Intel to exit traditional desktop mainboards business after Haswell


Recommended Posts

In what will only be interpreted as more evidence of the dawn of the ?Post PC era,? Intel announced today that it will quit the consumer motherboard business after 20 years and end all production and development of mainboards after its next CPU is introduced. The company said it would wind down operations of its Intel Channel Board Division over the next three years with the final new designs released around the company?s upcoming ?Haswell? CPU.

?We disclosed internally today that Intel?s Desktop Motherboard Business will begin slowly ramping down over the course of the next three years,? Intel spokesman Daniel Snyder told Maximum PC today. ?As Intel gradually ramps down its motherboard business we are ramping up critical areas of the desktop space including integration of innovative solutions for the PC ecosystem such as reference design development, NUC, and other areas to be discussed later.

Intel to Quit Making Motherboards

And well, this is actually fair. I've read some people saying that the Intel boards aren't as good or full-featured as their counterparts from other vendors.

More power to ASUS, Gigabyte, MSI, etc. I guess

Intel is also the higher-priced brand - even compared to ASUS (which isn't exactly cheap).

If you look at Intel motherboards compared to other brands, even where components are not merely similar, but identical, Intel is often NOT the bargain choice. (That is also why I have NEVER - and in ever - bought an Intel-branded motherboard.)

It's not that Intel doesn't make good motherboards; they do. Intel's branded motherboards are still the corporate standard because they are reference-standard-grade - fancy they are NOT.

The problem is that Intel lacks any sort of advantage (except in terms of perception) to the AIBs (even in the Intel-CPU space) - Intel has been an afterthought except when Intel is specified.

It's like prescription drugs - generics cost less; therefore, generics are preferred where possible, not just by insurers, but even by doctors.

Still, this has been touted before (in fact, way back after Intel was forced to shelve the original 820R chipset due to the debacle with RAMBUS) - yet Intel has survived (including their branded-motherboard business).

However, there will doubtless be some reason why the Intel-branded motherboard can soldier on (didn't Intel, in fact, start pushing their branded motherboards through MicroCenter - which they had NOT been doing?).

well, as someone who tried Intel Motherboards,

I can confidently say they are "averages" in performances,

yet a bit more expensive than other vendors motherboards which offer similar performances or better at lesser cost.

even know i still can't quite fathom why its more expensive?

this quiting moves probably causes by Intel's foiled plan (due public pressures),

which said want to abandon socketed CPU and release BGA chips only.

...and an unrelated news: AMD just won another customer.

And the award for not reading the article goes to you. AMD doesn't make motherboards

When it comes to motherboards, I only turned to Intel for dual socket server boards.

To a PC enthusiast, Intel's workstation boards were never appealing because of the company's grudge against over-clockers.

yes

That's a logical conclusion considering they're not making motherboards anymore. :laugh:

It's a shame we can't downvote things on this forum... anyway, the only "bad" thing about this is Intel definitely offered budget motherboards that could be found in bundles on the cheap which were a nice option for a basic home computer. But, I'm sure someone will fill that void pretty quickly.

This won't be a big deal to enthusiasts and PC gamers because the vast majority of them buy non-Intel motherboards. I have seen some good Intel motherboards though. Contrary to what some people might believe, Intel made high-end motherboards (which were oddly overpriced compared to their third-party counterparts).

Contrary to what some people might believe, Intel made high-end motherboards (which were oddly overpriced compared to their third-party counterparts).

I don't know that high end is the right word, in all cases. They made some high end boards, they made a lot of very reliable reference boards, and they seemed to be universally expensive unless you could get a deal on them. It was similar to what ATi did when they were still making cards.

I really don't like the thought of desktop users becoming 'enthusiasts' again. Just seems like prices will go up.

Tablets and touch are great, but nothing beats a Desktop and its power for your main hub of control over everything.

I don't see this as being the dawn of the "post PC era" at all, Intel are simply stopping motherboard manufacture because it was never really an overly large business for them and it's probably reached a time at which it's worth their time to focus on other things.

