Recommended Posts

3 hours ago, wetworker said:

Has anyone experience this.

When I have Dopamine playing music no other Audio plays on my computer, that includes YouTube videos.

The only way I can get YouTube audio is to kill both the browser and Dopamine.

 

I get the same results on FF,Chrome and Edge.

Maybe a problem with "Exclusive Mode" in the settings of Dopamine.

 

Works good on Windows 10 x64 14393.82 with a Asus Xonar U7 and Edge (headphones or speakers mode).

  • Like 1

Thanks for the response guys.  I tried the latest version but the only version that works is Version 1.0.0 (Build 650)

 

Thank goodness because I usually record my Street Fighter 5 game-play while Dopamine is playing. Even street Fighter would have no Audio if Dopamine was playing at launch.

 

16 hours ago, wetworker said:

Has anyone experience this.

When I have Dopamine playing music no other Audio plays on my computer, that includes YouTube videos.

The only way I can get YouTube audio is to kill both the browser and Dopamine.

 

I get the same results on FF,Chrome and Edge.

Did you enable "Exclusive mode" in the audio settings? All reports I got about sound issues in other apps are caused by the user enabling that mode. 

 

I wonder if I shouldn't just remove it, as I'm getting a lot of such reports. Exclusive mode is a WASAPI feature that allows direct access to your audio device. It should allows lower latency audio, but also takes exclusive access to the audio device (that's by WASAPI design), which means no other software can play audio while another application has  exclusive access.

 

Or maybe I should pop up an enormous warning when the user tries to enable this mode :) 

2 hours ago, wetworker said:

Thanks for the response guys.  I tried the latest version but the only version that works is Version 1.0.0 (Build 650)

That's strange. Dopamine has had exclusive mode since before that build. Could you verify that exclusive mode is disabled when you use the latest build? 

4 hours ago, Raphaël G. said:

That's strange. Dopamine has had exclusive mode since before that build. Could you verify that exclusive mode is disabled when you use the latest build? 

I can't remember turning  "Exclusive mode" on but it's possible I did.  In 1.0.0 (Build 650) "Exclusive mode" was turned off by default  because I did a clean install.

I also just updated to the latest version 1.1 ( Build 681) and I can now play YouTube audio while Dopamine is playing. "Exclusive mode" is also off. 

 

Yes maybe a message about  turning "Exclusive mode" on might help :) 

 

Thanks for the help.

  • Like 1

Hi everyone,

 

 

Another build has been released: 1.1 Build 685.

 

 

This is the changelog:

 

– [Added] Added a confirmation dialog when enabling WASAPI Exclusive mode
– [Added] Added Bitrate column on Songs screen
– [Fixed] Duplicate semantic Artist and Genre groups appear after performing a search
– [Fixed] Removed songs can still be played when pressing the play button

 

Only 2 issues remaining before the release of 1.1 final.

 

Download here.

 

Enjoy!

  • Like 4

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

On ‎27‎/‎08‎/‎2016 at 9:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

You could try a combination with the other shuffle button, like repeat button ?

2 hours ago, accuratecopy said:

You could try a combination with the other shuffle button, like repeat button ?

Not sure. Pressing "Shuffle all" should immediately queue all songs. Th other shuffle just shuffles what's already queued. It might be confusing to combine both.

5 minutes ago, jasondefaoite said:

Raphaël, did you make a change for the Album Artist tag? I've re-added my entire collection back into the latest release and they are tagged based off the Artist if the Album Artist is blank, which is exactly what I needed. Great!!

Yes. Actually, somebody did it for me. The wonders of open source :) 

  • Like 4
On 8/27/2016 at 2:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

I've seen some music players place the "shuffle All" option at the top of the music list (list goes "Shuffle All" then #d songs, As. etc) and I personally like it that way

On 27/08/2016 at 8:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

It may not be completely obvious but shuffle all is already easily possible by simply opening up the app and then double clicking any song from the artists songs on the right whilst having shuffle enabled - this is how I've used Dopamine and probably MusiX from the start.

 

Other than that I think the only other possible option would be to maybe double press on the shuffle option? so you have three states to switch between - normal top to bottom, shuffle playlist, shuffle all and then back again?

A new preview is available: Dopamine 1.1 build 694 Preview.

 

This is the change log:

 

– [Added] Added customizable online search for videos and lyrics
– [Changed] Updated the Portuguese translation
– [Fixed] Playlist window visibility incorrect when switching between Mini players
– [Fixed] Left part of Mini player playlist is unclickable
– [Fixed] Bluetooth headset play/pause button not detected

 

Download here

 

Edit: I also fixed creation of multiple instances of Dopamine when changing audio device. That's however not listed in the change log as it was a regression from version 1.0.

