Recommended Posts

3 hours ago, wetworker said:

Has anyone experience this.

When I have Dopamine playing music no other Audio plays on my computer, that includes YouTube videos.

The only way I can get YouTube audio is to kill both the browser and Dopamine.

 

I get the same results on FF,Chrome and Edge.

Maybe a problem with "Exclusive Mode" in the settings of Dopamine.

 

Works good on Windows 10 x64 14393.82 with a Asus Xonar U7 and Edge (headphones or speakers mode).

  • Like 1

Thanks for the response guys.  I tried the latest version but the only version that works is Version 1.0.0 (Build 650)

 

Thank goodness because I usually record my Street Fighter 5 game-play while Dopamine is playing. Even street Fighter would have no Audio if Dopamine was playing at launch.

 

16 hours ago, wetworker said:

Has anyone experience this.

When I have Dopamine playing music no other Audio plays on my computer, that includes YouTube videos.

The only way I can get YouTube audio is to kill both the browser and Dopamine.

 

I get the same results on FF,Chrome and Edge.

Did you enable "Exclusive mode" in the audio settings? All reports I got about sound issues in other apps are caused by the user enabling that mode. 

 

I wonder if I shouldn't just remove it, as I'm getting a lot of such reports. Exclusive mode is a WASAPI feature that allows direct access to your audio device. It should allows lower latency audio, but also takes exclusive access to the audio device (that's by WASAPI design), which means no other software can play audio while another application has  exclusive access.

 

Or maybe I should pop up an enormous warning when the user tries to enable this mode :) 

2 hours ago, wetworker said:

Thanks for the response guys.  I tried the latest version but the only version that works is Version 1.0.0 (Build 650)

That's strange. Dopamine has had exclusive mode since before that build. Could you verify that exclusive mode is disabled when you use the latest build? 

4 hours ago, Raphaël G. said:

That's strange. Dopamine has had exclusive mode since before that build. Could you verify that exclusive mode is disabled when you use the latest build? 

I can't remember turning  "Exclusive mode" on but it's possible I did.  In 1.0.0 (Build 650) "Exclusive mode" was turned off by default  because I did a clean install.

I also just updated to the latest version 1.1 ( Build 681) and I can now play YouTube audio while Dopamine is playing. "Exclusive mode" is also off. 

 

Yes maybe a message about  turning "Exclusive mode" on might help :) 

 

Thanks for the help.

  • Like 1

Hi everyone,

 

 

Another build has been released: 1.1 Build 685.

 

 

This is the changelog:

 

– [Added] Added a confirmation dialog when enabling WASAPI Exclusive mode
– [Added] Added Bitrate column on Songs screen
– [Fixed] Duplicate semantic Artist and Genre groups appear after performing a search
– [Fixed] Removed songs can still be played when pressing the play button

 

Only 2 issues remaining before the release of 1.1 final.

 

Download here.

 

Enjoy!

  • Like 4

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

On ‎27‎/‎08‎/‎2016 at 9:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

You could try a combination with the other shuffle button, like repeat button ?

2 hours ago, accuratecopy said:

You could try a combination with the other shuffle button, like repeat button ?

Not sure. Pressing "Shuffle all" should immediately queue all songs. Th other shuffle just shuffles what's already queued. It might be confusing to combine both.

5 minutes ago, jasondefaoite said:

Raphaël, did you make a change for the Album Artist tag? I've re-added my entire collection back into the latest release and they are tagged based off the Artist if the Album Artist is blank, which is exactly what I needed. Great!!

Yes. Actually, somebody did it for me. The wonders of open source :) 

  • Like 4
On 8/27/2016 at 2:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

I've seen some music players place the "shuffle All" option at the top of the music list (list goes "Shuffle All" then #d songs, As. etc) and I personally like it that way

On 27/08/2016 at 8:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

It may not be completely obvious but shuffle all is already easily possible by simply opening up the app and then double clicking any song from the artists songs on the right whilst having shuffle enabled - this is how I've used Dopamine and probably MusiX from the start.

