[Tutorial]Windows 8 to Go without Enterprise Edition


Recommended Posts

Windows_To_Go_USB_Drive.png

Windows to Go

Hey guys this is a tutorial on how to set up a Windows to Go (a live Windows 8 boot) USB using any version of Windows provided you have a copy of Windows 8.

Things you will need:

  • A USB or external HDD with 16GB of space (It is actually possible to do it onto an 8GB drive but depending on its actual formatted capacity you may have to remove a few drivers etc.)
  • A copy of a Windows 8 disc or ISO (Any version is fine including upgrade ones) you can grab a free 90 trial here
  • Less that 30 minutes of time depending on your hardware

Instructions:

  1. Locate your Windows 8 disc or ISO and mount it
  2. Navigate to \sources and copy the install.wim file to your desktop or other convenient location
  3. Insert your USB or HDD and format the partition as NTFS with the default allocation
  4. Download the free GImageX (http://www.softpedia...s/GImageX.shtml) and extract it
  5. Run the x86 or x64 version depending on the version of Windows you are using
  6. Navigate to the "Apply" tab
  7. In the source section enter or browse for the location of the install.wim we copied earlier
  8. In the destination section enter or browse for the location of the device you want to use for Windows to Go
  9. Leave the checkboxes unchecked and hit apply
  10. After imaging process is complete navigate to Disk Management (type in partition at search and you will find it)
  11. Find the partition you are using for Windows to Go and right click it then -> "Mark partition as active" - this will allow us to boot from this partition, if its already active then don't worry about this step
  12. Navigate to your Windows to Go disk and go to \Windows\System32
  13. Open up CMD from this location (or change directory to the above folder) and enter
    bcdboot.exe X:\Windows /s X: /f ALL[/CODE]

    where "X" is your Windows To Go drive letter

  14. Congratulations! Your Windows to Go device is now ready and all you will have to do is boot from the USB at startup then run through the one time configuration settings!

[b]Tips:[/b]

  • Double check the drive letter when flashing the device because if you have other partitions then you will screw them up
  • Use a USB device with a high read/write rate because it will enhance disk IO performance on the machine you are running it on. USB 3.0 and or an SSD will greatly increase performance!
  • Copy a few installers to a folder on the USB for easy setup when you're up and running
  • Try not to unplug your Windows to Go device whilst the computer is still running because it may cause data corruption but if you do you will have 1 minute before it shuts down
  • You can use this method to quickly flash SSDs, HDDs, USBs and SDs with a custom image of Windows 8!

If you have any problem feel free to comment below and PM me!

post-449715-0-57758000-1359778374.png

Btw does this allow installing Store apps? On Windows 8 Enterprise, there is a policy "Allow Store to install apps on Windows To Go workspaces" which enables the Store inside the Windows To Go workspace. If that policy is enabled, will it work with this method?

  On 02/02/2013 at 09:44, UXGaurav said:

Btw does this allow installing Store apps? On Windows 8 Enterprise, there is a policy "Allow Store to install apps on Windows To Go workspaces" which enables the Store inside the Windows To Go workspace. If that policy is enabled, will it work with this method?

It sure does! On your Windows to Go device just follow the instructions here (just instruction on enabling that group policy) to enable the store apps and they work perfectly (that policy is on Windows 8/Pro/RT/ and Server 2012)! You could bake that setting into your image if you were making a lot of portable workspaces but I've just done mine manually and it's no trouble at all.

  • 2 weeks later...
  • 3 weeks later...
  On 11/02/2013 at 00:00, Gnieus said:

This is rather cool! Cheers for the tutorial.

No worries man! It is rather cool if I dare say so myself! I often use it to flash HDDs over a USB 3 to SATA III cable! Get your OS up and running in no time!

I know Microsoft has provided a list for certified USB flash drives that will guarantee Windows To Go ? but, is it possible or recommended to use any other USB besides the ones that are officially certified? Sure, it has to be USB 3.0 (preferable) and above 16GB.

Has anyone found any issues with using uncertified USBs?

