Recommended Posts

If that is the case then  yeah I would expect bad things to happen.

 

FAA certification only goes to 150% .I know the FAA doesn't have jurisdiction here, but is NASA requiring 200%?  Is this for that ###### LOC rate they require? 

 

4 hours ago, Skiver said:

Still no news on this? I'm so used to SpaceX's quick and open explanations on some of the "failures" they've had in the past, the lack of information on this makes it feel worse than it probably is.

Government is involved.  Could be why it's taking longer?

SpaceX's Hans Koenigsmann re: Crew Dragon test failure. Sounds like plumbing.

Powered up nominally.

Completed 2 Draco thruster firings, 5 seconds each. 

Just before the SDs fired there was an anomaly which destroyed the vehicle.

Indications this happened while the SDs were "activating". Too soon to speculate about root cause.

COPVs are not pressurized during SD activation

Confidence in SDs - 600 tests including integrated;  pad abort and hovers.

Large amount of data; high speed film, sensors and telemetry. 

 

Video does not include the Q&A

 

Edited by DocM
9 hours ago, Skiver said:

Still no news on this? I'm so used to SpaceX's quick and open explanations on some of the "failures" they've had in the past, the lack of information on this makes it feel worse than it probably is.

Well....when the Falcon blew up on the launch pad it took about three weeks before a lengthy statement (aside from ones apologizing for loss of the AMOS-6) and preliminary speculation on the cause.  About 4 months before everything was done...with updates about every month.

 

I wouldn't read too much into them not giving out information at this point.  

 

Just hoping it isn't a design flaw...but we'll know eventually.

  • Like 2

From the above article...

Quote

///

In the company's most expansive comments to date, Koenigsmann said the "anomaly" occurred during a series of tests with the spacecraft, approximately one-half second before the firing of the SuperDraco thrusters. At that point, he said, "There was an anomaly and the vehicle was destroyed."

 

During the activation phase, the SuperDraco thruster system is pressurized, and valves are opened and closed. Since the accident there has been speculation that there may have been some issue with the composite overwrap pressure vessels, or COPVs, which store rocket fuels at extremely high pressures. The COPVs on Crew Dragon are different from those on the Falcon 9, and they would not have been overly stressed at that moment, Koenigsmann said. "I'm fairly confident that the COPVs are going to be fine," he said.

///

He also went on to say that  "We have no reason to believe there’s an issue with the SuperDracos themselves,"

  • 4 weeks later...
  • 4 weeks later...
  • 4 weeks later...

WRT the Crew Dragon explosion

 

https://twitter.com/SpaceflightIns/status/1150825006663897088

 

SpaceFlight Insider @SpaceflightIns
SpaceX has a teleconference set for later today. Most agencies / companies give a couple days notice @SpaceX gave less than 3 hours. Topic is explosion of their @CommercialCrew offering @CrewDragon2

 

SpaceX press release

 


On Saturday, April 20, 2019 at 18:13 UTC, SpaceX conducted a series of static fire engine tests of the Crew Dragon In-Flight Abort test vehicle on a test stand at SpaceXs Landing Zone 1, Cape Canaveral Air Force Station in Florida.

Crew Dragons design includes two distinct propulsion systems  a low-pressure bi-propellant propulsion system with sixteen Draco thrusters for on-orbit maneuvering, and a high-pressure bi-propellant propulsion system with eight SuperDraco thrusters for use only in the event of a launch escape. After the vehicles successful demonstration mission to and from the International Space Station in March 2019, SpaceX performed additional tests of the vehicles propulsion systems to ensure functionality and detect any system-level issues prior to a planned In-Flight Abort test.

The initial tests of twelve Draco thrusters on the vehicle completed successfully, but the initiation of the final test of eight SuperDraco thrusters resulted in destruction of the vehicle. In accordance with pre-established safety protocols, the test area was clear and the team monitored winds and other factors to ensure public health and safety.

Following the anomaly, SpaceX convened an Accident Investigation Team that included officials from the National Aeronautics and Space Administration (NASA), and observers from the Federal Aviation Administration (FAA) and the National Transportation Safety Board (NTSB), and began the systematic work on a comprehensive fault tree to determine probable cause. SpaceX also worked closely with the U.S. Air Force (USAF) to secure the test site, and collect and clean debris as part of the investigation. The site was operational prior to SpaceXs Falcon Heavy launch of STP-2 and landing of two first stage side boosters at Landing Zones 1 and 2 on June 25, 2019.

