Can you install Windows 8 upgrade on a totally empty (ie new) drive?


Recommended Posts

Seems reasonable, a person paying something... anything for your software still beats them just pirating it even if they are technically violating the EULA. I'm sure there will still be people that will refuse to pay regardless of how cheap it is, but in my opinion Microsoft have done a lot towards encouraging people not to pirate Windows with their low pricing.

They're probably banking on their new AppStore for the revenue stream these days - on the general consumer side at least!

This. They're selling Windows 8 for a very low price and banking on users purchasing apps or using apps with advertising from the Windows Store, knowing that once users have invested in a platform they're less likely to leave for another. The problem comes when Microsoft makes so much money through the Windows Store that they decide to add restrictions to - or eliminate altogether - x86-64 applications to a future version of Windows, as they don't make any money on those sales.

The only thing that defines what keys windows can and cannot accept is pkeyconfig.xrm-ms. So do a clean install and plop in the file that would accept the upgrade key, slmgr -ipk and boom, you're good. Might be a violation in technical terms but screw it, it gets you around the inconvenience. OR just use MSDN media, because for some weird reason that works with upgrade keys on clean installs.

The only thing that defines what keys windows can and cannot accept is pkeyconfig.xrm-ms. So do a clean install and plop in the file that would accept the upgrade key, slmgr -ipk and boom, you're good. Might be a violation in technical terms but screw it, it gets you around the inconvenience. OR just use MSDN media, because for some weird reason that works with upgrade keys on clean installs.

Multiple people have already tried the MSDN media with the upgrade keys, and unless you do some tweaking it fails activation.

People have also already posted a way to make it work regardless. My point was that straight upgrade keys on a plain ISO without any sort of workaround will not activate without a valid prior OS install...which is the case. :p

Question: can you use the Windows 8 upgrade disc to format/reinstall a previous installation of the same upgrade disc? I like to do an annual formatting and am wondering if the upgrade disc will work.

ty

Question: can you use the Windows 8 upgrade disc to format/reinstall a previous installation of the same upgrade disc? I like to do an annual formatting and am wondering if the upgrade disc will work.

ty

Yeah that is usually just fine...but why do that when you can just do a refresh? It accomplishes the same thing...and why do a yearly reinstall? It's more of a placebo than anything when you do that.

Also, the License (EULA) which will be shown to you upon install also depends on the [Channel] config set in ei.cfg.

For Windows 8 and Windows 8 Pro, it is as follows:

Retail

[Channel]
_Default

[VL]
[/CODE]

OEM

[CODE][Channel]
OEM

[VL]
[/CODE]

Enterprise

[CODE][Channel]
Volume

[VL]
1[/CODE]

These EULA's are present in:

C:\Windows\System32\Licenses\neutral

[CODE]_Default = EULAID:Win_RM_2_PS_R_en-us (WINDOWS 8 PRO).

OEM = EULAID:Win_RM_3_PS_O_en-us (WINDOWS 8 PRO).

Volume = EULAID:Win_RM_1_PS_V_en-us [/CODE]

Can confirm this works with puchased retail copy (both 32/64)

-Install new drive

-Use upgrade key to install

-Can use express setting during install

-Run regedit (from desktop right click lower left of screen-Run)

-Go to: HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE/

-Change MediaBootInstall from 1 to 0

-Run command prompt as administrator (from desktop right click lower left of screen-Command Prompt Admin)

-Type slmgr -rearm (wait for box to confirm rearm)

-Move mouse to lower right of screen,(opens "charm bar") pick Settings,Power,Restart

-From desktop right click lower left of screen-Run slui.exe 3

-Enter your upgrade key,activate (will take a couple seconds)

-Restart your computer (this step needed to change themes ect)

Done.

  • Like 2

microsoft have in my view always tolerated piracy, even one of their PR people or an exec (Cant remember which) has said in public its helped them get market share.

Technet eg. was abused a lot, people paying for 1 year, grabbing keys and then using them for life, microsoft tolerated this, what they didnt like tho was people selling technet keys on ebay hence the restrictions that got added to technet. Although I think microsoft have now decided they wont tolerate people paying for just 1 year anymore as they now I believe disable keys after a subscription ends.

These upgrade keys as I understand it the same rearm trick was used in windows 7, since the trick hasnt been closed I assume microsoft are ok tolerating it because at the end of the day a upgrade sale is better than no sale. Looking at how much a OEM windows 8 pro costs, I cant see many people buying it.

Here is what worries me.

Currently I have numerous windows 7 technet keys which are 10 activations each. One is used on this PC and one on my laptop, currently I have no immediate plans to upgrade to win8 but I suspect I will do at some point, where there is apps to use win7 aero themes etc.

I have no idea when doing an upgrade which key windows 8 uses as a upgrade eligibility key, does it use the key on the pc when running the upgrade assistant? does it use the key on the windows install during the install process? because it doesnt ask for one during installation.

The keys I wanted to use is the vista oem key for my laptop and a win7 retail key for a unused boxed copy I have here in my my bedroom.

It would seem assuming the key isnt grabbed when the upgrade assistant is run that if this registry workaround is used then no eligibility is checked and as such no old keys get deactivated?

yes you can, just like vista and 7 you can do a clean install on a fresh drive, either call in the key or install windows 8, let it fail activation, rerun the setup from within the os and the upgrade will work.

Or simply do the one registry tweak after installing Win8 on a blank drive and re-arm then reboot; the method was listed earlier in this thread. Windows will then activate without a hitch. :) The way you listed works too; I've done it both ways since Win8 was released. But the registry/rearm method is a bit quicker since you won't have to install twice.

That's what I was referring to when I said that it used to be the disc that determined the install type. There used to actually be upgrade/full install discs...and as long as you knew what you were doing you could use an install key to do a full install.

