Recommended Posts

With 11 more CRS Round 1 Dragon 1 flights, at least 6 CRS Round 2 Dragon 2's and at least 6 post-certification Crew Dragons (+ 2 certification flights), and god knows how many Red Dragon missions, that new Dragon Hatchery facility is gonna be hopping.

 


Jan. 3, 2017

Mission Awards Secure Commercial Crew Transportation for Coming Years

NASA took another big step to ensure reliable crew transportation to the International Space Station into the next decade. The agencys Commercial Crew Program has awarded an additional four crew rotation missions each to commercial partners, Boeing and SpaceX, to carry astronauts to and from the International Space Station.

The four additional missions will fly following NASA certification. They fall under the current Commercial Crew Transportation Capability contracts, and bring the total number of missions awarded to each provider to six.

The additional flights will allow the commercial partners to plan for all aspects of these missions while fulfilling space station transportation needs. The awards do not include payments at this time.

"Awarding these missions now will provide greater stability for the future space station crew rotation schedule, as well as reduce schedule and financial uncertainty for our providers," said Phil McAlister, director, NASAs Commercial Spaceflight Development Division. The ability to turn on missions as needed to meet the needs of the space station program is an important aspect of the Commercial Crew Program.

The two commercial spacecraft also will provide a lifeboat capability to allow the astronauts aboard the station to return safely to Earth in an emergency, if necessary.

Returning human launch capabilities to U.S. soil underscores NASAs commitment to the station and the research that the orbiting laboratory makes possible including the advancement of scientific knowledge off the Earth, for the benefit of those on the Earth and to prepare for future deep space exploration.

The Commercial Crew Program will help NASA get full operational use from the national laboratory for scientific research by increasing the number of astronauts on the space station, and allowing the crew members to dedicate more time to research.

The commercial crew vehicles will transport up to four astronauts for NASA missions, along with about 220 pounds of critical cargo to the space station.

More time dedicated for research allows NASA to better understand the challenges of long-duration human spaceflight without leaving low-Earth orbit. As NASA develops the Orion spacecraft and the Space Launch System rocket for deep space missions, including the journey to Mars, NASA is turning over low-Earth orbit crew and cargo transportation to commercial companies. This two-pronged approach is critical to achieve the agencys exploration goals.

Boeings uncrewed flight test, known as an Orbital Flight Test, is currently scheduled for June 2018 and its crewed flight test currently is planned for August 2018. SpaceXs uncrewed flight test, or Demonstration Mission 1, is currently scheduled for November 2017, followed by its first crew flight test in May 2018.  Once the flight tests are complete and NASA certifies the providers for flight, the post-certification missions to the space station can begin.

Boeing and SpaceX are developing two unique human space transportation systems. They also are upgrading necessary infrastructure, including launch pads, processing facilities, control centers and firing rooms.

Boeing is developing the CST-100 Starliner that will launch on a United Launch Alliance Atlas V rocket from Space Launch Complex 41 at Cape Canaveral Air Force Station. SpaceX is developing the Crew Dragon to launch on the companys Falcon 9 rocket from Launch Pad 39A at the agencys Kennedy Space Center. Both are located on Floridas Space Coast.

Last Updated: Jan. 3, 2017

  • Like 1

I just, in the matter of the last two weeks found out we haven't been able to get through the Van allen belts https://www.nasa.gov/content/goddard/van-allen-probes-spot-impenetrable-barrier-in-space 

 

they have been said to disrupt Computer systems and are heavily radioactive and harmful to humans. is it possible for man to get through these?

 

 

So the Van Allan belts is a barrier for the ultra-fast electrons. Not Physical items. Otherwise we wouldnt have asteroids and the Satellites that have recently visited Pluto/Jupiter.

 

The video is a bit of over exaggeration an the comments not really relevant. There is a lot of radiation that astronauts are subjected to and the goal is to shield than from this, however the radiation will not instantly kill you, similar to nuclear radiation it affected the body over time. So the goal would be to protect the astronauts as much as possible from the radiation that we know will be there. 