Initial data reviews indicated that the anomaly occurred approximately 100 milliseconds prior to ignition of Crew Dragons eight SuperDraco thrusters and during pressurization of the vehicles propulsion systems. Evidence shows that a leaking component allowed liquid oxidizer  nitrogen tetroxide (NTO) to enter high-pressure helium tubes during ground processing. A slug of this NTO was driven through a helium check valve at high speed during rapid initialization of the launch escape system, resulting in structural failure within the check valve. The failure of the titanium component in a high-pressure NTO environment was sufficient to cause ignition of the check valve and led to an explosion.

In order to understand the exact scenario, and characterize the flammability of the check valves titanium internal components and NTO, as well as other material used within the system, the accident investigation team performed a series of tests at SpaceXs rocket development facility in McGregor, Texas. Debris collected from the test site in Florida, which identified burning within the check valve, informed the tests in Texas. Additionally, the SuperDraco thrusters recovered from the test site remained intact, underscoring their reliability.

It is worth noting that the reaction between titanium and NTO at high pressure was not expected. Titanium has been used safely over many decades and on many spacecraft from all around the world. Even so, the static fire test and anomaly provided a wealth of data. Lessons learned from the test  and others in our comprehensive test campaign  will lead to further improvements in the safety and reliability of SpaceXs flight vehicles.

SpaceX has already initiated several actions, such as eliminating any flow path within the launch escape system for liquid propellant to enter the gaseous pressurization system. Instead of check valves, which typically allow liquid to flow in only one direction, burst disks, which seal completely until opened by high pressure, will mitigate the risk entirely. Thorough testing and analysis of these mitigations has already begun in close coordination with NASA, and will be completed well in advance of future flights.

With multiple Crew Dragon vehicles in various stages of production and testing, SpaceX has shifted the spacecraft assignments forward to stay on track for Commercial Crew Program flights. The Crew Dragon spacecraft originally assigned to SpaceXs second demonstration mission to the International Space Station (Demo-2) will carry out the companys In-Flight Abort test, and the spacecraft originally assigned to the first operational mission (Crew-1) will launch as part of Demo-2.

  • Like 2

This is why testing happens. :yes: It'll be a far safer vehicle with this new change.

 

Apollo used the "burst disk" methodology as a safety feature too on its' engines. ALL of them. I'm surprised that SpaceX hadn't employed them also; but hey -- experience becomes the best teacher and this kind of thing won't be overlooked in the future.

 

Better that this happened now rather than later. (Y) 

  • Like 3

Yep, saw this.

 

Crew Dragon does have the capability to land anywhere, but of course won't be allowed to land anywhere but water unless it's an emergency. Frankly I think ocean landings are "old school" and need to be rethought. Big waste of resources for recovery not to mention refurbishing the spacecraft (considering how much havoc seawater causes).

 

Seriously, set up a 50 x 200 mile touchdown area in the Western or Southern U.S. (or both) designated as a Recovery Area so that Commercial Crew spacecraft can land on land. I've disliked the idea that we must use the ocean since I've been a kid following space stuff. No, really -- Crew Dragon especially; those four parachutes are overkill. Touching down on land is gonna be easy peasy. Scuff the heat shield up a bit ... so what. Better than seawater.

 

/shrug

16 minutes ago, Unobscured Vision said:

Yep, saw this.

 

Crew Dragon does have the capability to land anywhere, but of course won't be allowed to land anywhere but water unless it's an emergency. Frankly I think ocean landings are "old school" and need to be rethought. Big waste of resources for recovery not to mention refurbishing the spacecraft (considering how much havoc seawater causes).

 

Seriously, set up a 50 x 200 mile touchdown area in the Western or Southern U.S. (or both) designated as a Recovery Area so that Commercial Crew spacecraft can land on land. I've disliked the idea that we must use the ocean since I've been a kid following space stuff. No, really -- Crew Dragon especially; those four parachutes are overkill. Touching down on land is gonna be easy peasy. Scuff the heat shield up a bit ... so what. Better than seawater.

 

/shrug

Boeing agrees that seawater is no good for their Starliner capsule, there are better ways to get them down :) 

 

 

https://en.wikipedia.org/wiki/Boeing_CST-100_Starliner

9 hours ago, Steven P. said:

Boeing agrees that seawater is no good for their Starliner capsule, there are better ways to get them down :) 

 

 

https://en.wikipedia.org/wiki/Boeing_CST-100_Starliner

 

Assuming the heat shield separates so the bags can inflate. If not, things get bumpy.

  • Like 1
  • Thanks 1
  • 4 weeks later...
  • 3 weeks later...
  • 3 weeks later...

