[Tutorial]Windows 8 to Go without Enterprise Edition


Recommended Posts

Windows_To_Go_USB_Drive.png

Windows to Go

Hey guys this is a tutorial on how to set up a Windows to Go (a live Windows 8 boot) USB using any version of Windows provided you have a copy of Windows 8.

Things you will need:

  • A USB or external HDD with 16GB of space (It is actually possible to do it onto an 8GB drive but depending on its actual formatted capacity you may have to remove a few drivers etc.)
  • A copy of a Windows 8 disc or ISO (Any version is fine including upgrade ones) you can grab a free 90 trial here
  • Less that 30 minutes of time depending on your hardware

Instructions:

  1. Locate your Windows 8 disc or ISO and mount it
  2. Navigate to \sources and copy the install.wim file to your desktop or other convenient location
  3. Insert your USB or HDD and format the partition as NTFS with the default allocation
  4. Download the free GImageX (http://www.softpedia...s/GImageX.shtml) and extract it
  5. Run the x86 or x64 version depending on the version of Windows you are using
  6. Navigate to the "Apply" tab
  7. In the source section enter or browse for the location of the install.wim we copied earlier
  8. In the destination section enter or browse for the location of the device you want to use for Windows to Go
  9. Leave the checkboxes unchecked and hit apply
  10. After imaging process is complete navigate to Disk Management (type in partition at search and you will find it)
  11. Find the partition you are using for Windows to Go and right click it then -> "Mark partition as active" - this will allow us to boot from this partition, if its already active then don't worry about this step
  12. Navigate to your Windows to Go disk and go to \Windows\System32
  13. Open up CMD from this location (or change directory to the above folder) and enter
    bcdboot.exe X:\Windows /s X: /f ALL[/CODE]

    where "X" is your Windows To Go drive letter

  14. Congratulations! Your Windows to Go device is now ready and all you will have to do is boot from the USB at startup then run through the one time configuration settings!

[b]Tips:[/b]

  • Double check the drive letter when flashing the device because if you have other partitions then you will screw them up
  • Use a USB device with a high read/write rate because it will enhance disk IO performance on the machine you are running it on. USB 3.0 and or an SSD will greatly increase performance!
  • Copy a few installers to a folder on the USB for easy setup when you're up and running
  • Try not to unplug your Windows to Go device whilst the computer is still running because it may cause data corruption but if you do you will have 1 minute before it shuts down
  • You can use this method to quickly flash SSDs, HDDs, USBs and SDs with a custom image of Windows 8!

If you have any problem feel free to comment below and PM me!

post-449715-0-57758000-1359778374.png

Btw does this allow installing Store apps? On Windows 8 Enterprise, there is a policy "Allow Store to install apps on Windows To Go workspaces" which enables the Store inside the Windows To Go workspace. If that policy is enabled, will it work with this method?

  On 02/02/2013 at 09:44, UXGaurav said:

Btw does this allow installing Store apps? On Windows 8 Enterprise, there is a policy "Allow Store to install apps on Windows To Go workspaces" which enables the Store inside the Windows To Go workspace. If that policy is enabled, will it work with this method?

It sure does! On your Windows to Go device just follow the instructions here (just instruction on enabling that group policy) to enable the store apps and they work perfectly (that policy is on Windows 8/Pro/RT/ and Server 2012)! You could bake that setting into your image if you were making a lot of portable workspaces but I've just done mine manually and it's no trouble at all.

  • 2 weeks later...
  • 3 weeks later...
  On 11/02/2013 at 00:00, Gnieus said:

This is rather cool! Cheers for the tutorial.

No worries man! It is rather cool if I dare say so myself! I often use it to flash HDDs over a USB 3 to SATA III cable! Get your OS up and running in no time!

I know Microsoft has provided a list for certified USB flash drives that will guarantee Windows To Go ? but, is it possible or recommended to use any other USB besides the ones that are officially certified? Sure, it has to be USB 3.0 (preferable) and above 16GB.

Has anyone found any issues with using uncertified USBs?

  On 04/03/2013 at 19:37, astroXP said:

I know Microsoft has provided a list for certified USB flash drives that will guarantee Windows To Go ? but, is it possible or recommended to use any other USB besides the ones that are officially certified? Sure, it has to be USB 3.0 (preferable) and above 16GB.

Has anyone found any issues with using uncertified USBs?

Nope! The certified USBs basically just ensure data read/write consistency as well as capacity. Every USB I have (and believe me I have a LOAD) works fine but of course the USB3s and higher class SDs work a lot better. You can pretty much guarantee my technique to work on all USBs with any edition of Windows 8/Server 2012 :) What I will say however is that some USB's don't play nice at booting off them but they are usually generics which don't follow standard USB protocol!