 

Other than that I think the only other possible option would be to maybe double press on the shuffle option? so you have three states to switch between - normal top to bottom, shuffle playlist, shuffle all and then back again?

A new preview is available: Dopamine 1.1 build 694 Preview.

 

This is the change log:

 

– [Added] Added customizable online search for videos and lyrics
– [Changed] Updated the Portuguese translation
– [Fixed] Playlist window visibility incorrect when switching between Mini players
– [Fixed] Left part of Mini player playlist is unclickable
– [Fixed] Bluetooth headset play/pause button not detected

 

Download here

 

Edit: I also fixed creation of multiple instances of Dopamine when changing audio device. That's however not listed in the change log as it was a regression from version 1.0.

On 8/30/2016 at 9:46 AM, Skiver said:

It may not be completely obvious but shuffle all is already easily possible by simply opening up the app and then double clicking any song from the artists songs on the right whilst having shuffle enabled - this is how I've used Dopamine and probably MusiX from the start.

 

Other than that I think the only other possible option would be to maybe double press on the shuffle option? so you have three states to switch between - normal top to bottom, shuffle playlist, shuffle all and then back again?

Your way of shuffling all, is indeed how I designed it since the beginning.

I'd like to avoid double press on the shuffle button. But thanks for thinking about it. This feature is so hard to add :) 

7 minutes ago, dakn said:

How's about like this? Combining Groove into your layout:

 

shuffle.png

 

Shuffle icon is a bit massive but it was a quick mock up :)

This idea makes sense :) Maybe not 100% like this, but it looks like a good spot to but the shuffle all button. I'll try it out tonight. Thanks!

6 minutes ago, dakn said:

^ That image highlights a small issue: Artist names are case sensitive.

Indeed. It has been logged :) : https://github.com/digimezzo/Dopamine/issues/63 

  • Like 1
3 minutes ago, Raphaël G. said:

This idea makes sense :) Maybe not 100% like this, but it looks like a good spot to but the shuffle all button. I'll try it out tonight. Thanks!

Indeed. It has been logged :) : https://github.com/digimezzo/Dopamine/issues/63 

I do use shuffle all a lot when I use Groove on the kitchen tablet but it's not something I've ever thought Dopamine needed due to what Skiver mentioned. Would still be a nice addition though. :)

@Raphaël G., how can I manually delete my library?

 

For the past two builds, Dopamine has wanted to scan my library each time I start the program. It scans the music and then proceeds to update the album covers, but this process never ends. And because of that I can't delete folders from the settings option, because it keeps saying "Refreshing your collection".

On 8/24/2016 at 9:59 AM, Raphaël G. said:

Did you enable "Exclusive mode" in the audio settings? All reports I got about sound issues in other apps are caused by the user enabling that mode. 

 

I wonder if I shouldn't just remove it, as I'm getting a lot of such reports. Exclusive mode is a WASAPI feature that allows direct access to your audio device. It should allows lower latency audio, but also takes exclusive access to the audio device (that's by WASAPI design), which means no other software can play audio while another application has  exclusive access.

 

Or maybe I should pop up an enormous warning when the user tries to enable this mode :) 

I think you most definitely should keep it. I, personally, much prefer a warning dialogue—and actually think it's a good idea—over losing such an important feature.

  • Like 1
2 hours ago, Setnom said:

@Raphaël G., how can I manually delete my library?

 

For the past two builds, Dopamine has wanted to scan my library each time I start the program. It scans the music and then proceeds to update the album covers, but this process never ends. And because of that I can't delete folders from the settings option, because it keeps saying "Refreshing your collection".

Can you send me your logfile? I'd like to know what it is trying to do.

You can delete Dopamine.db. You can find it in folder %appdata%\dopamine

 

1 hour ago, Jub Fequois said:

I think you most definitely should keep it. I, personally, much prefer a warning dialogue—and actually think it's a good idea—over losing such an important feature.