This is no longer the case since the key itself determines what happens. :)

This is my last time stating this, and it is fact not supposition. So please do not keep posting your doubts over and over again.

The KEY determines the install type, not the media.

The difference is who still has a base OS install that is eligible for upgrade vs those who do not. NOTHING prevents a clean install using those keys as long as there is still a base OS installed. You can reboot and do a completely clean install with the upgrade discs...as long as there is a base OS still present on the HD...you can even wipe the HD once it verifies an eligible license is present.

You know I've often wondered about the last part of what you said. I have always wondered how the disc knew if you had an eligible OS upgrade after you wiped it / rebooted then re-installed windows. Isn't the hard drive empty at that point? Or does it store a tiny bit of info after it formats the drive? Just the programmers curiosity coming out on that one :)

You know I've often wondered about the last part of what you said. I have always wondered how the disc knew if you had an eligible OS upgrade after you wiped it / rebooted then re-installed windows. Isn't the hard drive empty at that point? Or does it store a tiny bit of info after it formats the drive? Just the programmers curiosity coming out on that one :)

It stores that data in RAM if I remember correctly.

so technically if you wiped the drive and turned off the computer it wouldn't remember the information. Lets hope we don't get a power outage while upgrading with a clean install :) But thanks for the heads up. That question has been quietly nagging at me for years I've just been too lazy to look it up.

so technically if you wiped the drive and turned off the computer it wouldn't remember the information. Lets hope we don't get a power outage while upgrading with a clean install :) But thanks for the heads up. That question has been quietly nagging at me for years I've just been too lazy to look it up.

Exactly. That's how it is supposed to work. I've never tested that scenario. However I do believe if you've wiped the drive, but started the install process that's one of the first piece of info that gets committed to the drive. So it should still allow you to complete the install as long as it had started.

  • 2 weeks later...

from personal experience the upgrade product keys will work on anything, they don't check if you already have anything installed or not, and they let you clean install. It might not be morally right for some to not pay full price, but charging 40 bucks is the only way you'll get some people to pay for windows at all, so it's an effective strategy in it's own right. Just buy the upgrade and be happy. If you want to be really evil, you can tell them you bought a netbook after June 2012 and get it for 15 bucks. I did that with one of the three product keys I purchased. I had a netbook with product key ready though when I found out I didn't need a product key.. I was just going to lie on the date I purchased said netbook.

Ive not read this whole topic(Don't have time its huge) but I have now for the third time activated windows 8 pro with a upgrade key by installing it in a hard drive with a NONE activated copy of windows on it. I formatted the drive in the setup and windows was activated immediately after installation.

Easy.

I am eligible for the upgrade anyway so don't see a problem.

Ive not read this whole topic(Don't have time its huge) but I have now for the third time activated windows 8 pro with a upgrade key by installing it in a hard drive with a NONE activated copy of windows on it. I formatted the drive in the setup and windows was activated immediately after installation.

Easy.

I am eligible for the upgrade anyway so don't see a problem.

Too bad you didn't read the thread. You would have found multiple posts where I pointed out that what you did is normal and has pretty much always worked.

;)

Sorry just thought Id help anyone out if it hadn't been noted. I did however on one install get a message saying this key is not for clean installations. Had to format and install again. Think it was because I didn't enter the correct key in the setup but rather I used one I got off the internet so I could verify windows 8 ran ok on the said computer first. Loving windows 8 now Ive got used to it.

This topic is now closed to further replies.
  • Posts

    • Ummmm that is what is it supposed to do. Just turn if off in settings if you do not want it analyzing your open tabs. Chrome does the same thing with Gemini. Sarfari will do the samething after Apple's AI and even more so with the release of their 27 versions that is now powered by Googles LLM/ML models. Understanding why it is doing it and how it can help you vs jumping to some conspiracy theroy is a much better approach. As long as it can be turned off, all is good. Yes the default should be off but the a lot of people would never discover these features.
    • Just another reason (aside from many others) not to use Edge. Firefox 153.0b5 DEx64 has a similar feature added recently in prior builds that I will turn off at some point when I get around to it. It's the new "Something looks suspicious" page that pops up here and there. It cleverly hides itself between web pages that I've actually visited; as a result, you know, of selecting a web page and telling the browser where to go. The interesting thing is that it does not produce these warnings from pages that I, as the only intelligent user of the browser in my system, have ever directed the browser to open! What seems to be happening is that the browser looks at all the goofy ad links on a web page I do actually open and selects one that "looks suspicious" and then creates the "something looks suspicious" web page, which is neatly inserted, as mentioned, between web pages my RB ("real brain") has directed the browser to load in a session. The thing is, I usually look at links I am considering to follow before I ask the browser to load them, and in cases I have noticed where the link does indeed look suspicious, most of the time I will choose to not follow the link at all. Doesn't everyone do this or something similar? I am picky about what I voluntarily load... (I don't like links that start off fine, with a site designaiton that seems normal enough but then is followed by indecipherable alphanumeric strings many, many lines long, etc. I tend to reject those because they look suspicious. They may not be, but I don't care... I'll stay with Firefox, of course, if for no other reason than they usually let you turn off the junk you don't like. And because it isn't Edge... But at some point Microsoft will come to realize that putting your bookmarks on the left side is a Good Thing for a lot of people, just as Microsoft discovered when it had the bright idea of nailing the Windows taskbar to the bottom of the screen, when for decades Microsoft browsers had left that placement up to the user. They have finally reversed the obscenity of that decision. Finally.
    • Google was using the old CATPCHAs data to train their LLMs. What is the say they won't use this camera data of users to train their LLM? these companies need some strict regulations!
    • Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      258
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      94
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!