Recommended Posts

  • 2 weeks later...

Nice! :D

 

Although if I were you, I would get this:

 

http://www.overclockers.co.uk/showproduct.php?prodid=MO-128-LG&groupid=17&catid=2898

 

Freesync + 75HZ + supposedly improved motion clarity

 

Although freesync only works between 48-75 FPS + you would need a 29x or 285 AMD card for it to work.

 

 

BTW, for those that hate glossy plastic:

 

 

My stand (haven't done the upper part yet) and bottom strip now:

 

VNdML20h.jpg

 

rw38HA9h.jpg

 

I over did it a bit too much but either way it is still far better than the full on gloss finish! :D

  • Like 1

Nice! :D

 

Although if I were you, I would get this:

 

http://www.overclockers.co.uk/showproduct.php?prodid=MO-128-LG&groupid=17&catid=2898

 

Freesync + 75HZ + supposedly improved motion clarity

 

Although freesync only works between 48-75 FPS + you would need a 29x or 285 AMD card for it to work.

 

 

Yeah, I saw that one, but I didn't think my graphics card would allow me to use the monitor to it's full advantage and only having a SFF not enough room to upgrade to a 29x.

 

The bottom bezel looks great - not too sure about the stand though.

You would still get the benefit of improved motion clarity + higher refresh rate/less input lag, just freesync you would lose out on (which isn't great anyway since it only works between 48 and 75 on that particular panel), if you do't mind losing out on the adjustable stand of the UB65 and the difference in cost isn't too much, I would definitely switch your order, mainly just to future proof yourself a bit more.

 

Also, I think you might get a few other features over the UB65 model:

 

 

i.e. that black stabilizer feature, which looks very good. That is for the 34" version, but I imagine you would get the same new features etc.

 

 

Yeah for some reason, those finger prints marks/spots on the stand don't seem to be coming of and I applied a bit too much pressure to it as you can probably tell from the deep looking scratches :p Even though it is overdone, it is much better than the gloss imo. I am going to do the rest sometime this week, just got the back, top, sides and the bottom of the monitor + the rest of the stand to do.

  • Like 1

Yes I guess, but the ETA isn't till towards the end of May for the 29" version, plus I've ordered the UB65 from eBuyer not Overclockers, not sure if I want to mess around cancelling to wait 2 months to get one. I'm not a heavy gamer, just a casual game of Diablo 3 now and then.

 

Thanks for the advice but I think'll I stick with the UB65. 

 

Next upgrade I'll be sure to seek to look into this more.

Well, I have my 29UB55, whilst I've had very little use so far, I'm feeling a little underwhelmed with it, as to why, I'm not sure yet. I'm hoping after the next few days when I should be around a bit more, it will begin to grow on me a little more.

 

Hopefully I'll see a bit more of the benefits once I get back into my coding etc.

Whether it's because the mental picture of it in my mind differs from what it actually is I'm not sure. Didn't find any in shops that I could have a look at before purchase, so it's been researched online and reading lot's of different reviews etc.

 

The monitor is working great with no issues but I think it may just be the "newness" of the screen width and that, once I've used it for an extend period of time I'm sure it will be fine. 

 

I'll post a review in a few days once I've used it for longer than half an hour!

  • 1 month later...
Over the last few week, I have noticed some excessive IPS glow/bleed on my 29um65, mainly because I have been watching more dark content i.e. daredevil, game of thrones etc. not sure how this has come about...
 
Here is a photo of when I first got my monitor back in July:
 
lpy6QF6h.jpg
 
And a photo of it now at the same brightness (13%) with the same camera etc.:
 
UMahJdyh.jpg
 
Even with 0% brightness and the LED strip light turned on, it is still noticeable:
 
8U5K8mNh.jpg
 
ETlGAyFh.jpg
 
IIRC this has happened with a couple of guys LG 34" screens after a few months and they had to send them back and deal with the poor service.
 
EDIT:
 
Banding was down to my display port cable, with the provided HDMI cable, the noticeable banding has gone.
  • 10 months later...
  • 2 weeks later...

Nothing more of a let down than when you buy something, think you made a good decision, like your purchase - and someone says, "you should have bought this ..."

Like the kind of person who, when you bring over your new car for them to check out - and the first thing out of their mouth is "is that a door ding ?"

  • Jim K locked this topic
This topic is now closed to further replies.
  • Posts

    • Fastfetch 2.64 released bringing new logos and other improvements by David Uzondu Fastfetch, the popular command-line system information tool that developers created as a fast alternative to the classic Neofetch utility, has updated its codebase to version 2.64, bringing experimental scripting power, streamlined compilation options, a smarter logo renderer, and Codec module support. As noted earlier, Fastfetch can now detect hardware-accelerated video codecs across Windows, macOS, Linux, and Android through this new Codec module. On Linux and BSD, the utility uses VA-API by default, with a fallback to VDPAU on Nvidia hardware if compiled with libva and libvdpau. Windows users get D3D12VA on Windows 11 or D3D11VA with Media Foundation Transforms on older systems, while macOS relies on VideoToolbox and Android utilizes AMediaCodec. You can manually toggle Vulkan Video via the config file, and the program will report both encoders and decoders unless configured otherwise. Logo support for Quasar, Origami, Origami_small, NixOS2, and BerserkArch also landed in this release. BerserkArch, if you have never heard of it, is a specialized Arch Linux derivative that targets security researchers and power users. This distro comes with an offensive security tool manager, simply called berserk, which allows users to install complex hacking toolkits with single terminal commands. Moving on, Fastfetch now has experimental scripting options for custom formats using Lua or QuickJS. The Lua integration supports versions 5.3 through 5.5, sharing a single interpreter instance across all modules so you can store variables globally. T Alternatively, if you prefer JavaScript, you can use QuickJS-ng version 0.15.0 or newer to evaluate your custom formats with the qjs: prefix. Other changes that version 2.64 brings include native CMake compilation flags to disable specific modules to shrink the final binary size. Users can delete unwanted ASCII logo files directly from the source directory before building to save additional space. The format engine now boasts ANSI-escape awareness, meaning you can center text with the new vertical bar specifier without breaking colored outputs. Haiku users receive preliminary support for boot manager, window manager theme, screen brightness, and other basic properties. Finally, the Linux edition now extracts desktop wallpaper and theme details from the modern COSMIC desktop environment.
    • That's a good number until the game you want to play is not in that list. 
    • So, the logo means No ducking AI?
    • For sure, humanity us highly unlikely to survive the helium flash. Even if we have colonized moons in the outer planets by then, that is such a monumental change in heat output, coupled with the destruction of Earth, it's unlikely we could be fully prepared for changes of that scale.
  • Recent Achievements

    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
    • Week One Done
      jefred earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      473
    2. 2
      PsYcHoKiLLa
      237
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      70
    5. 5
      Michael Scrip
      59
  • Tell a friend

    Love Neowin? Tell a friend!