[Tutorial]Windows 8 to Go without Enterprise Edition


Recommended Posts

Windows_To_Go_USB_Drive.png

Windows to Go

Hey guys this is a tutorial on how to set up a Windows to Go (a live Windows 8 boot) USB using any version of Windows provided you have a copy of Windows 8.

Things you will need:

  • A USB or external HDD with 16GB of space (It is actually possible to do it onto an 8GB drive but depending on its actual formatted capacity you may have to remove a few drivers etc.)
  • A copy of a Windows 8 disc or ISO (Any version is fine including upgrade ones) you can grab a free 90 trial here
  • Less that 30 minutes of time depending on your hardware

Instructions:

  1. Locate your Windows 8 disc or ISO and mount it
  2. Navigate to \sources and copy the install.wim file to your desktop or other convenient location
  3. Insert your USB or HDD and format the partition as NTFS with the default allocation
  4. Download the free GImageX (http://www.softpedia...s/GImageX.shtml) and extract it
  5. Run the x86 or x64 version depending on the version of Windows you are using
  6. Navigate to the "Apply" tab
  7. In the source section enter or browse for the location of the install.wim we copied earlier
  8. In the destination section enter or browse for the location of the device you want to use for Windows to Go
  9. Leave the checkboxes unchecked and hit apply
  10. After imaging process is complete navigate to Disk Management (type in partition at search and you will find it)
  11. Find the partition you are using for Windows to Go and right click it then -> "Mark partition as active" - this will allow us to boot from this partition, if its already active then don't worry about this step
  12. Navigate to your Windows to Go disk and go to \Windows\System32
  13. Open up CMD from this location (or change directory to the above folder) and enter
    bcdboot.exe X:\Windows /s X: /f ALL[/CODE]

    where "X" is your Windows To Go drive letter

  14. Congratulations! Your Windows to Go device is now ready and all you will have to do is boot from the USB at startup then run through the one time configuration settings!

[b]Tips:[/b]

  • Double check the drive letter when flashing the device because if you have other partitions then you will screw them up
  • Use a USB device with a high read/write rate because it will enhance disk IO performance on the machine you are running it on. USB 3.0 and or an SSD will greatly increase performance!
  • Copy a few installers to a folder on the USB for easy setup when you're up and running
  • Try not to unplug your Windows to Go device whilst the computer is still running because it may cause data corruption but if you do you will have 1 minute before it shuts down
  • You can use this method to quickly flash SSDs, HDDs, USBs and SDs with a custom image of Windows 8!

If you have any problem feel free to comment below and PM me!

post-449715-0-57758000-1359778374.png

Btw does this allow installing Store apps? On Windows 8 Enterprise, there is a policy "Allow Store to install apps on Windows To Go workspaces" which enables the Store inside the Windows To Go workspace. If that policy is enabled, will it work with this method?

  On 02/02/2013 at 09:44, UXGaurav said:

Btw does this allow installing Store apps? On Windows 8 Enterprise, there is a policy "Allow Store to install apps on Windows To Go workspaces" which enables the Store inside the Windows To Go workspace. If that policy is enabled, will it work with this method?

It sure does! On your Windows to Go device just follow the instructions here (just instruction on enabling that group policy) to enable the store apps and they work perfectly (that policy is on Windows 8/Pro/RT/ and Server 2012)! You could bake that setting into your image if you were making a lot of portable workspaces but I've just done mine manually and it's no trouble at all.

  • 2 weeks later...
  • 3 weeks later...
  On 11/02/2013 at 00:00, Gnieus said:

This is rather cool! Cheers for the tutorial.

No worries man! It is rather cool if I dare say so myself! I often use it to flash HDDs over a USB 3 to SATA III cable! Get your OS up and running in no time!

I know Microsoft has provided a list for certified USB flash drives that will guarantee Windows To Go ? but, is it possible or recommended to use any other USB besides the ones that are officially certified? Sure, it has to be USB 3.0 (preferable) and above 16GB.

Has anyone found any issues with using uncertified USBs?

  On 04/03/2013 at 19:37, astroXP said:

I know Microsoft has provided a list for certified USB flash drives that will guarantee Windows To Go ? but, is it possible or recommended to use any other USB besides the ones that are officially certified? Sure, it has to be USB 3.0 (preferable) and above 16GB.

Has anyone found any issues with using uncertified USBs?

Nope! The certified USBs basically just ensure data read/write consistency as well as capacity. Every USB I have (and believe me I have a LOAD) works fine but of course the USB3s and higher class SDs work a lot better. You can pretty much guarantee my technique to work on all USBs with any edition of Windows 8/Server 2012 :) What I will say however is that some USB's don't play nice at booting off them but they are usually generics which don't follow standard USB protocol!

