Recommended Posts

3 hours ago, wetworker said:

Has anyone experience this.

When I have Dopamine playing music no other Audio plays on my computer, that includes YouTube videos.

The only way I can get YouTube audio is to kill both the browser and Dopamine.

 

I get the same results on FF,Chrome and Edge.

Maybe a problem with "Exclusive Mode" in the settings of Dopamine.

 

Works good on Windows 10 x64 14393.82 with a Asus Xonar U7 and Edge (headphones or speakers mode).

  • Like 1

Thanks for the response guys.  I tried the latest version but the only version that works is Version 1.0.0 (Build 650)

 

Thank goodness because I usually record my Street Fighter 5 game-play while Dopamine is playing. Even street Fighter would have no Audio if Dopamine was playing at launch.

 

16 hours ago, wetworker said:

Has anyone experience this.

When I have Dopamine playing music no other Audio plays on my computer, that includes YouTube videos.

The only way I can get YouTube audio is to kill both the browser and Dopamine.

 

I get the same results on FF,Chrome and Edge.

Did you enable "Exclusive mode" in the audio settings? All reports I got about sound issues in other apps are caused by the user enabling that mode. 

 

I wonder if I shouldn't just remove it, as I'm getting a lot of such reports. Exclusive mode is a WASAPI feature that allows direct access to your audio device. It should allows lower latency audio, but also takes exclusive access to the audio device (that's by WASAPI design), which means no other software can play audio while another application has  exclusive access.

 

Or maybe I should pop up an enormous warning when the user tries to enable this mode :) 

2 hours ago, wetworker said:

Thanks for the response guys.  I tried the latest version but the only version that works is Version 1.0.0 (Build 650)

That's strange. Dopamine has had exclusive mode since before that build. Could you verify that exclusive mode is disabled when you use the latest build? 

4 hours ago, Raphaël G. said:

That's strange. Dopamine has had exclusive mode since before that build. Could you verify that exclusive mode is disabled when you use the latest build? 

I can't remember turning  "Exclusive mode" on but it's possible I did.  In 1.0.0 (Build 650) "Exclusive mode" was turned off by default  because I did a clean install.

I also just updated to the latest version 1.1 ( Build 681) and I can now play YouTube audio while Dopamine is playing. "Exclusive mode" is also off. 

 

Yes maybe a message about  turning "Exclusive mode" on might help :) 

 

Thanks for the help.

  • Like 1

Hi everyone,

 

 

Another build has been released: 1.1 Build 685.

 

 

This is the changelog:

 

– [Added] Added a confirmation dialog when enabling WASAPI Exclusive mode
– [Added] Added Bitrate column on Songs screen
– [Fixed] Duplicate semantic Artist and Genre groups appear after performing a search
– [Fixed] Removed songs can still be played when pressing the play button

 

Only 2 issues remaining before the release of 1.1 final.

 

Download here.

 

Enjoy!

  • Like 4

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

On ‎27‎/‎08‎/‎2016 at 9:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

You could try a combination with the other shuffle button, like repeat button ?

2 hours ago, accuratecopy said:

You could try a combination with the other shuffle button, like repeat button ?

Not sure. Pressing "Shuffle all" should immediately queue all songs. Th other shuffle just shuffles what's already queued. It might be confusing to combine both.

5 minutes ago, jasondefaoite said:

Raphaël, did you make a change for the Album Artist tag? I've re-added my entire collection back into the latest release and they are tagged based off the Artist if the Album Artist is blank, which is exactly what I needed. Great!!

Yes. Actually, somebody did it for me. The wonders of open source :) 

  • Like 4
On 8/27/2016 at 2:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

I've seen some music players place the "shuffle All" option at the top of the music list (list goes "Shuffle All" then #d songs, As. etc) and I personally like it that way

On 27/08/2016 at 8:39 AM, Raphaël G. said:

I need some help :) I've been asked to add a "Shuffle all" button, a la Groove (see screenshot). I like the idea, as it would minimize the amount of clicks required to shuffle all songs of the collection. However, I can't find the best spot to add this, without breaking the design.