  On 04/03/2013 at 19:37, astroXP said:

I know Microsoft has provided a list for certified USB flash drives that will guarantee Windows To Go ? but, is it possible or recommended to use any other USB besides the ones that are officially certified? Sure, it has to be USB 3.0 (preferable) and above 16GB.

Has anyone found any issues with using uncertified USBs?

Nope! The certified USBs basically just ensure data read/write consistency as well as capacity. Every USB I have (and believe me I have a LOAD) works fine but of course the USB3s and higher class SDs work a lot better. You can pretty much guarantee my technique to work on all USBs with any edition of Windows 8/Server 2012 :) What I will say however is that some USB's don't play nice at booting off them but they are usually generics which don't follow standard USB protocol!

  On 06/03/2013 at 10:36, ingramator said:

Nope! The certified USBs basically just ensure data read/write consistency as well as capacity. Every USB I have (and believe me I have a LOAD) works fine but of course the USB3s and higher class SDs work a lot better. You can pretty much guarantee my technique to work on all USBs with any edition of Windows 8/Server 2012 :) What I will say however is that some USB's don't play nice at booting off them but they are usually generics which don't follow standard USB protocol!

Sweet! Thanks :D

  On 06/03/2013 at 10:49, THE_OBSERVER said:

Wow this is great, can i ask why people would want server 2012 running on this?

portable server install for security and rapid deployment.

  On 09/03/2013 at 00:57, remixedcat said:

portable server install for security and rapid deployment.

That makes no sense what so ever. A server is typically a static entity on a network, you just threw out a bunch of generic terms with no real explanation or real world usage scenario.

  On 09/03/2013 at 01:07, remixedcat said:

Boot from USB>have instant server that's pre-configured. No need to install. How hard is that to understand?

Because if you want to do it right you should take the time and create an image of a pre-configured server.... You're just asking for trouble for doing W2G on a Server

What's so bad about having a portable server install? Nothing. Everyone has different specifications for thier uses. No need to bash anyone elses's specifications.

  • 2 weeks later...

Less then 30 minutes depending on your hardware, really? So, why does GImageX say it's going to take nearly 248 minutes

to complete? This is on a Core i3 based laptop with 4GB RAM installed. Less than 30 minutes is a nonsense, unless you do

this on a very high spec system with at least 10 quad core CPU's and over 32GB of enterprise grade RAM installed!

GImageX--247-mins-to-go--WTF.png

  On 17/03/2013 at 20:45, DJGM said:

Less then 30 minutes depending on your hardware, really? So, why does GImageX say it's going to take nearly 248 minutes

to complete? This is on a Core i3 based laptop with 4GB RAM installed. Less than 30 minutes is a nonsense, unless you do

this on a very high spec system with at least 10 quad core CPU's and over 32GB of enterprise grade RAM installed!

GImageX--247-mins-to-go--WTF.png

You're putting temporary files on the installation target. Maybe that's why?

EDIT: The tutorial doesn't mention setting the temp location, I guess.

Either you've got a slow USB host device or USB port (1.0 or 1.1).

As said you should NOT be using the USB drive as the image creation medium, it'll constantly being doing small writes which WILL degrade the USB much quicker.

  • 1 month later...

Excellent tutorial!

One question though, and this might seem na?ve, but how does activation function here? Typically speaking, if I was to take a hard drive out of one PC and put it in another one it probably would work, but windows would notice the different hardware and prompt for re-activation (Same as modern versions of office). I am curious how this would work as I have read the article thoroughly and can't seem to find any reference to circumvent this.

Thanks in advance, and sorry if I missed something.

  On 01/05/2013 at 18:37, Smiler Martin Hudgeon said:

Excellent tutorial!

One question though, and this might seem na?ve, but how does activation function here? Typically speaking, if I was to take a hard drive out of one PC and put it in another one it probably would work, but windows would notice the different hardware and prompt for re-activation (Same as modern versions of office). I am curious how this would work as I have read the article thoroughly and can't seem to find any reference to circumvent this.

Thanks in advance, and sorry if I missed something.

I believe you'd have to have a separate license for it that way. Windows To Go is an enterprise Windows feature and the license for it should be included in your volume license agreement.