  On 06/03/2013 at 10:36, ingramator said:

Nope! The certified USBs basically just ensure data read/write consistency as well as capacity. Every USB I have (and believe me I have a LOAD) works fine but of course the USB3s and higher class SDs work a lot better. You can pretty much guarantee my technique to work on all USBs with any edition of Windows 8/Server 2012 :) What I will say however is that some USB's don't play nice at booting off them but they are usually generics which don't follow standard USB protocol!

Sweet! Thanks :D

  On 06/03/2013 at 10:49, THE_OBSERVER said:

Wow this is great, can i ask why people would want server 2012 running on this?

portable server install for security and rapid deployment.

  On 09/03/2013 at 00:57, remixedcat said:

portable server install for security and rapid deployment.

That makes no sense what so ever. A server is typically a static entity on a network, you just threw out a bunch of generic terms with no real explanation or real world usage scenario.

  On 09/03/2013 at 01:07, remixedcat said:

Boot from USB>have instant server that's pre-configured. No need to install. How hard is that to understand?

Because if you want to do it right you should take the time and create an image of a pre-configured server.... You're just asking for trouble for doing W2G on a Server

What's so bad about having a portable server install? Nothing. Everyone has different specifications for thier uses. No need to bash anyone elses's specifications.

  • 2 weeks later...

Less then 30 minutes depending on your hardware, really? So, why does GImageX say it's going to take nearly 248 minutes

to complete? This is on a Core i3 based laptop with 4GB RAM installed. Less than 30 minutes is a nonsense, unless you do

this on a very high spec system with at least 10 quad core CPU's and over 32GB of enterprise grade RAM installed!

GImageX--247-mins-to-go--WTF.png

  On 17/03/2013 at 20:45, DJGM said:

Less then 30 minutes depending on your hardware, really? So, why does GImageX say it's going to take nearly 248 minutes

to complete? This is on a Core i3 based laptop with 4GB RAM installed. Less than 30 minutes is a nonsense, unless you do

this on a very high spec system with at least 10 quad core CPU's and over 32GB of enterprise grade RAM installed!

GImageX--247-mins-to-go--WTF.png

You're putting temporary files on the installation target. Maybe that's why?

EDIT: The tutorial doesn't mention setting the temp location, I guess.

Either you've got a slow USB host device or USB port (1.0 or 1.1).

As said you should NOT be using the USB drive as the image creation medium, it'll constantly being doing small writes which WILL degrade the USB much quicker.

  • 1 month later...

Excellent tutorial!

One question though, and this might seem na?ve, but how does activation function here? Typically speaking, if I was to take a hard drive out of one PC and put it in another one it probably would work, but windows would notice the different hardware and prompt for re-activation (Same as modern versions of office). I am curious how this would work as I have read the article thoroughly and can't seem to find any reference to circumvent this.

Thanks in advance, and sorry if I missed something.

  On 01/05/2013 at 18:37, Smiler Martin Hudgeon said:

Excellent tutorial!

One question though, and this might seem na?ve, but how does activation function here? Typically speaking, if I was to take a hard drive out of one PC and put it in another one it probably would work, but windows would notice the different hardware and prompt for re-activation (Same as modern versions of office). I am curious how this would work as I have read the article thoroughly and can't seem to find any reference to circumvent this.

Thanks in advance, and sorry if I missed something.

I believe you'd have to have a separate license for it that way. Windows To Go is an enterprise Windows feature and the license for it should be included in your volume license agreement.