On 8/30/2016 at 9:46 AM, Skiver said:

It may not be completely obvious but shuffle all is already easily possible by simply opening up the app and then double clicking any song from the artists songs on the right whilst having shuffle enabled - this is how I've used Dopamine and probably MusiX from the start.

 

Other than that I think the only other possible option would be to maybe double press on the shuffle option? so you have three states to switch between - normal top to bottom, shuffle playlist, shuffle all and then back again?

Your way of shuffling all, is indeed how I designed it since the beginning.

I'd like to avoid double press on the shuffle button. But thanks for thinking about it. This feature is so hard to add :) 

7 minutes ago, dakn said:

How's about like this? Combining Groove into your layout:

 

shuffle.png

 

Shuffle icon is a bit massive but it was a quick mock up :)

This idea makes sense :) Maybe not 100% like this, but it looks like a good spot to but the shuffle all button. I'll try it out tonight. Thanks!

6 minutes ago, dakn said:

^ That image highlights a small issue: Artist names are case sensitive.

Indeed. It has been logged :) : https://github.com/digimezzo/Dopamine/issues/63 

  • Like 1
3 minutes ago, Raphaël G. said:

This idea makes sense :) Maybe not 100% like this, but it looks like a good spot to but the shuffle all button. I'll try it out tonight. Thanks!

Indeed. It has been logged :) : https://github.com/digimezzo/Dopamine/issues/63 

I do use shuffle all a lot when I use Groove on the kitchen tablet but it's not something I've ever thought Dopamine needed due to what Skiver mentioned. Would still be a nice addition though. :)

@Raphaël G., how can I manually delete my library?

 

For the past two builds, Dopamine has wanted to scan my library each time I start the program. It scans the music and then proceeds to update the album covers, but this process never ends. And because of that I can't delete folders from the settings option, because it keeps saying "Refreshing your collection".

On 8/24/2016 at 9:59 AM, Raphaël G. said:

Did you enable "Exclusive mode" in the audio settings? All reports I got about sound issues in other apps are caused by the user enabling that mode. 

 

I wonder if I shouldn't just remove it, as I'm getting a lot of such reports. Exclusive mode is a WASAPI feature that allows direct access to your audio device. It should allows lower latency audio, but also takes exclusive access to the audio device (that's by WASAPI design), which means no other software can play audio while another application has  exclusive access.

 

Or maybe I should pop up an enormous warning when the user tries to enable this mode :) 

I think you most definitely should keep it. I, personally, much prefer a warning dialogue—and actually think it's a good idea—over losing such an important feature.

  • Like 1
2 hours ago, Setnom said:

@Raphaël G., how can I manually delete my library?

 

For the past two builds, Dopamine has wanted to scan my library each time I start the program. It scans the music and then proceeds to update the album covers, but this process never ends. And because of that I can't delete folders from the settings option, because it keeps saying "Refreshing your collection".

Can you send me your logfile? I'd like to know what it is trying to do.

You can delete Dopamine.db. You can find it in folder %appdata%\dopamine

 

1 hour ago, Jub Fequois said:

I think you most definitely should keep it. I, personally, much prefer a warning dialogue—and actually think it's a good idea—over losing such an important feature.

I decided to keep it. There is a warning popup now since a few builds.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Media Player Classic - Home Cinema 2.7.2 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.2 changelog: Updated LAV Filters to version 0.81-23-g6fadb Updated MPC Video Renderer to version 0.10.2.2540 Updated MediaInfo DLL to version 26.05 Updated MPC Audio Renderer Several crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.2 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.2 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • No problems here using the new Outlook. In our company we started to default installing to users on new computers or when we're reimaging. But, if the user needs/ask for the classic one, we install it. Low reject rate at this point.
    • Yeah it's my only home/business computer. The Surface Pen magnetic Storage is on the left side, but it doesn't charge the Pen. I do the charging once every 6+ months by interchanging between 2 rechargeable AAAA batteries and charging the other via a USB A battery charger.
    • I have NO problem restricting minors having access to apps. Personally, I'd like to see the restriction extend to smartphones too, but that should be the parents anyway. But on the restrictions ? GOOD LUCK enforcing that. Between VPN's, side loading and what not, I'm sure kids will find a way around it.
  • Recent Achievements

    • Very Popular
      s0nic69 earned a badge
      Very Popular
    • Collaborator
      Asgardi earned a badge
      Collaborator
    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      466
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      65
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!