Recommended Posts

Not sure, but the above issue that the Advisory Board has is related to that and the reaction the supercooled fuel has on the COPV's -- and they want SpaceX to redesign them with guidance from NASA; which, knowing how NASA Engineers/Management do their DCR (Design Certification Review) process to sign off on new/modified hardware it'd take years. 

 

A COPV isn't just something that can be swapped out. It essentially requires a complete disassembly of the rocket in order to get to the fuel tank(s), then you gotta rip apart the fuel tank(s) in order to get to the COPV's themselves. Once you remove the COPV's you can not use the fuel tank(s) again, because they're damaged beyond repair. Can't use those COPV's again either. Short story, and in plain english, the COPV's are for all purposes bonded to those tanks. Removing them means you destroy the tanks and the COPV's alike.

 

Every single rocket that SpaceX has produced the Advisory Board would like disassembled and the fuel tanks destroyed so that the COPV's can be swapped with a "better design" (as they call it) -- ALL SO IT CAN BE HUMAN-RATED.

 

This will take SpaceX years and cost them BILLIONS

 

Unacceptable, and completely arbitrary. It skews the playing field entirely into OldSpace's favor -- but that was the intention the whole time.

 

So now humans are forced to ride uphill on rockets that are either barely able to do the job (Atlas V) or rockets that are just as likely to explode as they are to send them to Mars and cost billions for each trip uphill (SLS). And OldSpace still wins.

Swapping may be easier than that. There's an access port into the tanks, and the COPV's are connected to the tank by jointed struts (remember CRS-7?) so swapping them out should be simpler.  

 

The plan is if COPV 2.0 doesn't make the ASAP grade they fall back to much heavier metallic tanks. This would cost some payload mass, but Falcon 9 is in the Proton performance class so it shouldn't be that big a hit.

I wonder what would happen at this stage if SpaceX said no.

 

NASA has already stated that they need 2 providers and they are willing to spend the money to have 2 providers. Which means they need 2 rockets, currently they have 1 and a half, with Falcon 9 and a soon to be dead Atlas. If they state that Falcon 9 is not good enough and SpaceX refuse to change it, what would they do.

 

(this is all hypothetical as they wont but....)

 

 

This is where NASA decides if they listen to the ASAP advisory board ot do what it so often has done: all but ignore them. 

 

They're going to fly on Orion with its development  problems, and are already flying on Soyuz with all of Russia's recent quality and historic equipment failures. 

 

 

 

Edited by DocM
  • Like 1

Yeah. Academia is seriously questioning NASA's logic with this program in general. It was supposed to be driven by efficiency and "new standards", not by NASA's (or some arbitrary "Advisory Committee" staffed by NASA people) quadruple-redundant and overblown 1970's standards ... and whose standards still weren't anything but "the long way 'round" to get to the same place that Commercial programs could do in 1/10th of the time and for way less cost.

 

Nah ... we're starting to call NASA & contractors out on its' B.S. as a matter of principle in technical reviews and other materials that they're attempting to submit at the research, historical & catalog level. Some of what we're seeing during peer review could be considered ridicule and political dogma -- yes, BIAS -- that favors one company's approach & methodology over another, and/or considers innovation "inappropriate" because those innovations aren't theirs/better/cheaper/whatever. We've caught SpaceX doing this too a little bit, but nothing like Lockheed-Martin and Boeing tend to do. ULA, to their credit, tend to submit very clean stuff although we've noted that in peer review some of their materials appear to be a little ... passionless.

 

(And forgive me, folks, for mentioning the above. A bit off-topic, yes, but pertinent. Stay with me because it'll be relevant to the discussion in a moment.)

 

For anyone who doesn't know, the whole reason that the companies submit the above "stuff" to Universities (technical reviews, historical reports, research & development notes, new breakthroughs that Universities might want to R&D, etc) from time to time is so that they can be peer reviewed. Think of it this way -- you don't want ULA peer reviewing SpaceX's development milestones, right? Universities have unspoken & firm-standing NDA's with everyone -- it's part of Ethics & Practices -- and are considered "holy ground" by all. SpaceX or ULA (for example) can come to appropriately-staffed Universities with Professors and Students who will peer-review anything brought before us. That's a service that Universities provide, for free, because it gives the Students the training on how to handle such materials, the Professors something to teach the Students with, and the Universities the "Industry trust". We might even do the research for them if it's interesting enough. Win-win-win-win, and Deans love it when we complete research for Industry because that means it's a patent that the University gets to cash in on.

 

The deal is that it can be a "three-edged sword", to quote Babylon 5. The companies that get their stuff peer reviewed can and will get papercuts if they aren't playing by the rules -- and generally speaking, we WILL call 'em out on it if they aren't coming to us correctly. Bias is one problem. Cannot have it, at all. Politics and agendas are a no-no too. There's no room for that in Academia.

 

SO ... how does this relate to SpaceX's current problem with the Advisory Board and NASA's logic problem?

 

NASA is micromanaging everything, like usual, and turning this program into another one of IT'S programs. Fully and completely flying in the face of what it was supposed to be doing (which was "get the hell out of the way and let the Companies do what they're gonna do").