This topic is now closed to further replies.
  • Posts

    • Arlo Essential 2K Indoor Camera: Unpacking the features and value of this home security cam by Paul Hill Are you in the UK and looking for internal cameras to keep an eye on your pets or property? If so, the Arlo Essential 2K indoor security camera (2-pack) is now discounted by 26% from its £159.99 RRP to just £119.00. As usual, the product is available with free delivery and free returns, which is helpful if the product turns out to be defective. In addition to the discounted product, the listing also notes there’s a £10-off voucher available until Monday and a £10 Morrisons on Amazon voucher. Arlo is a reputable brand for home security cameras so this deal marks a great opportunity if you’ve been looking for this type of device. Do note that it is a wired camera so it’ll have to be plugged in somewhere. Deep dive into camera features and capabilities The Arlo Essential 2K indoor security camera comes with a very good 2K (up to 2,560x1,440) resolution that provides you with clear, detailed video, great if you want to keep an eye on smaller pets such as kittens. Not only is the camera high-quality, but the camera is equipped with black and white night vision (it can see up to 7 metres), so you can see any events that occur at night. This Arlo security cam features two-way audio with noise reduction and echo cancellation allowing you to chat with anyone coming to feed your pets. There’s also an automatic privacy lens cover that physically blocks the lens when disarmed, providing you with more privacy when at home. There is also passive infrared motion detection that has a range of 7 metres. You can use motion detection in combination with the 80 dB smart siren to scare away intruders. The siren can also be activated manually. The Arlo Essential 2K features a 130-degree wide-angle diagonal view, which is sufficient for most rooms, to capture more of what’s going on in the room and there is 12x digital zoom to take a closer look at objects. It’s compatible with pretty much all Wi-Fi devices with its 2.4GHz Wi-Fi support and it integrates with your smart home via Amazon Alexa, Google Assistant, and IFTTT. Leveraging the Arlo Secure subscription for enhanced security When you buy the Arlo Essential 2K, you get a 30-day free trial of the Arlo Secure subscription, and if you want to continue it, it costs from £11.99 per month or £119.90 per year. This subscription isn’t necessary for basic functionality, but it does unlock the full potential of the camera. When you subscribe you get secure cloud storage for video history (30 to 60 days depending on plan); AI-powered identification of people, animals, vehicles, and packages, reducing false alerts; custom activity zones that let you define areas for motion detection, minimising unwanted notifications; and interactive notifications that can be interacted with from the lock screen like view animated previews, activate siren, and call emergency services. My biggest issue with this camera is that there is no local storage for recordings, necessitating the need to buy the subscription if you want to save any footage. If you’re thinking of using this camera to protect your home from theft and want footage to give to the police, you’ll need a subscription. An alternative to a subscription is buying the Arlo SmartHub (VMB5000) which is compatible with the Arlo Essential 2K indoor camera, according to Arlo’s website. The savings on this camera twin-pack are significant and it’s the lowest price they’ve been at on Amazon UK so they’re definitely worth considering for your home. If you don’t mind the subscription or have the Arlo SmartHub already, then this camera makes sense. If not, then you may be better off with a camera that comes with an SD card slot and recording capabilities. Arlo Essential 2K Indoor Pet Security Camera (2-pack): £119 + £10-off voucher + £10 for Morrisons on Amazon (Amazon UK) / MSRP £159.99 This Amazon deal is U.K. specific, and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon UK deals page here. Get Prime, Prime Video, Music Unlimited, Audible or Kindle Unlimited, free for the first 30 days As an Amazon Associate we earn from qualifying purchases.
    • The Nokia Lumias? Or the third-party HTC One8's? I had HTC's hardware cuz it was slick and reliable... but, yeah, the software left me wanting more and I just couldn't allocate personal time to develop all of the software I would have wanted to see (overworked in other capacities @ MSFT at the time, heh).
    • Microsoft's mobile strategy had great future vision and UX research, but mediocre engineering and inadequate support (third-party and internal business alike). The death knell for WinMo was Google's (mostly YouTube's) incessant API blocking and purposeful release of buggy WinMo builds to force consumers to stay away -- and this was conducted via sabotage of whatever partnerships they were supposed to play nice in. I still yearn for that UI on a modern smartphone...
    • Linux has always been an option but never adopted by the masses despite being free. The reasons are limited usability and features. Despite everything we all complaint about with MS , the overall experience for the general public is much better than what Linux can deliver.
    • If nothing works automatically for you, I'd say pick a better/different distro. Granted, it's trickier with laptops because they use all kinds of weird hardware, but still. I actually just did a fresh Arch Linux install on my netbook, and given that Arch is certainly not an "automagical" distro, I had to do very little manual tweaking, everything but the audio worked out of the box (including plasma and Wayland) and the audio was simply an issue of installing an additional firmware package that wasn't included in the default selection. Which is equivalent of installing additional drivers in Windows. Surely a more user-oriented distro would be even less troublesome (but granted, I haven't used/tested anything outside of Arch for quite some time). And let's not forget that a fair bit of issues that get blamed on Linux (though it also applies to Windows issues) are actually caused by hardware vendors not giving a damn.
  • Recent Achievements

    • One Month Later
      POR2GAL4EVER earned a badge
      One Month Later
    • One Year In
      Orpheus13 earned a badge
      One Year In
    • One Month Later
      Orpheus13 earned a badge
      One Month Later
    • Week One Done
      Orpheus13 earned a badge
      Week One Done
    • Week One Done
      serfegyed earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      563
    2. 2
      ATLien_0
      256
    3. 3
      +Edouard
      163
    4. 4
      +FloatingFatMan
      157
    5. 5
      Michael Scrip
      109
  • Tell a friend

    Love Neowin? Tell a friend!