 

As for the computer systems, due to all of the new technologies going into Orion and newer satellite a lot of the components have never been tested with the specific type and amount of radiation they may be exposed to. So it "may" cause issues however we are unsure. The comments in the video talking abut Apollo are not really relevant due to the outdated technology that was used back then compared to now.

Yeah, a little overblown. Manned spacecraft passed through this "barrier" twice on every Apollo mission, and communication satellites and deep space & interplanetary probes do likewise.

 

Do the computers need radiation hardening or, like SpaceX does, multi-level redundancy with voting logic? Absolutely!! 3 voting processors in each computer, 3 voting computers in each control system. Or more. They believe in overkill. 

 

 

And there are sections of the belts that are a lot thinner and much less harmful than the "full monty" parts. During Apollo/Saturn, TLI and TEI trajectories were plotted in such a way where spacecraft spent as little time as possible in the VAB region(s) -- they plot through the thinnest and least active of these areas to minimize the exposure. That, in conjunction with how the CM was designed, helped a great deal.

 

image-of-Apollo-11-and-van-allen-belts.g

So there we go. The Van Allen Belts are manageable, so far as spaceflight is concerned.

  • 2 weeks later...

 

NASA: 17 Commercial Crew Things to Track in 2017 
By Steven Siceloff,
NASA's Kennedy Space Center, Florida

 

Throughout 2017, NASA and its commercial crew partners, Boeing and SpaceX, will make major steps touching every area of space system development and operations, from completing flight-worthy spacecraft and rockets to putting the finishing touches on launch pads to performing detailed countdown and flight rehearsals.

 

Here is a look at 17 things you should track for in 2017:

 

1.    Structural Test Article: Boeing begins 2017 with its CST-100 Starliner Structural Test Article at the company’s Huntington Beach, California, facility for testing that will push, pull and apply pressure to the spacecraft, qualifying that the design will be able to withstand the intense conditions encountered during spaceflights.

 

2.    Structural Qualification: SpaceX is on pace to complete structural qualification of the Crew Dragon capsule and trunk in early 2017. The company built the Crew Dragon Qualification Vehicle to prove its design will hold up to the rigors of spaceflight.

 

3.    Starliner Prototype: Boeing will wrap up assembly of its Starliner prototype, Spacecraft 1, which is slated to go through ground verification testing before flying in a pad abort test from White Sands, New Mexico. Production of two additional Starliners will ramp up in 2017 in preparation for two test flights – first without a crew to the International Space Station and then with one Boeing and one NASA astronaut on board. All three spacecraft are being manufactured in the Commercial Crew and Cargo Processing Facility at NASA's Kennedy Space Center in Florida.

 

4.    Complete Manufacturing: SpaceX also will complete manufacturing of three Crew Dragons that are currently in early phases of assembly. These spacecraft will perform Demonstration Mission 1, flight test without crew, Demonstration Mission 2, flight test with a crew aboard, and the company’s first crew rotation mission.

 

5.    Software Systems: Both companies' robust autonomous software systems will continue to be put to the test to ensure everything works exactly as planned throughout all phases of the mission.

 

6.    Starliner Thrusters: The Starliner thrusters – from small maneuvering jets to large engines that would fire in an emergency to push the spacecraft and astronauts out of danger – will be qualified and acceptance tested in the fall during the service module hot fire test.

 

7.    Draco and SuperDraco: The Draco and SuperDraco thrusters for SpaceX's Crew Dragon are on pace to complete static-fire qualification testing in the first few months of 2017. SpaceX produces both thrusters in-house. The smaller Draco thrusters maneuver the spacecraft while it's in orbit and provide small adjustments. The SuperDracos, which are 3D printed, are much larger and produce enough thrust to lift the Crew Dragon out of danger in case of an abort situation. The company expects to complete propulsion system validation testing by demonstrating capability in all phases of flight using a dedicated module by the second half of 2017.