So Intel will still make the sockets and CPU's, yes ?

of course, just not their own motherboards anymore (which were never the greatest mobos anyway)
This topic is now closed to further replies.
  • Posts

    • Read this in Humor Simpson 's voice, "Out of my way Moe".
    • You still can, its just under the Transform flyout for WordArt now
    • Likely nothing will be done in corporate America, there have been countless Tesla self-driving incidents. Then again, there have also been countless human operated incidents. It's literally daily news here in Canada, to the extent that it's now odd if we get a day where a collision doesn't get announced on the radio throughout the day...
    • SKG Hand Massager with Heat OS500 hands on by Steven Parker I was offered the chance to test out the SKG Hand Massager with Heat OS500, and full disclosure, they let me keep it regardless of my findings. Anyway, I jumped at the chance due to my long hours sitting at my desk, mousing around. Apologies for the knife cut across the top of the box; that was my doing, being a bit too heavy-handed with opening up the outer packaging. First up, what's in the box: SKG Hand Massager with Heat OS500 1x Type-C charging cable User Manual 1-Year Warranty (card) In short, everything you need to get started. According to the official Amazon listing, here are the key features: Full-Hand Air Compression: OS500 wraps your fingers, palm, and wrist with multi-chamber air compression for a complete hand relaxation experience. The extended massage chamber helps cover more of the hand and wrist area than standard palm-only hand massagers Palm Kneading with 6 Modes & 6 Intensities: Built-in palm kneading rollers add a hands-on massage feel, while 6 preset modes and 6 pressure levels let you choose the comfort level that fits your day—from gentle relaxation to a firmer full-hand massage 3 Heat Levels with Cooling Fan: Choose from 104°F, 113°F or 122°F warmth to suit different seasons and comfort preferences. The built-in cooling fan helps reduce stuffiness during heated sessions, keeping your hand feeling fresh and comfortable Easy Visual Display & Smart Timer: The digital image display clearly shows massage area, mode, intensity, heat level, and remaining time at a glance. Select 10, 15, or 20-minute sessions for quick office breaks, evening relaxation, or everyday hand care Rechargeable, Cordless & Comfortable: A 3000mAh battery supports over 90 minutes of full-function use on a full charge, with convenient USB-C charging. The soft inner lining, smooth ABS/PU finish, and premium black-gold design make OS500 ideal for home, office, or gifting With all that out of the way, here are my own findings. I gave it a try on both left and right hands, and as you can maybe see from the above YouTube Short, (sorry for the shaky video), my whole hand fits in, but my wrist barely enters the Hand Massager. I was able to push through a bit more with my fingertips extending out the other end to get a bit of massaging on the start of my wrist. Usage For some reason, there is a strap that is very difficult to fasten to my wrist with one hand. I am not sure what function it has, and it isn't mentioned in the user manual. The only thing I could find was in the product images that claimed "wrist precision". Unlike the Bob and Brad Hand Massager, this device does not massage the wrist anyway, even though a "wrist mode" is mentioned, which must be for smaller hands than I have, as it is mainly intended for the hand and fingers. In addition, for its steeper price, there are no disposable gloves provided in the box, which is a bit of an issue considering the internal cover (which appears to be elasticated nylon) cannot be removed for washing; so you are left with only one choice: always thoroughly wash your hands before using it. I can imagine this thing getting a bit grimy after a period of use, and that is a bit of a shame. With that said, the buttons on the device, from left to right, do the following: Heat button: 3-level heat control at 104°F, 113°F, or 122°F Mode button: Auto mode Circular mode Soothing mode Relax mode Palm and fingers mode Palm and wrist mode Intensity button: from (First-time users) 15Ka, 25Ka, 35Ka, 45Ka, 55Ka, 60Ka (Intensive relief) Knead button: on or off (6 pressure levels) Power button: Long-press to turn on or off Cooling button: turn on or off the cooling fan Also, in the product imagery, it states there are 36 "custom modes," but nowhere is it listed what these modes are. I can only imagine that they mean a combination of all of the above settings in different intensity levels. The device itself seems to rely on a single "kneading" mechanism located at the palm area of the hand, which spins when in use, and the other massage features are mainly utilized through the air sacs, increasing and decreasing at various levels on the hand and fingers. I am not sure it offered too much relief for someone who is typing and operating a mouse for hours at a time; further testing may be required. It does feel nice, though. Finally, you may be wondering how this fits into the scope of a tech website? Well, let me tell you something: sometimes I sit for up to 15 hours working on Neowin, and although I take breaks in between, it takes a toll on my body. I think in the immediate absence of a partner to apply relief, a good massager like this Hand Massager can shed the strains of the day in just a couple of 15-minute bursts. On the official website, this has an MSRP of $99.99, but luckily for our readers, it is selling at $10 off for just $89.99 right now on Amazon. SKG Hand Massager with Heat OS500 for $89.99 (with $10 off coupon), $99.99 MSRP For me, this gets a thumbs hands(?) down. However, it could be improved by making it so that the protective covering could be removed and thrown into the washing machine, or get yourself some disposable gloves to use with it. As an Amazon Associate, we earn from qualifying purchases.
    • Thanks for the info, but I'm still not sure if I need this....
  • Recent Achievements

    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!