 

Where would you see this button?

shuffle all.png

It may not be completely obvious but shuffle all is already easily possible by simply opening up the app and then double clicking any song from the artists songs on the right whilst having shuffle enabled - this is how I've used Dopamine and probably MusiX from the start.

 

Other than that I think the only other possible option would be to maybe double press on the shuffle option? so you have three states to switch between - normal top to bottom, shuffle playlist, shuffle all and then back again?

A new preview is available: Dopamine 1.1 build 694 Preview.

 

This is the change log:

 

– [Added] Added customizable online search for videos and lyrics
– [Changed] Updated the Portuguese translation
– [Fixed] Playlist window visibility incorrect when switching between Mini players
– [Fixed] Left part of Mini player playlist is unclickable
– [Fixed] Bluetooth headset play/pause button not detected

 

Download here

 

Edit: I also fixed creation of multiple instances of Dopamine when changing audio device. That's however not listed in the change log as it was a regression from version 1.0.

  • Like 4
On 8/30/2016 at 9:46 AM, Skiver said:

It may not be completely obvious but shuffle all is already easily possible by simply opening up the app and then double clicking any song from the artists songs on the right whilst having shuffle enabled - this is how I've used Dopamine and probably MusiX from the start.

 

Other than that I think the only other possible option would be to maybe double press on the shuffle option? so you have three states to switch between - normal top to bottom, shuffle playlist, shuffle all and then back again?

Your way of shuffling all, is indeed how I designed it since the beginning.

I'd like to avoid double press on the shuffle button. But thanks for thinking about it. This feature is so hard to add :) 

7 minutes ago, dakn said:

How's about like this? Combining Groove into your layout:

 

shuffle.png

 

Shuffle icon is a bit massive but it was a quick mock up :)

This idea makes sense :) Maybe not 100% like this, but it looks like a good spot to but the shuffle all button. I'll try it out tonight. Thanks!

6 minutes ago, dakn said:

^ That image highlights a small issue: Artist names are case sensitive.

Indeed. It has been logged :) : https://github.com/digimezzo/Dopamine/issues/63 

  • Like 1
3 minutes ago, Raphaël G. said:

This idea makes sense :) Maybe not 100% like this, but it looks like a good spot to but the shuffle all button. I'll try it out tonight. Thanks!

Indeed. It has been logged :) : https://github.com/digimezzo/Dopamine/issues/63 

I do use shuffle all a lot when I use Groove on the kitchen tablet but it's not something I've ever thought Dopamine needed due to what Skiver mentioned. Would still be a nice addition though. :)

@Raphaël G., how can I manually delete my library?

 

For the past two builds, Dopamine has wanted to scan my library each time I start the program. It scans the music and then proceeds to update the album covers, but this process never ends. And because of that I can't delete folders from the settings option, because it keeps saying "Refreshing your collection".

On 8/24/2016 at 9:59 AM, Raphaël G. said:

Did you enable "Exclusive mode" in the audio settings? All reports I got about sound issues in other apps are caused by the user enabling that mode. 

 

I wonder if I shouldn't just remove it, as I'm getting a lot of such reports. Exclusive mode is a WASAPI feature that allows direct access to your audio device. It should allows lower latency audio, but also takes exclusive access to the audio device (that's by WASAPI design), which means no other software can play audio while another application has  exclusive access.

 

Or maybe I should pop up an enormous warning when the user tries to enable this mode :) 

I think you most definitely should keep it. I, personally, much prefer a warning dialogue—and actually think it's a good idea—over losing such an important feature.

  • Like 1
2 hours ago, Setnom said:

@Raphaël G., how can I manually delete my library?

 

For the past two builds, Dopamine has wanted to scan my library each time I start the program. It scans the music and then proceeds to update the album covers, but this process never ends. And because of that I can't delete folders from the settings option, because it keeps saying "Refreshing your collection".

Can you send me your logfile? I'd like to know what it is trying to do.

You can delete Dopamine.db. You can find it in folder %appdata%\dopamine

 

1 hour ago, Jub Fequois said:

I think you most definitely should keep it. I, personally, much prefer a warning dialogue—and actually think it's a good idea—over losing such an important feature.

I decided to keep it. There is a warning popup now since a few builds.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!