 

8.    Parachute Tests: Boeing will start off 2017 with its parachute qualification test series in New Mexico and more advanced drop testing at NASA’s Langley Research Center in Virginia. Boeing plans to place an instrument-laden human-like test dummy inside its mockup for drop tests that will verify that the Starliner's airbags will absorb enough of the force of landing to keep astronauts safe. The landing tests will be performed using a gantry that drops the mockup onto a dirt pad.

 

9.    Parachute Development: SpaceX plans to finish development testing of its Crew Dragon parachute systems in early 2017. The Crew Dragon will use a four-parachute configuration for landing in the water. The company plans to complete qualification testing of the parachutes after the summer.

 

10.    Spacesuits: Boeing and SpaceX each designed their own spacesuits for flight, based on the systems of their respective spacecraft and NASA’s stringent requirements. Throughout 2017, both companies will subject their suits to rigorous testing in multiple circumstances that might be encountered in space. SpaceX has completed spacesuit development testing and will build the training and flight suits for its crewed demonstration flight and first crew rotation mission after astronauts are assigned to missions. The spacesuits are not designed for spacewalking, but are meant to fill the role of the orange partial-pressure suits astronauts wore during space shuttle launches and returns. They are meant to keep air flowing to the astronaut in case of depressurization and meet a host of special capabilities.

 

11.    Starliner Factory: Boeing will add to its Starliner manufacturing complex at Kennedy early in 2017 when it opens a Hazardous Processing Facility that will allow for the safe fueling of Starliner spacecraft with maneuvering system propellants before the spacecraft is taken to the launch pad for liftoff.

 

12.    Crew Access Tower: Work is nearing completion on a new structure built specifically for the needs of astronauts climbing into Boeing's Starliner as it stands atop a United Launch Alliance Atlas V rocket at Space Launch Complex 41 in Florida. In 2017, the 200-foot-tall Crew Access Tower and Crew Access Arm will see installation and testing of emergency escape systems. ULA's complex is one of the most active on the Space Coast, and construction of the systems needed to support crew launches has taken place between launches.

 

13.    Launch Complex 39A: SpaceX has overhauled the historic Launch Pad 39A at Kennedy and built new support structures for the company's line of Falcon rockets. The Crew Access Arm, currently under construction, will be connected in the spring to provide a bridge from the fixed service structure to the Crew Dragon spacecraft so astronauts can board before launch. The launch pad will be put to the test when SpaceX launches its Falcon 9 from the pad in early 2017. It will mark the first flight off of Pad 39A since the final space shuttle mission in 2011.

 

14.    Atlas V Production: United Launch Alliance will continue production of the two Atlas V rockets that will lift Starliners into orbit on flight tests with and without crews aboard. Building its rockets at a plant in Decatur, Alabama, the company will begin building the boosters for operational Starliner missions, as well.

 

15.    Falcon 9 Production: SpaceX will build up the Falcon 9 rockets that will launch Crew Dragons into orbit for the flight tests of its systems. SpaceX builds its rockets, Merlin engines and Crew Dragon spacecraft at the company's factory and headquarters in Hawthorne, California.

 

16.    Flight Test: SpaceX is slated to make its first flight test – without a crew – in November 2017. Flying to the space station using its automated guidance and navigation systems, the Crew Dragon will dock there on its own and remain for a time before detaching and parachuting back to Earth and landing in the Atlantic Ocean off the coast of Cape Canaveral. The mission will be a dress rehearsal for a later flight test that will include astronauts.

 

17.    Space Station: The advances are not limited to Earth, either. Astronauts on the International Space Station will continue modifications in 2017 tailored for new vehicles, including commercial crew spacecraft.

  • Like 2

Thanks for the update Doc. That update does sound very political trying to make it look like both are working to the same time frame. But the most telling thing is point 16, as there is not one for Starliner. But im excited to see both of them launch, hopefully they are on time or early, not delayed. 

