Recommended Posts

3 hours ago, wetworker said:

Has anyone experience this.

When I have Dopamine playing music no other Audio plays on my computer, that includes YouTube videos.

The only way I can get YouTube audio is to kill both the browser and Dopamine.

 

I get the same results on FF,Chrome and Edge.

Maybe a problem with "Exclusive Mode" in the settings of Dopamine.

 

Works good on Windows 10 x64 14393.82 with a Asus Xonar U7 and Edge (headphones or speakers mode).

  • Like 1

Thanks for the response guys.  I tried the latest version but the only version that works is Version 1.0.0 (Build 650)

 

Thank goodness because I usually record my Street Fighter 5 game-play while Dopamine is playing. Even street Fighter would have no Audio if Dopamine was playing at launch.

 

16 hours ago, wetworker said:

Has anyone experience this.

When I have Dopamine playing music no other Audio plays on my computer, that includes YouTube videos.

The only way I can get YouTube audio is to kill both the browser and Dopamine.

 

I get the same results on FF,Chrome and Edge.

Did you enable "Exclusive mode" in the audio settings? All reports I got about sound issues in other apps are caused by the user enabling that mode. 

 

I wonder if I shouldn't just remove it, as I'm getting a lot of such reports. Exclusive mode is a WASAPI feature that allows direct access to your audio device. It should allows lower latency audio, but also takes exclusive access to the audio device (that's by WASAPI design), which means no other software can play audio while another application has  exclusive access.

 

Or maybe I should pop up an enormous warning when the user tries to enable this mode :) 

2 hours ago, wetworker said:

Thanks for the response guys.  I tried the latest version but the only version that works is Version 1.0.0 (Build 650)

That's strange. Dopamine has had exclusive mode since before that build. Could you verify that exclusive mode is disabled when you use the latest build? 

4 hours ago, Raphaël G. said:

That's strange. Dopamine has had exclusive mode since before that build. Could you verify that exclusive mode is disabled when you use the latest build? 

I can't remember turning  "Exclusive mode" on but it's possible I did.  In 1.0.0 (Build 650) "Exclusive mode" was turned off by default  because I did a clean install.

I also just updated to the latest version 1.1 ( Build 681) and I can now play YouTube audio while Dopamine is playing. "Exclusive mode" is also off. 

 

Yes maybe a message about  turning "Exclusive mode" on might help :) 

 

Thanks for the help.

  • Like 1

Hi everyone,

 

 

Another build has been released: 1.1 Build 685.

 

 

This is the changelog:

 

– [Added] Added a confirmation dialog when enabling WASAPI Exclusive mode
– [Added] Added Bitrate column on Songs screen
– [Fixed] Duplicate semantic Artist and Genre groups appear after performing a search
– [Fixed] Removed songs can still be played when pressing the play button

 

Only 2 issues remaining before the release of 1.1 final.

 

Download here.

 

Enjoy!

  • Like 4

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

On ‎27‎/‎08‎/‎2016 at 9:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

You could try a combination with the other shuffle button, like repeat button ?

2 hours ago, accuratecopy said:

You could try a combination with the other shuffle button, like repeat button ?

Not sure. Pressing "Shuffle all" should immediately queue all songs. Th other shuffle just shuffles what's already queued. It might be confusing to combine both.

5 minutes ago, jasondefaoite said:

Raphaël, did you make a change for the Album Artist tag? I've re-added my entire collection back into the latest release and they are tagged based off the Artist if the Album Artist is blank, which is exactly what I needed. Great!!

Yes. Actually, somebody did it for me. The wonders of open source :) 

  • Like 4
On 8/27/2016 at 2:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

I've seen some music players place the "shuffle All" option at the top of the music list (list goes "Shuffle All" then #d songs, As. etc) and I personally like it that way

On 27/08/2016 at 8:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

It may not be completely obvious but shuffle all is already easily possible by simply opening up the app and then double clicking any song from the artists songs on the right whilst having shuffle enabled - this is how I've used Dopamine and probably MusiX from the start.

 

Other than that I think the only other possible option would be to maybe double press on the shuffle option? so you have three states to switch between - normal top to bottom, shuffle playlist, shuffle all and then back again?

A new preview is available: Dopamine 1.1 build 694 Preview.

 

This is the change log:

 

– [Added] Added customizable online search for videos and lyrics
– [Changed] Updated the Portuguese translation
– [Fixed] Playlist window visibility incorrect when switching between Mini players
– [Fixed] Left part of Mini player playlist is unclickable
– [Fixed] Bluetooth headset play/pause button not detected

 

Download here

 

Edit: I also fixed creation of multiple instances of Dopamine when changing audio device. That's however not listed in the change log as it was a regression from version 1.0.

On 8/30/2016 at 9:46 AM, Skiver said:

It may not be completely obvious but shuffle all is already easily possible by simply opening up the app and then double clicking any song from the artists songs on the right whilst having shuffle enabled - this is how I've used Dopamine and probably MusiX from the start.

 

Other than that I think the only other possible option would be to maybe double press on the shuffle option? so you have three states to switch between - normal top to bottom, shuffle playlist, shuffle all and then back again?

