HOWTO: Force-update Flash Player for IE10 on Windows 8


Recommended Posts

As everyone may already be aware, Microsoft's Adobe Flash Player updates were just security patches, leaving the ActiveX control still at the factory-shipped version!

So I found this over on the Adobe Forums:

HOWTO: Force-update Flash Player for IE10 on Windows 8

Tired of waiting around for Microsoft to issue a Windows update for Flash Player since... well... forever?

Windows 8 ships with Flash Player version 11.3.378.5 while now we're already at version 11.5.502.146! Adobe won't update this ActiveX control if you're using Windows 8, because apparently Microsoft has to release the update themselves. They promised to release such updates frequently, however, it's been many months and not one update had ever been released as of yet.

Here's how you can bud in, get in there, and update the ActiveX control yourself:

  1. Notice the version you have installed right now by looking at #2 on this page: http://helpx.adobe.c...ash-player.html
  2. Download the new Flash.ocx files (32-bit and 64-bit) here: http://sites.google....1_5_502_146.zip
  3. Copy these instructions into Notepad or similar, because you must close all running instances of Internet Explorer right now.
  4. Go to C:\Windows\System32\Macromed\Flash
  5. Right-click Flash.ocx and go to Properties.
  6. Go to the Security tab, and then click Advanced.
  7. Click Change next to "Owner:"
  8. Type the following into the box that appeared and then click OK: Administrators
  9. Under "Permission entries:" double-click "Administrators", check the box "Full control" and then click OK.
  10. Click OK and then click Yes.
  11. Click OK.
  12. Rename Flash.ocx to Flash-original.ocx
  13. From the ZIP file you downloaded you will see a folder called System32. In there, copy the Flash.ocx file to C:\Windows\System32\Macromed\Flash
  14. That was for the 32-bit version that gets used. Now repeat steps 3 through 12 for the 64-bit version which also gets used, by replacing all occurrences of "System32" above with "SysWOW64". If you do not find a folder on your computer at C:\Windows\SysWOW64\Macromed\Flash then you actually do not need to repeat the steps for the 64-bit version, because your Windows 8 edition is 32-bit

And PRESTO! Revisit #2 on this page and notice the new version number detected: http://helpx.adobe.c...ash-player.html

Granted; there are version number entries to update in the registry but I doubt that this makes any difference. Best to leave those as-is in case an update finally comes along.

ENJOY!

I wonder why MS hasn't updated it yet? I guess they're double and triple checking things for bugs and security holes so maybe. Unless they only update it when they push out a bigger IE update?

I wonder why MS hasn't updated it yet? I guess they're double and triple checking things for bugs and security holes so maybe. Unless they only update it when they push out a bigger IE update?

The issue isn't Microsoft but Adobe - that is where the venting and frustration should be focused.

The issue isn't Microsoft but Adobe - that is where the venting and frustration should be focused.

its always ms's fault :)

I have no issues with ie10 and flash. My lady friends however complain Facebook games sometimes lag.

Revised instructions including 11.6 beta OCX files:

  1. Download your choice of Flash version here: https://sites.google...e/flashactivex/
  2. Copy these instructions into Notepad or similar, because you must close all running instances of Internet Explorer right now.
  3. Press WindowsKey+Pause to bring up your System information. Check which "System type" you have.

32-bit system type:

  1. Go to C:\Windows\System32\Macromed\Flash
  2. Right-click Flash.ocx and go to Properties.
  3. Go to the Security tab, and then click Advanced.
  4. Click Change next to "Owner:"
  5. Type the following into the box that appeared and then click OK: Administrators
  6. Under "Permission entries:" double-click "Administrators", check the box "Full control" and then click OK.
  7. Click OK and then click Yes.
  8. Click OK.
  9. Rename Flash.ocx to Flash-original.ocx
  10. From the ZIP file you downloaded you will see a folder called SysWOW64. In there, copy the Flash.ocx file to C:\Windows\System32\Macromed\Flash. SysWOW64 contains the 32-bit version of Flash.

64-bit system type:

  1. Go to C:\Windows\System32\Macromed\Flash
  2. Right-click Flash.ocx and go to Properties.
  3. Go to the Security tab, and then click Advanced.
  4. Click Change next to "Owner:"
  5. Type the following into the box that appeared and then click OK: Administrators
  6. Under "Permission entries:" double-click "Administrators", check the box "Full control" and then click OK.
  7. Click OK and then click Yes.
  8. Click OK.
  9. Rename Flash.ocx to Flash-original.ocx
  10. From the ZIP file you downloaded you will see a folder called System32. In there, copy the Flash.ocx file to C:\Windows\System32\Macromed\Flash. System32 contains the 64-bit version of Flash.
  11. That was for the 64-bit version that gets used. Now repeat these steps for the 32-bit version which also gets used, by replacing all occurrences of "System32" above with "SysWOW64".

