1 :/ Maybe your motherboard/BIOS is reporting the wrong CPU?

Grand Master

neo1911

Posted
  • Author
Posted

^^ Motherboard and Bios are reporting the exact CPU which I purchased. It's just that Windows Task Manager reports incorrect frequency compared to CPUz or any other CPU freq monitoring program.

This issue has nothing to do with overclocking. The new Task Manager in Windows 8 is incapable of reading correct CPU speeds in some cases. I call this Windows bug.

Grand Master

farmeunit

Posted
Posted

People replying about Speedstep, try reading again. Looking at the pictures will help explain, also. That's what they're there for.

That being said, I've not seen that, but I generally use slightly older processors. Maybe it's the way the newer ones are seen by the OS?

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Some AMD Ryzen users can get free Windows performance boost with this simple system tweak

      By hellowalkman · Posted

      Some AMD Ryzen users can get free Windows performance boost with this simple system tweak by Sayan Sen AMD understands that there is a lot of demand for its X3D processors and for good reason too, since they offer some of the best gaming experiences. As such, the company plans to launch a new 6-core Ryzen 5 9600X3D for those who may not want to spend top dollar on a 9800X3D. What makes X3D special is the densely packed last level cache (LLC) wherein the L3 (level 3) cache is 3D die-stacked such that there is a whole lot of it that the cores can access on demand all within the smallest footprint. This is said to help with latency especially, and games happen to be quite sensitive to it since they are a mixed workload and so there is a lot of to-and-fro. However, despite that fact, users have noticed micro-stuttering and freezes on Ryzen X3D CPUs. Although there is no official fix, some of the affected users have managed to resolve the issues by tweaking a motherboard setting. The tweak is related to a setting called "GLOBAL C-STATE CONTROL" (it may be called something else by your motherboard vendor) and changing it to 'Enabled' from 'Auto' could fix stuttering and lag-related issues in games. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states or C-states. While P-states or performance states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, are disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked. The Global C-state control setting helps users manage not only the DF and CPU core C-states but also the I/O C-states too. For those wondering, DF here refers to Data Fabric or AMD's high bandwidth Infinity Fabric interconnect between CPUs, GPUs, and more, on AMD systems. By default, this is set to "Auto" which also means that it is "Enabled" by default. However, in the case of X3D parts, Auto may set this setting to "Disabled" and thus manually toggling it to "Enabled" may be necessary. X3D processors, the dual CCD (core complex die) ones especially, have their V-cache on a single CCD. If the CPPC (Collaborative Processor Performance Control), which lets an OS like Windows control the "preferred core" and clock speed boost, isn't working optimally to assign the correct gaming CCD, then this fix could well work. Global C-State Auto: Global C-State Enabled: We ran a benchmark on our Ryzen 9 9950X3D to see if toggling the settings would make a difference, and well, it didn't in the case of AIDA64. However, since this is a synthetic test that measures cache and memory exclusively, we can't definitively conclude that the fix will also not make a difference in the case of games. Another remedy for stuttering is to disable the monitoring of the "Power percent" metric on MSI Afterburner if you have it on. This has been a long-known issue and in fact can help you even if you are not using an X3D CPU. Source: Reddit (link1, link2) via YouTube
    • Another win for EU users? Ads in WhatsApp won't be coming this year

      By Neonix1 · Posted

      I only have one contact on WhatsApp. And that contact has sms also. I have many more contacts that use WhatsApp also, but everyone defaults to use iMessage, SMS or RCS anyway. Not a loss for me. I'm in Norway where mostly nobody uses WhatsApp.
    • Apple releases massive slide deck to help children convince their parents to buy them a Mac

      By sinetheo · Posted

      Apple is boring for a kid. Only fun is browsing websites for HTML games. A PC with steam is another story. Of course if the child plays video games all day then maybe that might not be a good idea. :-)
    • You will soon have fewer reasons to open Control Panel in Windows 11

      By bobsled · Posted

      Looking for a specific setting in Settings? Sorry, the option just doesn’t exist as you’d need to elevate for that. Want to do something quickly and efficiently? Nah, forced to use a “modern” interface which takes far longer to achieve what you’re looking to do. (Example: disable a NIC)
    • Apple releases massive slide deck to help children convince their parents to buy them a Mac

      By bobsled · Posted

      Yet the best laptop for all day battery life is a Mac, hands down, no contest. Windows is bloated and power management is rubbish. Search indexer. Defender. Malicious Software Removal Tool. Windows Update (+DISM). Office CTR. Telemetry. Disclaimer: I own a surface laptop studio, multiple gaming desktops, server, and a macbook pro.

  • Recent Achievements

    • One Month Later
      DecaffKnight94 earned a badge
      One Month Later
    • Dedicated
      S.P earned a badge
      Dedicated
    • One Month Later
      adxnksd42031 earned a badge
      One Month Later
    • Rising Star
      aphanic went up a rank
      Rising Star
    • Contributor
      GravityDead went up a rank
      Contributor

  • Popular Contributors

    1. 1
      +primortal
      663
    2. 2
      ATLien_0
      261
    3. 3
      Michael Scrip
      234
    4. 4
      Steven P.
      161
    5. 5
      +FloatingFatMan
      151
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!