 

Now I could go for some social commentary.

 

  • Like 2

Actually, I am impressed, that through under funding, feature creep and bureaucracy, that SpaceX has not "blown a forehead blood vessel".

 

:D 

  • Like 2

Not to mention ULA dragging the entire Program behind several years just maintain the appearance of staying relevant to it. SpaceX won this one by several miles.

 

[EDIT] In fact, SpaceX outright "skunked" them by letting it go this long ... the Aerospace equivalent of the -- drumroll -- PARTICIPATION TROPHY. *guffaw*

Edited by Unobscured Vision
  • Like 1

Boeing hurt themselves by waiting until they got a contract before cutting metal, which means paper and inventory milestones until early last year.

 

OTOH, SpaceX has been flying and refining Dragon since 2010 and started testing the SuperDraco escape/landing thrusters in 2012.

  • Like 2
  • 4 weeks later...

As much NASA not doing certifications in a timely manner as anything, 6 months instead of the contractual 2 months, and adding requirements & functions on the fly. Add those to the issues both providers have inevitably run into and here we are.

  • Like 2

Yep. As much as I'm gung-ho for safety and reliability, this is truly getting ridiculous now. NASA can't spare the people needed to do the inspections and certs?? Should take a few weeks per Provider, maximum. And being NASA, they'll have checklists. LOTS of them. If something isn't up to par, tally it up at the end and give 'em three months to address it.

 

They wouldn't like me if was NASA Administrator ... :rofl:

 

"And knock off the feature creep. We're looking at you, Managers. You've already delayed things by two years, by my count. Don't force Administration to "drain the swamp" inside your offices too, because that can be arranged. Do your ####### jobs like you've got a purpose. NO EXCUSES. Arrange for those Certification Inspections and get this #### done already."

 

Might not be PC, and certainly not NASA-PC, but threaten their cushy jobs and they'll actually move their rear ends. Instead of having "Focus Groups" and burning up coffee makers.

 

Maybe I'd even pull surprise visits on-site with the REAL people who know what's going on ... you know, the ones doing the work? I'd rather deal with them anyway. Get accurate status reports, and more importantly you find out what they need in order to finish the job in a reasonable amount of time .. and not have to listen to some Company Rep who blows glitter and unicorns and basically lies to ya the whole time other than the fact it's actually in-work.

 

Oh ... hehe ... and our guy Marty and the Wonder Workers? They'd be offered positions to help get things back on-track. I'd make Marty an offer he couldn't refuse ... :D 

  • Like 1
7 hours ago, Unobscured Vision said:

Tell 'em, Gwynne. :yes:

She is a diamond ...... one of the best hires that SpaceX made...

 

note..Elon made a twitter account for her, but she doesn't like to tweet...

 

https://twitter.com/gwynneshotwell?lang=en

 

 

  • Like 1

Considering one of those block 5's will be the un-crewed Crew Dragon mission, that's 6 before late 2018. No sweat.

 

And the whole idea of SLS flying an Orion crew early makes the above even more ridiculous. Especially given all the mission critical items on Orion which aren't near ready yet.

  • Like 2

Also heard that a few booster segments have flaws and require recasting, with additional expense. The ESA module which was due last month won't arrive till summer...but everything is fine with SLS.

 

I am beginning to think that some believe this silliness. Once FH flies...going to be tough to justify cost/lift mass.

 

edit...just found some of the references...

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This has gotten a bit out of control. Must be a "last ditch" to keep SLS going...this is really out of character.

 

At the rate NewSpace is plugging along...some questions will be answered sooner than a few want them answered.

 

:s

4 hours ago, Draggendrop said:

 

 

 

Exactly....

Not just SLS/Orion... Just how many Apollo/Saturn 5's of the same configuration did NASA launch before they started putting people in them, hmm?

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      222
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!