Big amount of written data to ssd (several gigabytes)


Recommended Posts

Before you tell me this is not a Windows 8 issue but the software I use and how I use it, I need to clarify.

When I was using Windows 7, I monitored the written bytes to my SSD drive because I was worried about write cycles. I learned to forget about it and just use the disk and don't bother with stuff like moving the Firefox profile and cache to an HDD, which kind of kills the whole purpose of having an SSD. Anyway, after using the computer for a whole day, both me and my brother, the amount of written bytes to C: wasn't too big - around 1GB, sometimes more, sometimes less. This is without modifications to software - no Mozilla profiles, pagefiles, etc, were moved to HDD.

Now on Windows 8 it's a little weird. After a day of computer use (8 hours or more), I have between 6 and 11GB written to C:! I don't use too much applications - it's pretty much Firefox, an instant messenger, foobar, Gimp... there's just no way anything should write THAT much to the disk.

I tried running procmon, filtering the results by written files or filtering by C:\, but during monitoring there was almost nothing written to the disk. After using Firefox for a while, I check the written bytes and... additional 6GB suddenly have been written. So I moved the profile and cache folders to HDD, to see if it changes anything, but it did not, so I went back to using the SSD for them. My research was fruitless. I could not identify what is writing so much data. Firefox and the People app wrote the most, likely because of storing web cache on the disk, but the amount of these writes is very small and should never reach over 10GB within a few hours.

I use DiskCountersView to monitor the amount of read and written data. For a second, I thought this program might not be compatible with Windows 8 and show weird stuff because of that, but a friend of mine does not have this issue. He has about 1GB written, after a few hours of browsing the web, watching movies, etc.

I have scanned the whole system with the built in Defender, Malwarebytes Antimalware, SpyBot and they didn't even find something suspicious. The system is 100% clean. The situation did not change after reinstalling the whole system from scratch (due to other reasons). I don't use hibernation, only fast boot. System Restore very rarely creates new restore points and I doubt they would be big enough to generate over 10GB's of data.

So I ask here :) Is this normal for Windows 8 to write so much to the C: partition? If so, why? :p If it is not normal, then do you have any recommendations about how should I investigate further? I know this amount of writes won't suddenly kill my SSD (or at least shouldn't ;)) so I could probably forget about it, but putting SSD life expectancy aside... what could possibly be in those tens of gigabytes? :p

Thanks in advance for any tips.

What's your drives sector size? Each sector is usually about 4KB, spread unevenly across a drive, on the drive you also have 'blocks' of a set size, when you read or write to these blocks, you get or write to the WHOLE block so writing where 2 files are storage would require reading the contents, modify one of the files and then write back the new block. Maybe that's why firefox is using a lot?

If you've got an SSD, why have you not set firefox's cache to memory only?

My disk is Kingston V200, 128GB. It has 4kB sector size, the NTFS partition has 4kB cluster size. Firefox is not the cause of the problem. Setting its cache to memory only is interesting and I'll read about that, but it won't eliminate my problem with ~10GB writes on a daily basis... because, as I said, I tested with the cache and profile folders move from the SSD to HDD. The SSD still had many gigabytes written to it on random occasions, usually when idle - say, I see 1GB written in DiskCountersView, I go out of the room for a few minutes, come back to my PC and see 6GB written :p

No, I haven't. That's the most weird thing - at least some of the huge writes occur when the computer is idle.

I also used Task Manager, Details tab, and added the column "I/O write bytes". No running processes ever have more writes than a few hundred megabytes, and after suming them up... it's still a few hundred megabytes, not dozens of gigabytes...

I've noticed that the space used on C:\ varies a lot on Windows 8, I think it's to do with the way the system is shut down as after a reboot it will go back to 74GB available but if it's been running for a few days it goes down to about 70GB. I'm running a 120GB OCZ Agility 3 SSD but I'm not particularly fussed about this. I take the attitude that I bought the device to use it, not to keep thinking about how many write cycles it's doing. It will probably take years before it causes any issues with the drive at which point I would have upgraded anyway.

This seems to be consistent with the Windows 8 install on my netbook which also seems to free up a few gigs of space after being rebooted after being running for a few days.

I don't care about the disk space used. It's pretty much stuck at 89-91GB free.

I disabled the hiberfile, disabled fast boot, disabled the pagefile. After booting and launching a few applications: ~100MB write bytes. That's how it should be. So i start up ARMA2 for 5 minutes. Exit. Writebytes: over 1GB.

The game is *not* saving anything but a few config files in Documents and %appdata% nearly a 1MB total.

So:

- Firefox is not writing gigabytes to disk

- games are not writing gigabytes to disk

- but diskcountersview says gigabytes have been written

I wouldn't care about this, as the SSD drive has been bought to be used and be happy about the speed gains. But, Windows 7 wrote about 1GB of data after a few hours of use. The same kind of use on Windows 8 generates tens of gigabytes of write files. A friend of mine with Windows 8 has a few hundred megabyte write files after a few hours of system and app use.

So, I don't really have a problem with SSD wear. I don't care, I'll buy a new one when this one dies. The thing that troubles me is what the hell is being written to the disk so much, to generate ~10GB of write files. Interesting thing is, my free hard disk space doesn't go below 89-91GB, ever. So it's also not my complaint, that I'm suddenly 10GB of disk space less. I am not. The total amount of disk write operations sums up to ~10GB per day, which is ~10 times more than on Windows 7. Is this how Windows 8 works?

I thought about it too, that DiskCountersView is somehow not compatible with Windows 8, similarly to how LatencyMon and other DPC monitoring software are, and is simply reporting wrong.