The Crew Dragon In-Flight Abort test FCC permit is in.

 

Pad LC-39A

Simulated second stage

 

The start date further indicates the Starship pad mods should be done by then.

 

Start date: November 23, 2019
End date: May 23, 2020

 

Quote


Please explain in the area below why an STA is necessary:

This application uses information from previous grant, 1829-EX-ST-2019. This STA is necessary to authorize launch vehicle communications for SpaceX Mission 1357, a launch from Complex 39a, Kennedy Space Center. The application includes a sub-orbital first stage, and a simulated orbital second stage. Trajectory data shall be provided directly to NTIA, USAF, and NASA. All downrange Earth stations are receive-only. Launch licensing authority is FAA Office of Commercial Space Transportation.

  • 2 weeks later...

SpaceX now has TWO vessels capable of recovering Crew Dragon; GO Searcher and GO Navigator. 

 

And in a rather ambiguous tweet Musk simply said "A Shortfall Of Gravitas." Will it still be a droneship? "Yes" 

 

Starship capable? We'll see.

 

 

 

 

 

  • Like 1
On 10/9/2019 at 2:08 PM, DocM said:

SpaceX now has TWO vessels capable of recovering Crew Dragon; GO Searcher and GO Navigator. 

 

And in a rather ambiguous tweet Musk simply said "A Shortfall Of Gravitas." Will it still be a droneship? "Yes" 

 

Starship capable? We'll see.

 

 

 

 

 

