TiWorker/TrustedInstaller/WUDFHost/WMIADAP and WMIPRVSE running constantly


Recommended Posts

So are these supposed to be running constantly on Win8 Pro x64? Also, when these are running, I can also catch msiexec running also. I shouldn't think they would. But the last few days they have been. Maybe it's time for a reformat? Any ideas?

I have researched all of them and they seem legit:

One could be running because you have a portable Usb drive attached-

Visual Studio installed or a program that has it installed.

I would probably do a Windows Update then a reboot.

Another may be if you have Chrome installed -- I would go into the options and about then check it for updates- quite possibly the "trusted installer" may be that trying to update in the background.

"Maybe it's time for a reformat?"

So you have had the OS installed what 3 minutes, guess its time for a format :rolleyes:

Thanx for the blatantly uneeded, not to mention, unwanted, sarcasm. If you have nothing informative to add, you can just walk away. Thank you.

Thanx for the blatantly uneeded, not to mention, unwanted, sarcasm. If you have nothing informative to add, you can just walk away. Thank you.

This may sound crazy-- but I found another board that suggested these fixes.

Call up "services.msc" look for the ones dealing with the Windows Installer then stop the service as well as the WMI 's.

The WMI it suggested stopping and starting it.

It was also suggested to look for the c:\windows\prefetch then delete all that is in there and reboot-- "this may take some time for it to restart" (some may say this does nothing , but two people said it helped the process stop quicker after first install)

Those suggestions - I saw say fix 1/3-1/2 of the issues you described.

This may sound crazy-- but I found another board that suggested these fixes.

Call up "services.msc" look for the ones dealing with the Windows Installer then stop the service as well as the WMI 's.

The WMI it suggested stopping and starting it.

It was also suggested to look for the c:\windows\prefetch then delete all that is in there and reboot-- "this may take some time for it to restart" (some may say this does nothing , but two people said it helped the process stop quicker after first install)

Those suggestions - I saw say fix 1/3-1/2 of the issues you described.

Thanx redvamp. Will try that.

Edit:

Ok did the above. So far only wmiprvse has started up. Will see what happens and report back.

Thanx redvamp. Will try that.

Edit:

Ok did the above. So far only wmiprvse has started up. Will see what happens and report back.

One of the fixes said probably -- the installer itself never gave the successful termination and therefore keeps running... By stopping the service it won't start again until you install something. That will probably give a successful termination.

The Wmipvse - the suggestion of that restarting was that it would try again to finish successfully.

Other than doing a defragmentation (unless you have an SSD) I have not found much on the rest of the services.

One of the fixes said probably -- the installer itself never gave the successful termination and therefore keeps running... By stopping the service it won't start again until you install something. That will probably give a successful termination.

The Wmipvse - the suggestion of that restarting was that it would try again to finish successfully.

Other than doing a defragmentation (unless you have an SSD) I have not found much on the rest of the services.

I'm not sure when this actually started. But I'm thinking it was when I installed the Win8 app for The WB. So should I maybe try and uninstall that app and see what happens if the problem reoccurs?

I'm not sure when this actually started. But I'm thinking it was when I installed the Win8 app for The WB. So should I maybe try and uninstall that app and see what happens if the problem reoccurs?

Well if the application works-- I would not mess with it-- it is possible and is a common error with bad coded applications.... they don't tell the installer they are done and usually does not get cleared out until the next thing that is installed or a reboot.

Well if the application works-- I would not mess with it-- it is possible and is a common error with bad coded applications.... they don't tell the installer they are done and usually does not get cleared out until the next thing that is installed or a reboot.

Well, the app works for the most part. But when I try and watch a full episode of something, it actually takes over a minute for it to load the show and then stutters like Hell. So I haven't really used it.

Well, the app works for the most part. But when I try and watch a full episode of something, it actually takes over a minute for it to load the show and then stutters like Hell. So I haven't really used it.