 

Now things are beyond the point where SpaceX or LockMart/Boeing/ULA can pull out; which is what they should have done if they'd have known it was gonna turn into this.

 

I agree with the call SpaceX is making. Fly Dragon 2 anyway. Any problems that arise they'll sort out in short order.

  • 4 weeks later...

Wow....sounds like someone from above (NSC? VP Pence?) told NASA, ASAP etc. to chill on the delays.

 

Space News....

 

Quote

NASA studying commercial crew contingency plans

 

WASHINGTON  NASA is beginning to study a contingency option for maintaining access to the International Space Station should commercial crew vehicle development experience delays, one that would turn test flights of those vehicles into operational missions.

Speaking at the Federal Aviation Administration Commercial Space Transportation Conference here Feb. 8, Bill Gerstenmaier, NASA associate administrator for human exploration and operations, said using the planned crewed test flights as crew rotation missions was one option under consideration should neither Boeing nor SpaceX be certified for regular crew rotation missions by the fall of 2019, when NASAs access to Russian Soyuz spacecraft ends.

"Those test flights might be able to be extended a little bit, fly a little bit longer, maybe fly a little bit of crew, and they could be kind of an operational mission," he said in response to a question after a luncheon speech at the conference. "Thats something were beginning to discuss with both SpaceX and with Boeing."
>

 

  • Like 2

I'm far more comfortable with SpaceX's vehicle than Boeing's in that scenario. It's quite more feature-complete -- and would already be flying those missions if not for the "delays".

 

And I'm still not sold on ULA's plan in closing those "Black Zones" in the flight profile, either. I probably never will be as long as they're using an Atlas V.

4 hours ago, DocM said:

The Centaur upper stage lifting Starliner while having a stainless steel skin thinner than a beer can does seem to be a black hole of a black zone, doesn't it?

Talk about an underperformer of an engine ... sheesh. A lactose-intolerant human drinking milkshakes puts out more thrust than those units. :laugh:

  • 1 month later...

Uuuuuughhh ... that radiator mounting change (and associated plumbing) would require an almost complete lower internal disassembly (at best) to modify. Figures it'd be something requiring six months to do start-to-finish.

 

Anything to trip SpaceX up huh ... pricks. Once the design is finalized Boeing & Co. know they've lost the farm so any and all dirty tricks, shenanigans, lackeys and tools-of-ill-repute are being employed now.

 

Sheesh.

  • 2 weeks later...

Check this out. Absolutely disgusting how this crap is being allowed to take place. Double standard much?

 

NASA studies extending Boeing commercial crew test flight to support ISS

Article link | SpaceNews.com website

Quote

WASHINGTON — A commercial crew contract modification moves NASA one step closer to using a test flight as an operational mission to maintain a presence on the International Space Station.

 

NASA announced April 5 that it had updated its Commercial Crew Transportation Capability (CCtCap) contract with Boeing to study potential changes to the second of two test flights of the company’s CST-100 Starliner vehicle, currently intended to carry two people on a short-duration mission to the station.

 

Those changes, NASA said, would involve adding a third crewmember to flight and extending its mission from two weeks to as long as six months, the typical length of an astronaut’s stay on the ISS. The changes would involve training and mission support for that third crewmember and the potential to fly cargo on both that mission and an earlier uncrewed test flight.

(....)

In the statement, NASA said that it was approached by Boeing last year about the contract change. SpaceX’s CCtCap contract is not affected by the change. “If SpaceX submits a proposal for their crewed flight demonstration, the agency will review it through the normal procurement process,” NASA spokesperson Cheryl Warner said April 6.

 

.... of course SpaceX's contract isn't affected. Multiverse forbid that there be a level playing field.

 

/sigh ... just when it looked like things were finally changing.

Tbh... I do not see anything shocking here. Because right after the piece you emphasized it says "If SpaceX submits a proposal for their crewed flight demonstration, the agency will review it through the normal procurement process,". Which seems to me like the same thing Boeing did and got into the works.

Which could take 6-12 months.

 

I think the best course of action for SpaceX to take is to accelerate their efforts on Dragon 2, push NASA for earlier dates on Certification/Review milestones whenever SpaceX is ready for them (to avoid waiting needlessly for those inspection dates, chewing up more time that could be used fixing anything that crops up) and try to beat that 2020 deadline. At this point Boeing wins simply by attrition when before they were behind by YEARS.

 

I don't find this at all happening by coincidence or happenstance. None of it.

 

SpaceX should have had this launched by 2016-2017; and it's been by one dirty run of interference or another that it hasn't happened yet. I promise you. Foul games are afoot.

I think SpaceX should release details about the process. Every time they put anything into review, update a website with that detail, so that everybody can see how long it is taking NASA to "review" their milestones, this will put pressure on NASA as people outside of the process will see that SpaceX is waiting on them. Which has been a lot of the issues, from what I have read.

  • Like 2
  • 1 month later...

Yep. SpaceX, as usual, delivering what is promised -- OldSpace, as usual, delivering the narcolepsy. Can't be bothered to dream a little.