This topic is now closed to further replies.
  • Posts

    • Ubuntu gets second-ever snapshot release for Questing Quokka by Paul Hill Canonical has announced the release of Ubuntu 25.10 Questing Quokka Snapshot 2, a monthly development build that gives testers and developers a base from which to work on software for the upcoming release. Snapshot 1 was released at the end of May and Snapshot 3 is scheduled for July 31. Notably, the release date of Snapshot 2 and 3 have moved since last month. The Snapshot 2 update is available for various Ubuntu spins, such as Kubuntu and Lubuntu. To download, head to Ubuntu CD Image and go to the link for the version you want, such as ubuntu/. Once you’ve picked, go to releases/ > 25.10/ > snapshot-2/ and download the appropriate image for your computer - most people will want ‘64-bit PC (AMD64) desktop image’. The announcement mentions that these snapshot builds are not production ready, so you should not be installing them on a machine you use to do your work and daily computing. Canonical said that these builds should be seen as “throwaway artifacts”, whatever that means. If you’re an Ubuntu developer, you should submit your changes in the Ubuntu archive by July 28 to see it in the third snapshot. If you make any changes, Canonical asks you to update the Release Notes with the updates that you have worked on, so everyone knows what changed. Speaking of release notes, Canonical has been updating them incrementally. So far, we know that GNOME 48 is being used alongside the Linux 6.14 kernel. The use of GNOME 48 means that Ubuntu 25.10 only supports Wayland sessions as X.org has finally been dropped. Wayland has been used for a while on Ubuntu, so most people shouldn't have any issues as a result of the switchover. If you want to try out Ubuntu 25.10 Snapshot 2, you can find the download links over on the Ubuntu website. Just remember, these are not intended to be used on production machines!
    • Garmin Dash Cam X310: 4K dash cam on sale at lowest price for $334.99 by Paul Hill Dash cam footage can be vital for drivers who get into accidents as it can be used to help with insurance claims if you’re involved in an accident, outside of that, it can be used for filming your trips or recording freak events such as asteroids burning up in the atmosphere. If you’re still without one, or looking to upgrade, take a moment to read about the Garmin Dash Cam X310 which has been reduced by 16% from $399.99 to $334.99. To briefly touch on the features before we get started, the X310 is a compact 4K Ultra HD touchscreen dash cam with a 140-degree field of view, ensuring it captures everything. There’s also a built-in Clarity Polarizer to reduce glare from the windshield and it features automatic recording. The main attraction of the Garmin Dash Cam X310 is undoubtedly the 4K Ultra HD video which will capture fine details, and the 140-degree field of view that ensures it doesn’t miss anything important. Coupled with this, the Clarity Polarizer helps to reduce glare from the windshield so that your video footage is better. It also includes HDR which improves the night vision. Aside from having a touchscreen, the X310 comes with voice control allowing you to save video and audio hands-free, meaning you can focus on driving. It supports multiple languages - English, German, French, Spanish, Italian, and Swedish. Other features include built-in GPS for recording the location, date, and time of incidents; parking guard and live view for security while parked (required a paid Vault subscription); and its compact design which allows it to sit “virtually unnoticed” on the windshield. Please note that the product description says some jurisdictions may restrict the use of dashcams, so check your local laws before buying. If you are looking for a high-resolution dash cam with voice control and advanced parking surveillance (paid subscription), the X310 could be for you. The main downside of this product is that it’s still at a premium price point, despite it being at its lowest price on Amazon. If you don’t mind this, it could definitely be a great choice for you. Garmin Dash Cam X310: $334.99 (Amazon US) / MSRP $399.99 This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • I have a Motorola B12, and it's been working pretty solidly for a year now. 
  • Recent Achievements

    • Week One Done
      Marites earned a badge
      Week One Done
    • One Year In
      runge100 earned a badge
      One Year In
    • One Month Later
      runge100 earned a badge
      One Month Later
    • One Month Later
      jfam earned a badge
      One Month Later
    • First Post
      TheRingmaster earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      563
    2. 2
      +FloatingFatMan
      177
    3. 3
      ATLien_0
      169
    4. 4
      Michael Scrip
      125
    5. 5
      Xenon
      118
  • Tell a friend

    Love Neowin? Tell a friend!