Your way of shuffling all, is indeed how I designed it since the beginning.

I'd like to avoid double press on the shuffle button. But thanks for thinking about it. This feature is so hard to add :) 

7 minutes ago, dakn said:

How's about like this? Combining Groove into your layout:

 

shuffle.png

 

Shuffle icon is a bit massive but it was a quick mock up :)

This idea makes sense :) Maybe not 100% like this, but it looks like a good spot to but the shuffle all button. I'll try it out tonight. Thanks!

6 minutes ago, dakn said:

^ That image highlights a small issue: Artist names are case sensitive.

Indeed. It has been logged :) : https://github.com/digimezzo/Dopamine/issues/63 

  • Like 1
3 minutes ago, Raphaël G. said:

This idea makes sense :) Maybe not 100% like this, but it looks like a good spot to but the shuffle all button. I'll try it out tonight. Thanks!

Indeed. It has been logged :) : https://github.com/digimezzo/Dopamine/issues/63 

I do use shuffle all a lot when I use Groove on the kitchen tablet but it's not something I've ever thought Dopamine needed due to what Skiver mentioned. Would still be a nice addition though. :)

@Raphaël G., how can I manually delete my library?

 

For the past two builds, Dopamine has wanted to scan my library each time I start the program. It scans the music and then proceeds to update the album covers, but this process never ends. And because of that I can't delete folders from the settings option, because it keeps saying "Refreshing your collection".

On 8/24/2016 at 9:59 AM, Raphaël G. said:

Did you enable "Exclusive mode" in the audio settings? All reports I got about sound issues in other apps are caused by the user enabling that mode. 

 

I wonder if I shouldn't just remove it, as I'm getting a lot of such reports. Exclusive mode is a WASAPI feature that allows direct access to your audio device. It should allows lower latency audio, but also takes exclusive access to the audio device (that's by WASAPI design), which means no other software can play audio while another application has  exclusive access.

 

Or maybe I should pop up an enormous warning when the user tries to enable this mode :) 

I think you most definitely should keep it. I, personally, much prefer a warning dialogue—and actually think it's a good idea—over losing such an important feature.

  • Like 1
2 hours ago, Setnom said:

@Raphaël G., how can I manually delete my library?

 

For the past two builds, Dopamine has wanted to scan my library each time I start the program. It scans the music and then proceeds to update the album covers, but this process never ends. And because of that I can't delete folders from the settings option, because it keeps saying "Refreshing your collection".

Can you send me your logfile? I'd like to know what it is trying to do.

You can delete Dopamine.db. You can find it in folder %appdata%\dopamine

 

1 hour ago, Jub Fequois said:

I think you most definitely should keep it. I, personally, much prefer a warning dialogue—and actually think it's a good idea—over losing such an important feature.

I decided to keep it. There is a warning popup now since a few builds.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Google are hyprocrites for signing this. They have been pulling the same dirty tactics as Microsoft, only they do it on Android and ChromeOS.
    • In some countries the law has forced Microsoft to display a menu on a fresh install of Windows which asks which web browser you want and it will install that browser. This doesn't add any bloat to Windows. It simply an additional step when setting up a new PC.
    • Chrome is also a first party browser on Android and ChromeOS. And on those systems, Google is pulling the same dirty tactics as Microsoft does on Windows.
    • Unofficial script lets you install unreleased Windows 11 features without Microsoft Account by Sayan Sen Microsoft has been steadily evolving the Windows Insider Program over the years, introducing new channels and testing paths that allow enthusiasts to experience upcoming and yet-to-be-released Windows features (some interesting hidden ones too) before they reach the public. However, one long-standing requirement has remained largely unchanged as users are generally expected to enroll in the Program and with a Microsoft account. That's where a third-party tool called "OfflineInsiderEnroll" can help. OfflineInsiderEnroll is said to be a lightweight script that enables access to Windows Insider Program builds on systems that are not signed in with a Microsoft account. Essentially the tool configures the necessary Insider settings locally and hence allows users to select and switch between available preview channels while continuing to receive builds through the normal Windows Update channel. If you are wondering how it manages to do so, it is made possible by a Registry value known as TestFlags. When configured to"0x20", Windows stops communicating with Microsoft's online Insider enrollment services thus preventing locally configured Insider settings from being overwritten. This allows the script to apply its own channel configuration directly through the Registry as Windows Update does not verify whether a device has been officially enrolled in the Insider Program or not. Previously the utility has had already supported the traditional Insider branches including Dev, Beta, and Release Preview. However following Microsoft’s recent restructuring of its preview channels, the script has now been updated. The latest OfflineInsiderEnroll version, 2.6.6, adds support for the newly introduced Insider channel lineup. As such, users can now choose from several Experimental channels in addition to Beta and Release Preview options. The update also retains tools for refreshing the Insider cache, resetting Insider settings, and completely stopping Insider enrollment when needed. Keep in mind though that will need elevated privileges when running the script (run as Admin). You can get the latest version of OfflineInsiderEnroll from this page on its official GitHub repo.
  • Recent Achievements

    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
    • Collaborator
      Asgardi earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      PsYcHoKiLLa
      250
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      67
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!