I decided to keep it. There is a warning popup now since a few builds.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Amazon eero Pro 6E mesh Wi-Fi system 2-pack is 27% off by Ivan Jenic The Amazon eero Pro 6E mesh Wi-Fi system is currently $239.99 on Amazon for the 2-pack, down from $329.99. That's 27% off and $90 saved for a solid Wi-Fi solution that covers your entire home (purchase link down below). The 2-pack covers up to 4,000 square feet (372 square meters) and supports 100+ connected devices, which handles the vast majority of home setups without breaking a sweat. Wi-Fi 6E brings access to the 6 GHz band for lower latency across the network, and the 2.5 Gb Ethernet port supports gigabit+ internet plans if your ISP offers them. eero's TrueMesh technology handles traffic routing automatically, so you're not manually managing which devices connect to which node. You set up the entire thing through the eero app, and the entire process takes a few minutes. The system also receives automatic security updates in the background, so once you set it up, you don't have to worry about compatibility issues. If you're covering a larger home or want more nodes, the 3-pack is $329.99 and the 4-pack is $479.98, both at similar discount levels. It's worth mentioning that a newer model exists, which is likely the reason for the discount, but the Pro 6E is still perfectly capable hardware for most homes. Amazon eero Pro 6E mesh Wi-Fi system 2-pack - $239.99 | 27% off on Amazon This Amazon deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • On Tuesday, Microsoft drilled another hole in the duo's sinking relationship with the debut of its MAI-Thinking-1 AI model, a midsize model that the company said is intended for high-efficiency, low-token-cost situations...... https://finance.yahoo.com/markets/article/microsoft-and-openais-relationship-continues-to-crumble-183330195.html  
    • Ladybird Browser is no longer accepting outside contributions thanks to AI by David Uzondu The Ladybird Browser Project has announced it will no longer accept public pull requests and will limit changes to those made by its maintainers as it works towards its first alpha release. According to Ladybird's creator Andreas Kling, this is "not a change we make lightly," but the rapid shift in AI capabilities forced their hand. Previously, a massive PR implied that the person behind it put a lot of care into the code and is ready to "answer for the consequences." Now with AI, anyone can generate a PR without even understanding the bug fix or feature they want merged. The blog post goes on to say that the team is closing all open public pull requests immediately, and that maintainers will not treat external forks as a review queue for upstream Ladybird. Instead, the team wants outside contributors to focus on reporting bugs and running tests. Kling started Ladybird back in 2019 as LibHTML, a simple HTML viewer for his hobby operating system, SerenityOS, but by September 2022, it had turned into a full-fledged browser project. What sets Ladybird apart from the likes of Google Chrome, Apple Safari, or Mozilla Firefox is its totally independent engine, which does not rely on pre-existing codebases. The project maintains a strict policy against default search engine deals or user data monetization, keeping development funded entirely by donations and sponsorships. Generative AI is forcing open source project maintainers to rethink how they handle public code contributions (and the whole open-source thing in general). One month ago, a leak about the National Health Service (NHS) suggested the organization was planning to take all of its public repositories private ahead of a May 11 deadline, thanks to Mythos (an AI model that Anthropic believes is too dangerous to be released to the public) and its ability to find and write exploits for zero-day vulnerabilities. Thankfully, the Government Digital Service (GDS) issued a counter-report titled "AI, open code and vulnerability risk in the public sector" that stopped the shutdown by pointing out that hiding code does not improve security.
    • Kalmuri 4.2.4 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.4 changelog: Fixed an issue where color picking could occasionally freeze Improved capture stability Resolved a possible unexpected app shutdown in certain cases Refined internal handling for a smoother experience Download: Kalmuri 4.2.4 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.4 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I like the show more options. The only problem with it is that it's not always in a consistent spot in the menu. If the copy/paste/cut, happens to show on top, then more option is the last in the menu. But if copy/paste/cut happens to show on the bottom, then more options is before the copy/paste/cut. But I do like the more options because it hides the stuff that I rarely use. But I would like to choose what it is or isn't hiding. That would make it better.
  • Recent Achievements

    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      484
    2. 2
      PsYcHoKiLLa
      258
    3. 3
      Skyfrog
      84
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      63
  • Tell a friend

    Love Neowin? Tell a friend!