But a friend of mine is also using Windows 8. His computer usage is similar to mine, too - 99% of the time is spent in Firefox. Default configurations on both computers. He tells me DiskCountersView is reporting several hundred gigabytes of write file operations.

As I said, I'm not paranoid about SSD wear. It just bothers me what the hell is going on :p

edit - could you run this program http://www.nirsoft.n...nters_view.html and tell me how much bytes you have in the Write bytes column, on the C: drive? Also, how long is your system running since the last restart. One more thing - due to how fast boot operates, shutting down the system and starting again, does not reset the counters. So the amount of write bytes can be huge if you have not restarted the system recently.

  • 2 months later...

I have bad experience with Firefox - even with prefetch off and disk cache off, it writes over 2 GB of data per day with not heavy browsing. It seems it is because of permanent rewrite of approx 10 MB places.sqlite file. Every new web page or link open adds about 11 MB in Process Explorer I/O write bytes, the datetime of the file is changed but the total size is almost constant.

Anyway, rewriting of file consumes the same amount of work from SSD and it eats from its life...

If this is true assumption, thanks a lot mozilla & sqlite. It does not mean Chrome is much better :-) Try to watch process explorer for a while when browsing.

I can understand if you want to figure this out to know what is going on, but I would not worry about the SSD and its' life. The life of that SSD will outlast that computer and you are going to buy a new SSD for a new computer build before that drive ever looses space or performance. Get some sleep :)

This topic is now closed to further replies.
  • Posts

    • How many other companies will follow Ford's lead? Or, have they already gotten lazy and become enslaved to AI--and now can't figure out how to get out of that mess.
    • Why would any self-respecting intelligent person follow any recommendation by Donald's GOP administration? With almost two years of fabrications, deceit, and blatantly illegal behavior, why believe them now? They had best be gone after the November 2026 election, so we'll wait and see.
    • AltSendme 0.4.1 by Razvan Serea AltSendme is a minimal, cross-platform application designed for fast, secure, and private peer-to-peer file transfers. It allows users to send files or entire directories directly between devices without relying on cloud servers, accounts, or any personal information. Everything is encrypted end-to-end using modern protocols like QUIC and TLS 1.3, ensuring both strong security and low-latency performance. Transfers are verified with BLAKE3 for data integrity, and interrupted downloads automatically resume, making the experience reliable even on unstable connections. You can transfer anything—images, videos, documents, and more. Integrity checks are performed on both ends, so your files are automatically verified for correctness during both sending and receiving. AltSendme works seamlessly across local networks or long-distance links, capable of saturating multi-gigabit connections for extremely fast delivery. With built-in NAT traversal and encrypted relay fallback, it connects devices almost anywhere. The app integrates with the Sendme CLI and will soon support mobile and web platforms. Fully free and open-source, AltSendme offers a lightweight, privacy-first alternative to traditional cloud-based services, removing size limits, upload costs, and unnecessary data exposure. AltSendme 0.4.1 changelog: Release Highlights Self-hosted relays: Run your own iroh relay so transfers don't rely on public infrastructure. Includes a full deployment template in deploy/relay/ with Docker Compose for a VPS and configuration examples for production use. Fly.io support: One-click deploy template for Fly.io, including a quick-start config (fly.dev.toml) for testing without a custom domain, plus production setup with Let's Encrypt and your own hostname. Relay settings UI: New Settings → Network panel to choose how AltSendme connects: automatic public relays, custom self-hosted URLs (with optional auth token), or disabled. Test connections, verify latency, and see live relay status in the footer. Disable relays: Turn off relay servers entirely when you only need same-network transfers (e.g. LAN). Direct connections only. No relay hop required when devices can reach each other. Android graduates from beta: Android is now part of the regular release cycle alongside desktop. APKs ship with each version (universal, arm64, and armv7). Other improvements Private relay access control via shared auth token Relay fallback notifications when a custom relay is unreachable Broadcast mode toggle in sharing settings Android release build fixes (split-per-ABI APKs, universal APK preservation) UI polish: mobile safe-area insets, dropzone layout, transfer progress animation Bug fixes for minification-related serialization issues and system tray icon loading What's Changed feat(relay): add relay status functionality and settings UI (a120cdf) feat(relay): implement custom relay server configuration and verification (51276c7) feat(relay): add configuration for private relay access and enhance observability features (48fbabf) feat(relay): enhance relay URL validation, display connection status (d4fffa0) feat(relay): add RelayChangeGuard component and enhance relay-related translations (16ba514) feat(broadcast): add toggle setting for broadcast mode in sharing UI (ca6d977) fix(relay): correct QUIC discovery port, pin image, templatize fly.dev (52a2ba5) fix: More broken serialization due to minification (67491a9) fix(android): preserve true universal APK across per-ABI builds (e9f256f) fix(ui): conditional safe-area insets padding on mobile (1182f0e) refactor(transfer): CircularRing component animation fix (944572b) chore(android): drop x86 and x86_64 release APKs, keep universal+arm64+armv7 (34ada0b) Download: AltSendme 0.4.1 | ARM64 | ~9.0 MB (Open Source) Download: AltSendme for MacOS | Android Links: AltSendme Home Page | GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are mostly right about the ephemeral nature of it. As I mention in the article, if you dont add a second device or take a backup of your account before uninstalling it, then yes you will lose access to your account. That said, in terms of actual user experience when you sync multiple devices your message history carries across and there's also a Saved Messages chat like there is on Telegram to send messages and attachments between your installs. But yh, what you point out are correct and its not trying to emulate Messenger or Telegram.
    • OK so SearXNG is a meta search engine that you can install locally or use via a public instance. It scrapes other search engines which you choose and then sorts the results. Not as complicated as multiple relays
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      495
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!