TiWorker/TrustedInstaller/WUDFHost/WMIADAP and WMIPRVSE running constantly


Recommended Posts

So are these supposed to be running constantly on Win8 Pro x64? Also, when these are running, I can also catch msiexec running also. I shouldn't think they would. But the last few days they have been. Maybe it's time for a reformat? Any ideas?

I have researched all of them and they seem legit:

One could be running because you have a portable Usb drive attached-

Visual Studio installed or a program that has it installed.

I would probably do a Windows Update then a reboot.

Another may be if you have Chrome installed -- I would go into the options and about then check it for updates- quite possibly the "trusted installer" may be that trying to update in the background.

"Maybe it's time for a reformat?"

So you have had the OS installed what 3 minutes, guess its time for a format :rolleyes:

Thanx for the blatantly uneeded, not to mention, unwanted, sarcasm. If you have nothing informative to add, you can just walk away. Thank you.

Thanx for the blatantly uneeded, not to mention, unwanted, sarcasm. If you have nothing informative to add, you can just walk away. Thank you.

This may sound crazy-- but I found another board that suggested these fixes.

Call up "services.msc" look for the ones dealing with the Windows Installer then stop the service as well as the WMI 's.

The WMI it suggested stopping and starting it.

It was also suggested to look for the c:\windows\prefetch then delete all that is in there and reboot-- "this may take some time for it to restart" (some may say this does nothing , but two people said it helped the process stop quicker after first install)

Those suggestions - I saw say fix 1/3-1/2 of the issues you described.

This may sound crazy-- but I found another board that suggested these fixes.

Call up "services.msc" look for the ones dealing with the Windows Installer then stop the service as well as the WMI 's.

The WMI it suggested stopping and starting it.

It was also suggested to look for the c:\windows\prefetch then delete all that is in there and reboot-- "this may take some time for it to restart" (some may say this does nothing , but two people said it helped the process stop quicker after first install)

Those suggestions - I saw say fix 1/3-1/2 of the issues you described.

Thanx redvamp. Will try that.

Edit:

Ok did the above. So far only wmiprvse has started up. Will see what happens and report back.

Thanx redvamp. Will try that.

Edit:

Ok did the above. So far only wmiprvse has started up. Will see what happens and report back.

One of the fixes said probably -- the installer itself never gave the successful termination and therefore keeps running... By stopping the service it won't start again until you install something. That will probably give a successful termination.

The Wmipvse - the suggestion of that restarting was that it would try again to finish successfully.

Other than doing a defragmentation (unless you have an SSD) I have not found much on the rest of the services.

One of the fixes said probably -- the installer itself never gave the successful termination and therefore keeps running... By stopping the service it won't start again until you install something. That will probably give a successful termination.

The Wmipvse - the suggestion of that restarting was that it would try again to finish successfully.

Other than doing a defragmentation (unless you have an SSD) I have not found much on the rest of the services.

I'm not sure when this actually started. But I'm thinking it was when I installed the Win8 app for The WB. So should I maybe try and uninstall that app and see what happens if the problem reoccurs?

I'm not sure when this actually started. But I'm thinking it was when I installed the Win8 app for The WB. So should I maybe try and uninstall that app and see what happens if the problem reoccurs?

Well if the application works-- I would not mess with it-- it is possible and is a common error with bad coded applications.... they don't tell the installer they are done and usually does not get cleared out until the next thing that is installed or a reboot.

Well if the application works-- I would not mess with it-- it is possible and is a common error with bad coded applications.... they don't tell the installer they are done and usually does not get cleared out until the next thing that is installed or a reboot.

Well, the app works for the most part. But when I try and watch a full episode of something, it actually takes over a minute for it to load the show and then stutters like Hell. So I haven't really used it.

Well, the app works for the most part. But when I try and watch a full episode of something, it actually takes over a minute for it to load the show and then stutters like Hell. So I haven't really used it.

I would probably look for some program options-- sometimes they have things like pre-loading or flash storage (if flash) usually through the right click. Either that or disk space usage.. sometimes if flash based you could go for the quality and set that to medium. In some cases that takes the skipping out.

I would probably look for some program options-- sometimes they have things like pre-loading or flash storage (if flash) usually through the right click. Either that or disk space usage.. sometimes if flash based you could go for the quality and set that to medium. In some cases that takes the skipping out.

Yea, they don't have any settings at all.

This topic is now closed to further replies.
  • Posts

    • draw.io Desktop 30.2.6 by Razvan Serea draw.io desktop is a downloadable security-first diagramming application that runs on Windows, MacOS and Linux. Creating diagrams in the desktop app doesn’t need an internet connection. This is useful when you are disconnected or when you must create diagrams in a highly secure environment, where data protection is of the utmost importance. When you use the draw.io desktop app, your diagrams will be stored on your local device. Because this is a stand-alone application, also designed to run offline, there are no interfaces to cloud storage platforms available. Of course, you can still store your diagrams in folders that are synchronised to your cloud storage if you wish. Easy-to-use diagram editor The draw.io apps work just like the office and drawing tools you are used to using. Drag and drop shapes from the shape libraries and drag to draw connectors between them. Drag connectors to add waypoints and set a precise shape and position, or let them reroute automatically. Double click and start typing to add a label to anything. Create tables and swimlane flows with a familiar tool. Style shapes and connectors with customisable palettes, sketch options, fonts and text formatting tools. Search for shapes, including in open-source icon libraries. Use our vast libraries of shapes and templates, organised into logical categories, to create a range of diagrams and infographics. Generate diagrams from text descriptions using our smart templates. Diagram faster with keyboard shortcuts. draw.io Desktop 30.2.6 changelog: Uses electron 42.5.0 #2452 Updates to draw.io core 30.2.6. Download: draw.io 64-bit | Standalone (Open Source) Download: draw.io 32-bit | ARM64 | ARM64 Standalone Links: draw.io Home Page | Project page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      500
    2. 2
      +Edouard
      216
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!