Revisit #2 on this page and notice the new version number detected: http://helpx.adobe.c...ash-player.html

I was looking at the flash page on adobe.com and the newest version for Windows 8 is 11.3.x, while Windows 7 is up to 11.5. That's the official status right now. I bet MS will push out 11.5 at some point but since it's now built into IE10 it'll take some time.

I was looking at the flash page on adobe.com and the newest version for Windows 8 is 11.3.x, while Windows 7 is up to 11.5. That's the official status right now. I bet MS will push out 11.5 at some point but since it's now built into IE10 it'll take some time.

IIRC Adobe has a special build to take into account the changes made in the Metro version. I do hope at some point that eventually either they upgrade or websites move over to html5 quickly.

Is there any pressing reason that they're using a version of Flash on Windows 8 that is 2 cycles out of date?

Look above yoru post - I answered that very question. Please actually read peoples posts and you might learn something.

I don't see why the condescending rudeness was necessary, your post wasn't there when I opened the reply box. And it would be nice if people considered these possibilities before being rude.

I haven't updated my Flash manually at all, but I did notice last week that I got a Flash Player update thru Windows Update (I believe to 11.5). Imagine my surprise when I checked for updates after remembering it was Patch Tuesday and SHAZAM, another Flash update (11.6).

I remember having gotten Flash updates previously, but none ever so quickly and close to another. Hopefully Adobe/Microsoft keep the ball rolling.. maybe an update every Patch Tuesday would be a good schedule.

I haven't updated my Flash manually at all, but I did notice last week that I got a Flash Player update thru Windows Update (I believe to 11.5). Imagine my surprise when I checked for updates after remembering it was Patch Tuesday and SHAZAM, another Flash update (11.6).

I remember having gotten Flash updates previously, but none ever so quickly and close to another. Hopefully Adobe/Microsoft keep the ball rolling.. maybe an update every Patch Tuesday would be a good schedule.

No, the recent one was still 11.3

Todays changed it to 11.6

Why is it that some websites that require Flash player dont work (like miniclip) on modern version of IE10 and others do (like youtube, vimeo etc)?

Yeah the metro version of IE10 uses a white list and allows specific sites to use flash while to blocks the ones not in the list. There is a tool you can get that let's you add sites to the white list if you want or there is a way to do it manually.

  • 6 months later...

Hi I tried to follow the instructions as proposed below: but got stumped at step 6, I was unable to tick the "full control: box" therefore could not  complete the process.

 

My problem is, many site I visit ask to  install the Adobe Flash Player add on, but as it is embedded in Windows 8, and am unable to uninstall/reinstall Flash Player, am I going about solving my problem the right way.

 

32-bit system type:

  • Go to C:\Windows\System32\Macromed\Flash
  • Right-click Flash.ocx and go to Properties.
  • Go to the Security tab, and then click Advanced.
  • Click Change next to "Owner:"
  • Type the following into the box that appeared and then click OK: Administrators
  • Under "Permission entries:" double-click "Administrators", check the box "Full control" and then click OK.
  • Click OK and then click Yes.
  • Click OK.
  • Rename Flash.ocx to Flash-original.ocx
  • From the ZIP file you downloaded you will see a folder called SysWOW64. In there, copy the Flash.ocx file to C:\Windows\System32\Macromed\Flash. SysWOW64 contains the 32-bit version of Flash.
  • 1 year later...

I know this is an old thread, but the way I solved it was to choose a different operating system (Windows 7) on the Adobe flash download page and run the installer.  I'm running Windows 10 Preview with IE 11.  Windows now manages the flash plug-in, but it wasn't keeping up with Adobe, so installing the Windows 7 Active-x version did the trick.