 

Haven't heard of anybody who wants to fly on Orion or Starliner. Everyone wants Dragon 2 or BFS. OldSpace isn't doing anything to attract newcomers in the Apprenticeship or Internship programs either. Big signing bonuses? Feh ... nobody wants to work there because there are literally NO projects of interest going on in ULA, Boeing or LockMart unless your thing is Military hardware. Even the Satellite industry is shifting massively towards the Commercial and Civilian sectors (SpaceX's Starlink, Iridium, etc) because that's where the growth is.

 

SpaceX, Blue, and other NewSpace ventures (as well as Industry Partners) are hiring and recruiting like there's no tomorrow right now. If you've got any kind of Engineering or Physics degree that's compatible with AeroSpace you can almost name your salary and get hired in. THAT'S how badly the skills are needed.

 

Labor? SpaceX needs that too, in all areas. BFS/BFR won't build itself -- but you'd better be the best of the best at what you do, and be able to prove it. 

 

It's a really heady time right now for AeroSpace. Wide open. :jump:

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Anthropic introduces Claude Tag, a new AI teammate for Slack by Fiza Ali Anthropic has announced Claude Tag, a new feature that lets teams work with Claude directly inside Slack. The idea is simple: once Claude is added to a Slack workspace and given access to selected channels, users can tag @Claude in conversations and assign tasks. Claude can then work through those requests using connected tools and data sources before posting its results back into a Slack thread. What makes Claude Tag different from a typical chatbot is that it's designed to operate as a shared assistant for an entire team rather than a single user. Everyone in a channel interacts with the same Claude instance. This allows the team members to see ongoing work and continue tasks started by others. Furthermore, Anthropic says the AI can build context over time by following conversations in channels where it has permission to operate. This means users don't have to repeatedly provide the same background information for every request. The system is also designed for asynchronous work. Instead of waiting for responses in a chat window, users can assign a task to Claude and return later once the work is complete. Anthropic says Claude can break larger requests into multiple steps and use connected tools to complete them. Moreover, the system can also schedule follow-up tasks and continue working on projects over extended periods. Another feature allows Claude to keep the users updated and follow up on unresolved tasks when its optional "ambient" mode is enabled. The company says the tool is already being used internally for software development, data analysis, support workflows, and debugging. According to Anthropic, around 65% of its product team's code is now generated through its internal version of Claude Tag. For organisations concerned about security, administrators can control which channels, tools, and data sources Claude can access. Separate Claude instances can also be configured for different departments, helping keep information isolated between teams. Administrators can also monitor activity logs, review completed tasks, and set spending limits at both the organisation and channel level. Claude Tag is now available in beta for Claude Enterprise and Claude Team customers and runs on Claude Opus 4.8 that was announced this May. The feature will also replace Anthropic's existing Claude in Slack application, with current users able to migrate within a 30-day migration window. Lastly, eligible customers will receive introductory credits to help teams evaluate the new experience.
    • Beats Studio Pro wireless over-ear ANC headphones drop to their lowest price yet by Fiza Ali Amazon is currently offering the Beats Studio Pro headphones at their all-time low price. The Studio Pro use 40mm active drivers which are designed to improve clarity and reduce distortion compared to previous models, with up to an 80% improvement over the Beats Studio3 Wireless. A built-in digital processor adjusts frequency response to keep the sound balanced rather than overly boosted in any one area. They also include Active Noise Cancelling that adapts to your surroundings to reduce background noise along with a Transparency mode that lets outside sound in when you need awareness of what’s going on around you. Furthermore, the headphones support personalised Spatial Audio with dynamic head tracking as well as Dolby Atmos playback on supported content. Moreover, built-in voice-targeting microphones improve call quality. You can also switch between three sound profiles including Beats Signature for balanced music playback, Entertainment for films and gaming, and Conversation for clearer voice in calls and podcasts. Physically, they are designed to be worn for long periods without feeling heavy or awkward. The ear cushions use UltraPlush engineered leather while metal sliders allow you to adjust the fit. On the connectivity side, the Studio Pro use Class 1 Bluetooth for a stable, long-range wireless connection. There is also a 3.5mm input if you want to plug in directly, including use with in-flight entertainment systems. Controls are located on the headphones and include a "b" button for music and call control, a volume rocker, and a multifunction button used for switching listening modes, EQ settings, power, and pairing. In addition, the headphones offer integration with both Apple and Android devices. On Apple devices, they support one-touch pairing with iCloud-linked devices, hands-free Siri access, Find My tracking based on last connected location, and automatic software updates. On Android devices, they support Google Fast Pair, Audio Switch between compatible devices, and Google Find My Device tracking, with additional features available through the Beats app. When it comes to the battery performance, it is rated at up to 40 hours of listening time with ANC turned off, and up to 24 hours with ANC or Transparency mode enabled. A 10-minute Fast Fuel charge should provide up to 4 hours of playback. Finally, the headphones use a rechargeable lithium-ion battery and charge via USB-C. Beats Studio Pro Wireless Over-Ear ANC Headphones: $149.95 (Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      81
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!