  On 06/03/2013 at 10:36, ingramator said:

Nope! The certified USBs basically just ensure data read/write consistency as well as capacity. Every USB I have (and believe me I have a LOAD) works fine but of course the USB3s and higher class SDs work a lot better. You can pretty much guarantee my technique to work on all USBs with any edition of Windows 8/Server 2012 :) What I will say however is that some USB's don't play nice at booting off them but they are usually generics which don't follow standard USB protocol!

Sweet! Thanks :D

  On 06/03/2013 at 10:49, THE_OBSERVER said:

Wow this is great, can i ask why people would want server 2012 running on this?

portable server install for security and rapid deployment.

  On 09/03/2013 at 00:57, remixedcat said:

portable server install for security and rapid deployment.

That makes no sense what so ever. A server is typically a static entity on a network, you just threw out a bunch of generic terms with no real explanation or real world usage scenario.

  On 09/03/2013 at 01:07, remixedcat said:

Boot from USB>have instant server that's pre-configured. No need to install. How hard is that to understand?

Because if you want to do it right you should take the time and create an image of a pre-configured server.... You're just asking for trouble for doing W2G on a Server

What's so bad about having a portable server install? Nothing. Everyone has different specifications for thier uses. No need to bash anyone elses's specifications.

  • 2 weeks later...

Less then 30 minutes depending on your hardware, really? So, why does GImageX say it's going to take nearly 248 minutes

to complete? This is on a Core i3 based laptop with 4GB RAM installed. Less than 30 minutes is a nonsense, unless you do

this on a very high spec system with at least 10 quad core CPU's and over 32GB of enterprise grade RAM installed!

GImageX--247-mins-to-go--WTF.png

  On 17/03/2013 at 20:45, DJGM said:

Less then 30 minutes depending on your hardware, really? So, why does GImageX say it's going to take nearly 248 minutes

to complete? This is on a Core i3 based laptop with 4GB RAM installed. Less than 30 minutes is a nonsense, unless you do

this on a very high spec system with at least 10 quad core CPU's and over 32GB of enterprise grade RAM installed!

GImageX--247-mins-to-go--WTF.png

You're putting temporary files on the installation target. Maybe that's why?

EDIT: The tutorial doesn't mention setting the temp location, I guess.

Either you've got a slow USB host device or USB port (1.0 or 1.1).

As said you should NOT be using the USB drive as the image creation medium, it'll constantly being doing small writes which WILL degrade the USB much quicker.

  • 1 month later...

Excellent tutorial!

One question though, and this might seem na?ve, but how does activation function here? Typically speaking, if I was to take a hard drive out of one PC and put it in another one it probably would work, but windows would notice the different hardware and prompt for re-activation (Same as modern versions of office). I am curious how this would work as I have read the article thoroughly and can't seem to find any reference to circumvent this.

Thanks in advance, and sorry if I missed something.

  On 01/05/2013 at 18:37, Smiler Martin Hudgeon said:

Excellent tutorial!

One question though, and this might seem na?ve, but how does activation function here? Typically speaking, if I was to take a hard drive out of one PC and put it in another one it probably would work, but windows would notice the different hardware and prompt for re-activation (Same as modern versions of office). I am curious how this would work as I have read the article thoroughly and can't seem to find any reference to circumvent this.

Thanks in advance, and sorry if I missed something.

I believe you'd have to have a separate license for it that way. Windows To Go is an enterprise Windows feature and the license for it should be included in your volume license agreement.