This topic is now closed to further replies.
  • Posts

    • We now know when and how the Universe may truly end by Sayan Sen Image by Marek Pavlík via Pexels| Not representative A study by physicist Henry Tye of Cornell University suggests that the universe may not expand forever. Instead, it could eventually stop expanding, begin contracting and end in a "Big Crunch" roughly 20 billion years from now. The research, published in the Journal of Cosmology and Astroparticle Physics, was conducted by Tye, Horace White Professor of Physics Emeritus at Cornell University. Using recent observations from major dark-energy surveys, Tye and his collaborators developed a cosmological model that predicts the universe could have a total lifespan of about 33 billion years. Since the universe is currently estimated to be 13.8 billion years old, the model places it near the midpoint of its existence. According to Cornell University's summary of the research, the study centers on the cosmological constant, a term introduced by Albert Einstein in his theory of general relativity. In modern cosmology, the cosmological constant is commonly used to describe the simplest form of dark energy, the unknown phenomenon believed to be driving the accelerating expansion of the universe. "For the last 20 years, people believed that the cosmological constant is positive, and the universe will expand forever," Tye said in a Cornell University news release. "The new data seem to indicate that the cosmological constant is negative, and that the universe will end in a big crunch." The study draws on data from the Dark Energy Survey (DES) and the Dark Energy Spectroscopic Instrument (DESI), two major projects designed to investigate the nature of dark energy. According to Tye, recent observations suggest that dark energy may not behave exactly like a simple cosmological constant. To account for those observations, Tye and his collaborators proposed a model involving an extremely light hypothetical particle that evolves over time. In their calculations, this produces a negative cosmological constant and leads to a future collapse of the universe. The model predicts that cosmic expansion would continue for approximately another 11 billion years before reaching a maximum size, after which the universe would begin contracting and eventually collapse. Scientists have long debated how the universe might end. As explained in an article published in The Conversation by Stephen DiKerby of Michigan State University, several possibilities have been proposed. If dark energy remains constant and positive, the universe could continue expanding indefinitely, gradually becoming colder, darker and more diffuse in a scenario often called the "heat death" of the universe. Other theoretical possibilities include a Big Rip, in which cosmic expansion accelerates so dramatically that galaxies, stars and even atoms are torn apart, or a Big Crunch, in which expansion reverses and the universe collapses back into an extremely dense state. DiKerby notes that the Big Crunch idea itself is not new. What distinguishes Tye's work is that it attempts to use current observational data to estimate when such a collapse might occur and how it could unfold. Much of the universe's long-term evolution remains uncertain. According to current astrophysical understanding, stars will continue to form and die for billions of years. The Sun, for example, is about halfway through its expected lifespan. Galaxies are also expected to continue merging; the Milky Way and Andromeda galaxies are projected to collide several billion years from now. At the same time, the nature of dark energy remains one of the biggest unanswered questions in cosmology. While observations indicate that the universe's expansion is accelerating, scientists still do not know what is causing that acceleration. Future observations may therefore alter current predictions about the cosmos's ultimate fate. Tye emphasized that additional evidence will be needed before firm conclusions can be drawn. DESI continues to collect data, while upcoming observations from missions and observatories including Euclid, SPHEREx and the Vera C. Rubin Observatory are expected to provide more precise measurements of dark energy. "People have said before that if the cosmological constant is negative, then the universe will collapse eventually. That's not new," Tye said. "However, here the model tells you when the universe collapses and how it collapses." For now, the study presents one possible future for the cosmos rather than a settled prediction. Whether the universe ultimately ends in a Big Crunch, expands forever, or follows another path entirely remains an open question that future observations will help answer. Source: Cornell University, The Conversation This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • If you look around on Amazon, some of these are available for $9
    • I’m still using an Xbox One S, so time for an upgrade to play this but as much as I hate Sony, I think I’ll get the ps5 pro
    • I bought this game. Played it for an hour, and then got a refund from Steam. Not a fun game at all.
    • Nothing Ear buds with active noise cancellation are at their lowest price ever with 51% off by Fiza Ali Amazon is currently offering the Nothing Ear wireless earbuds at their lowest price ever with 51% off limited prime deal. The earbuds feature an 11mm dynamic drivers with a ceramic diaphragm, and support high-resolution audio codecs including AAC, SBC, LDAC, and LHDC 5.0. They support active noise cancellation of up to 45dB across a frequency range of up to 5000Hz, and include a smart ANC algorithm, adaptive noise cancellation, and a transparency mode that allows surrounding sounds to be heard when needed. Connectivity is provided via Bluetooth 5.3, with support for multiple profiles including HFP, A2DP, AVRCP, and others. The earbuds also support dual connection, allowing them to be paired with two devices at the same time. Additional features include IP54 water and dust resistance for the earbuds and IP55 for the charging case, in-ear detection, pinch controls, low-latency mode, Google Fast Pair, Microsoft Swift Pair, and a three-microphone system per earbud for clearer voice calls. The Nothing X app, available on Android and iOS, provides access to custom EQ settings, bass enhancement, personal sound profiles, ear tip fit testing, firmware updates, customisable controls, dual-device management, and a find-my-earbuds feature. In terms of battery performance, each earbud has a 46mAh battery and the charging case has a 500mAh capacity. With active noise cancellation (ANC) turned off, the earbuds should offer up to 8.5 hours of playback on a single charge and up to 40.5 hours in total with the charging case. With ANC enabled, playback should last up to 5.2 hours on the earbuds and up to 24 hours with the case. For calls, talk time should reach up to 5 hours on the earbuds and 23 hours with the case when ANC is off, while ANC on should provide up to 4 hours on the earbuds and 18 hours with the case. Finally, fast charging should deliver up to 10 hours of playback from 10 minutes of charging when ANC is disabled. Nothing Ear Wireless Earbuds Bluetooth: $73.15 (Amazon US) - 51% off Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      572
    2. 2
      +Edouard
      173
    3. 3
      PsYcHoKiLLa
      73
    4. 4
      Michael Scrip
      68
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!