I would probably look for some program options-- sometimes they have things like pre-loading or flash storage (if flash) usually through the right click. Either that or disk space usage.. sometimes if flash based you could go for the quality and set that to medium. In some cases that takes the skipping out.

I would probably look for some program options-- sometimes they have things like pre-loading or flash storage (if flash) usually through the right click. Either that or disk space usage.. sometimes if flash based you could go for the quality and set that to medium. In some cases that takes the skipping out.

Yea, they don't have any settings at all.

This topic is now closed to further replies.
  • Posts

    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
    • >Improved system sounds when using Windows in dark mode. The story behind that bug would be an interesting one.
    • Edifier S3000MKII hi-fi audiophile grade bookshelf speaker is at its lowest price now by Sayan Sen Yesterday we covered a bunch of Dolby Atmos soundbar deals with several ones from Sony, as well as from JBL, Samsung, Polk Audio, and more. You can check them out in this dedicated piece. Those are not audiophile category speakers though as they are built with home theater use in mind. If you are searching for the former then Edifier has its S3000MKII at its lowest price at the moment (purchase link under the specs table down below). This is a two-way bookshelf monitor speaker designed to produce accurate sound. While it may not produce the best high-fidelity audio possible out there, it should still be significantly better than what you will get on soundbars of this price range. As such it will do justice to high-res audio played back through it. The only thing that may feel lacking is sub-bass as Edifier claims the unit can go down to 38 Hz, which should be enough for studio monitor purposes, but not for deep room-shaking rumbling bass. Where this does excel though is in its treble reproduction. With its super-tweeter, it claims to go as high as 40 kHz in the frequency spectrum, which should offer a sense of "air"yness. This is an active speaker which means it packs its own amplfication. It has a top-notch Class D amp that may be able to rival many Class AB designs too in terms of sound reproduction quality. The technical specs of the Edifier S3000MKII are given in the table below: Specification Value RMS Output Power 256W RMS (Treble: 8W × 2, Mid-Low: 120W × 2) Tweeter Driver 107mm × 107mm Planar Magnetic Tweeter Mid-Low Driver 6.5-inch (179mm) Long-Throw Aluminum Diaphragm Driver Frequency Response 38Hz – 40kHz Signal-to-Noise Ratio ≥ 85dB (A) Bluetooth Version Bluetooth 5.0 Bluetooth Codec Qualcomm® aptX™ HD Wireless Speaker Link Proprietary 5.8GHz wireless connection between speakers Supported Hi-Res Audio Hi-Res Audio Certified, up to 24-bit/192kHz Digital Processing XMOS XU216 Digital Signal Processor Audio Inputs Balanced XLR, Optical, Coaxial, USB Type-B, Line In, Bluetooth Input Sensitivity (USB) 400 ± 50mFFs Input Sensitivity (Optical) 400 ± 50mFFs Input Sensitivity (Coaxial) 400 ± 50mFFs Input Sensitivity (Bluetooth) 450 ± 50mFFs Input Sensitivity (Balanced XLR) 1000 ± 50mV Input Sensitivity (Line In) 600 ± 50mV ADC Capability Up to 24-bit/192kHz DSP Capability Up to 24-bit/192kHz DIX Capability Up to 24-bit/216kHz DAC Capability Up to 32-bit/384kHz XMOS Processing Power Up to 2,000 MIPS Edifier S3000MKII Audiophile Active (Powered) Wireless Speakers: $799.99 (Sold by Edifier US, Shipped by Amazon US) If you do not have the kind of budget to spend on the S3000MKII, you can also check out the Edifier R1280Ts which is right now on sale at just $114 (its lowest price in a very long time). Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • > The G 7 Pro supports wireless (XBOX Wireless, proprietary dongle, or Bluetooth) If anybody else's brain translates this to 'it works wirelessly on Xbox', according to the linked product page, it does not.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      442
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!