This topic is now closed to further replies.
  • Posts

    • Win11 being 2.3x faster than Win10, so that means without changing any hardware, Doom Eternal will run at over 2x the framerate? Or that any computational stuff will be done 2x faster just because of OS? Press X for doubt. I wonder where they pulled these metrics out of coz they make no sense. Not to mention my laptop with Ryzen 2500U that used to run Windows 11 simply CAN'T anymore because of BS arbitrary requirements Microsoft has imposed in Win11 that weren't there intiially. So, that laptop is now running Ubuntu or Fedora and runs at 1000000000000000000000x faster speeds because Windows 11 just doesn't work at all so it gets DNF.
    • “Ask Photos” is coming to more Google Photos users in the US by Paul Hill Google has announced several improvements to a Gemini-powered Google Photos feature called Ask Photos. The feature launched last year in early access and it was great for longer search requests, however, when users typed “Dog” or “Beach” looking for those types of pictures, Ask Photos underperformed. Now, Google has addressed this and is bringing the feature to more eligible users in the United States. The search giant said that users enjoyed asking queries such as “suggest photos that’d make great phone backgrounds” or “what did I eat on my trip to Barcelona?” and getting Gemini-powered responses to these complex questions. Unfortunately, simple searches like “beach” or “dogs” were generating less than optimal results and people complained. To remedy the situation, Google has brought the best of Google Photos’ classic search feature to Ask Photos to improve latency. Easy, short requests will be dealt with by the old search mechanism and when you ask complex queries, it will switch over to the Gemini-powered search results. Now that Google has addressed this main issue of simple searches by integrated functionality from the previous search model, the company feels more confident to open up beyond early access and deliver it to more users in the United States. To be eligible, you must be 18+, be in the US, have your Google Account language set to English (United States), and have Face Groups turned on. This feature is only available on Android and iOS. To start using it, open Google Photos and tap on Ask at the bottom, then press Try now and agree to the terms. If you do not see the Ask button, it means you’re not yet eligible. The feature also can’t be used on computers yet. Hopefully, Google will quickly expand this feature outside the US so that international users can try it out too.
    • When are MS going to learn. Traditional home users who email, watch cat videos and perform basic tasks don't care if W11 is slightly faster...assuming it's true. Few home users care about faster speed and more secure claims. In any event, it's irrelevant. MS stopped caring about home users years ago as evident by their hostile, anti choice home user policies.
    • They have. https://www.xda-developers.com...-25h2-update-kind-of-small/
    • Microsoft shares detailed performance benchmarks for Windows 11 vs 10 to show the faster PC by Sayan Sen In the past, Microsoft has always made big claims regarding Windows 11 performance and how it is faster and better than Windows 10. For example, back in 2021, the company stated how the former was designed to get the best out of your system hardware. Later in 2023, Microsoft shared detailed Windows 11 performance improvements and upgrades it achieved on the new OS. While the claims were not substantiated with data, they were certainly quite interesting. Then, in 2024, Microsoft highlighted the differences in performance, citing a paid study, to show Windows 11 was way faster. As with most commissioned studies, the data was not represented fairly. This week, Microsoft has shared new numbers based on its December 2024 testing in a new support document. Here are the performance claims Microsoft made: Top Windows 11 PCs have up to 2.7 more hours of battery life than Windows 10 PCs Windows 11 PCs are up to 2.3x faster than Windows 10 PCs Windows 11 PCs offer up to 3.2x faster web browsing than Windows 10 PCs Windows 11 PCs offer up to 2x faster Microsoft Office productivity than Windows 10 PCs Thus, if you ask Microsoft, it will say that Windows 11 is better than Windows 10 in everything there is, be it web browsing, Office use, battery life, and overall performance in general. The company notes that the results are "based on a 95% confidence interval" for each OS across multiple tests. Microsoft also accounted for outliers. To reach such numbers, Microsoft used the following test metrics: For battery life, a local 1080p 24 fps MP4 video file playback was tested till 90% battery discharge on the Windows Media Player app. During the test, all settings were default except that screen brightness was set to 150 nits and Auto-brightness was disabled. Wi-Fi was connected to a network. For the "2.3x faster" claim, Geekbench 6 results have been cited. For web browsing, Speedometer was used, though Microsoft does not mention the version. And finally, for Office, Procyon Office productivity was used. Interestingly, Microsoft only used Intel CPUs (the company also recently recommended Intel chips for Windows 11 Pro PCs). The company has played it a smarter this time as it has "tested performance, battery life and application capabilities of a selection of Windows 11 PCs in comparison to a selection of Windows 10 PCs", where the Windows 10 PCs feature Intel Core 6th, 8th, and 10th gen chips and Windows 11 PCs pack Intel Core 12th and 13th gen. Thus, this is Microsoft essentially acknowledging that the underlying hardware itself actually plays a big role in the claims it has made. But to be fair to the company, there is also no way to run Windows 11, at least officially, on unsupported PCs, such that a direct comparison can be made. You can find the support document with full battery results in this article here on Microsoft's website.
  • Recent Achievements

    • Week One Done
      Marites earned a badge
      Week One Done
    • One Year In
      runge100 earned a badge
      One Year In
    • One Month Later
      runge100 earned a badge
      One Month Later
    • One Month Later
      jfam earned a badge
      One Month Later
    • First Post
      TheRingmaster earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      567
    2. 2
      +FloatingFatMan
      177
    3. 3
      ATLien_0
      169
    4. 4
      Michael Scrip
      127
    5. 5
      Xenon
      119
  • Tell a friend

    Love Neowin? Tell a friend!