What do you mean by "Starship capable"?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Just install Linux Mint that is a real blessing and many times cheaper because you can continue using your old Windows computer/laptop with the latest Linux updates.
    • Interesting share -- however it does not make sense: Email messages get stored somewhere, so how is Delta Chat "based on email" and decentralized without actually storing anything? By Web3 standard practices, the various Relays would require dedicated storage to make messages available to the recipients (like a large series of message queue channels, akin to racks of traditional post office boxes)... and Contacts must be two-way confirmed in order for encryption keys to be exchanged (ostensibly every key-pair is uniquely bound between sender and recipient) and the Relays would preserve the public keys in order to facilitate message carriage... or every device stores all sorts of keys and contact info. All of this to say, decentralized messaging is like running Bluesky nodes except instead of discovering/browsing public feeds by various posters (at the given node) these Delta Chats would be relaying encrypted messages (via Relays) that only trusted recipients would have the appropriate decryption key (their own private key) to read it. But this doesn't solve the "it's like email" sales pitch. The only way it's like email is that there's encrypted binary stuff being transported from your app into the federated ether of Delta Chat Relays for others to decrypt (hopefully only the intended recipient)... but outside of this federated relays framework, it is absolutely nothing like email.
    • Hasleo Backup Suite Free 5.8.2.2 by Razvan Serea Hasleo Backup Suite Free is a free Windows backup and restore software, which embeds backup, restore and cloning features, it is designed for Windows operating system users and can be used on both Windows PCs and Servers. The backup and restore feature of Hasleo Backup Suite can help you back up and restore the Windows operating systems, disks, partitions and files (folders) to protect the security of your Windows operating system and personal data. The cloning feature of Hasleo Backup Suite can help you migrate Windows to another disk, or easily upgrade a disk to an SSD or a larger capacity disk. System Backup & Restore / Disk/Partition Backup & Restore Backup Windows operating system and boot-related partitions, including user settings, drivers and applications installed in these partitions, which ensures that you can quickly restore your Windows operating system once it crashes. Viruses, power failure, or other unknown reasons may cause data loss, so it is a good habit to regularly back up the drive that stores important files, you can at least recover lost files from the backup image files in the event of a disaster. System Clone / Disk Clone / Partition Clone Migrate the Windows operating system from one disk to another SSD or larger disk without reinstalling Windows, applications and drivers. Clone entire disk to another disk and ensure that the contents of the source disk and the destination disk are exactly the same. Clone a partition completely to the specified location on the current disk or another disk and ensure that the data will not be changed. File Backup & Restore Back up specified files(folders) instead of the entire drive to another location to protect your data, so you can quickly restore files(folders) from the backup image files when needed. Incremental/Differential/Full Backup Different backup modes are supported, you can flexibly choose data protection schemes, which can improve backup performance and save storage space while ensuring data security. Delta Restore Delta restore uses advanced delta detection technology to check the changed blocks on the destination drive and restore only the changed blocks, so it has a faster restore speed than the traditional full restore. Universal Restore This feature can help us restore the Windows operating system to computers with different hardware and ensure that Windows can work normally without any hardware compatibility issues. Hasleo Backup Suite 5.8.2.2 changelog: Improved creation of bootable media that supports the UEFI CA 2023 certificate Fixed an issue that caused system restore to fail Fixed an issue where file backup could not list drives under Windows ARM64 Fixed an issue that caused backup of MacOS files/folders shared via Samba to fail Fixed an issue that caused "Smart Backup" to not work properly Fixed other minor bugs Download: Hasleo Backup Suite 5.8.2.2 | 39.7 MB (Freeware) Links: Hasleo Backup Suite Website | Hasleo Backup Suite Guide | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Shotcut 26.6.25 by Razvan Serea Shotcut is a free, open source, cross-platform video editor for Windows, Mac and Linux. Major features include support for a wide range of formats; no import required meaning native timeline editing; Blackmagic Design support for input and preview monitoring; and resolution support to 4k. Editing Features Trimming on source clip player or timeline with ripple option Append, insert, overwrite, lift, and ripple delete editing on the timeline 3-point editing Hide, mute, and lock track controls Multitrack timeline with thumbnails and waveforms Unlimited undo and redo for playlist edits including a history view Create, play, edit, save, load, encode, and stream MLT XML projects (with auto-save) Save and load trimmed clip as MLT XML file Load and play complex MLT XML file as a clip Drag-n-drop files from file manager Scrubbing and transport control Video Effects Video compositing across video tracks HTML5 (sans audio and video) as video source and filters 3-way (shadows, mids, highlights) color wheels for color correction and grading Eye dropper tool to pick neutral color for white balancing Deinterlacing Auto-rotate Fade in/out audio and fade video from and to black with easy-to-use fader controls on timeline Video wipe transitions: bar, barn door, box, clock (radial), diagonal, iris, matrix, and custom gradient image Track compositing/blending modes: Over, Add, Saturate, Multiply, Screen, Overlay, Darken, Dodge, Burn, Hard Light, Soft Light, Difference, Exclusion, HSL Hue, HSL Saturation, HSL Color, HSL Luminosity. Video Filters: Alpha Channel: Adjust, Alpha Channel: View, Blur, Brightness, Chroma Key: Advanced, Chroma Key: Simple, Contrast, Color Grading, Crop, Diffusion, Glow, Invert Colors, Key Spill: Advanced, Key Spill: Simple, Mirror, Old Film: Dust, Old Film: Grain, Old Film: Projector, Old Film: Scratches, Old Film: Technocolor, Opacity, Rotate, Rutt-Etra-Izer, Saturation, Sepia Tone, Sharpen, Size and Position, Stabilize, Text, Vignette, Wave, White Balance Speed effect for audio/video clips Hardware Support Blackmagic Design SDI and HDMI for input and preview monitoring Leap Motion for jog/shuttle control Webcam capture Audio capture to system audio card Capture (record) SDI, HDMI, webcam (V4L2), JACK audio, PulseAudio, IP stream, X11 screen, and Windows DirectShow devices Multi-core parallel image processing (when not using GPU and frame-dropping is disabled) DeckLink SDI keyer output OpenGL GPU-based image processing with 16-bit floating point linear per color component Shotcut 26.6.25 changelog highlights: Added basic support for OpenFX (OFX) video plugins. Added VST2 audio plugin support for third-party audio effects. Added Safe Mode to launch Shotcut without external plugins for easier crash recovery. Added an experimental plugin UI generator (--experimental) for supported filters and plugins. Added a new Noise Reduction audio filter powered by RNNoise. Added HDR export support. Added PQ HDR metadata options for HDR exports. Added the ability to view HDR previews in full-screen mode. Improved Vulkan display support on Linux. Fixed DeckLink and UltraStudio external monitor deadlocks. Fixed Opus audio export warnings related to frame_duration. Improved plugin discovery and compatibility for supported OpenFX and VST2 plugins. Expanded command-line options for testing experimental features. Improved overall application stability when using third-party plugins. Enhanced HDR editing and preview workflow. Included numerous bug fixes, performance optimizations, and general stability improvements throughout the application.[full release notes] Download: Shotcut 26.6.25 | Portable | ARM64 ~200.0 MB (Open Source) View: Shotcut Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I looked into a few echo devices to find they were riddled with adverts over time. No thanks ill stick to my homeassistant, smart plugs, smart bulbs and cameras that don't cost me a monthly fee and are cheaper to buy. No adverts also.
  • Recent Achievements

    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      229
    3. 3
      PsYcHoKiLLa
      163
    4. 4
      Steven P.
      76
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!