London fire: Six killed as Grenfell Tower engulfed


Recommended Posts

17 minutes ago, FloatingFatMan said:

Whilst I agree that the money has to come from somewhere, but with the governments building program, I think they really DO need to look at these old tower blocks and get rid of them.  People should not be packed into buildings like sardines.  I know there are space issues, but this just isn't good enough.  Firefighters simply can't reach above approx 10th floor with their equipment in an emergency, so anyone above that limit must either get themselves out, or are as good as dead.

My home borough (Waltham forest) has removed all their tower block housing, and this was one of the (many) reasons why.

27 minutes ago, TheReaperMan said:

I can see that point you are making and agree. You could look at it this way if the UK government had not have called a election that was not needed at this time, the money they wasted could have been used to fund this and other things.

I agree with the sentiment but unfortunately, know it will never work like that.

24 minutes ago, FloatingFatMan said:

Whilst I agree that the money has to come from somewhere, but with the governments building program, I think they really DO need to look at these old tower blocks and get rid of them.  People should not be packed into buildings like sardines.  I know there are space issues, but this just isn't good enough.  Firefighters simply can't reach above approx 10th floor with their equipment in an emergency, so anyone above that limit must either get themselves out, or are as good as dead.

2

I think this is probably the best way forward, rather than constantly putting lipstick on a pig it would be far better spending money on rebuilding these structures to something safer, to begin with.

  • Like 1
1 hour ago, TheReaperMan said:

The thing that gets me,  if part of that refit they had fitted sprinklers at a cost of about £1200 per flat this may not have happened.

Not necessarily. If the fire was spread by the external cladding (as now seems to be the case) then internal sprinklers would have done little to dampen the flames. It *may* have slowed the internal spread and bought the residents a few more minutes. However, given that they were only recently advised to stay in their flats in case of fire, those minutes might not have helped much.

 

Hopefully this is one of those tragedies that sparks sweeping changes in regulations that make us all safer.

 

Confirmed death toll now 17. Horrific.

  • Like 1
2 hours ago, Skiver said:

 if this thing had collapsed 

The jet fuel was missing.

 

According to this study here, there has been six fire-induced total collapses of multi-storey buildings in human history. Three of those happened on the same day.

 

Quote

I can't bare to even think what people have been going through to think that throwing children out of windows was the only and best choice. 

Same.

  • Like 1
1 minute ago, Mirumir said:

The jet fuel was missing.

 

According to this study here, there has been six fire-induced total collapses of multi-storey buildings in human history. Three of those happened on the same day.

I partially disagree, as fires do weaken structures regardless of the 'jet fuel' wildcard. I do agree that the trade center would have stood longer had it not been for the increased temperature stress contributed by the jet fuel, but as this is a 'high rise' block of flats (apartments) I do (uneducated guess) believe that the structure will be too compromised for habitation, and will need to be demolished without the added 'wildcard' 

 

 

 

Update 12:10pm a fire has broken out again

It's pretty certain that the cheap plastic cladding they used in the "renovation" has been a contributing factor in the fire taking such a hold, apparently there are 2 types of cladding, plastic based and mineral based, the mineral is much more durable, more fireproof but, of course, more expensive. So they've gone for the cheap option and people have paid for it with their lives.

 

Love the way Theresa May visited, spoke only to the official and fire staff and completely ignored the people who actually live there, Jeremy Corbyn just turned up and went straight to the people involved. That just speaks volumes.

  • Like 1

The building will be demolished, no doubt about it. The outer edges of the floors are too unsafe for even a search attempt. Besides, who would want to live in a building that has been so utterly ravished by fire and in which so many people perished to horribly?

  • Like 1
11 minutes ago, techbeck said:

I guess 17 dead and no more expected to be found alive.  People are posting the fire started again tho I just read it was out.  But either way, the building will probably need to be torn down.

I am currently watching it on BBC news channel, when I posted it was being reported... Right now (12:45pm UK time) it looks like the fires are out, and some small smouldering smoke can be seen

I hate myself for thinking like this, but a part of me is questioning if it was indeed a fridge that exploded, and not an IED... The times we live in, a part of me begins to think, was it an accident??

 

2 weeks ago, a child was run down a street away from where I live, it turned out to be an extremely unfortunate traffic collision, and the driver was on scene, and co operated fully with the police. But so many were speculating hit'n'run I found myself beginning to think like that, before the official statement was released confirming it was not a malicious incident.

  • Like 2
Quote

London fire: 58 missing, presumed dead - police

 

A total of 58 people are dead or missing, presumed dead following the devastating fire at Grenfell Tower in west London, police have said.

 

Commander Stuart Cundy said that number "may increase". The BBC understands it could be around 70 people in total.

 

The recovery operation at the burnt-out block of flats has resumed and could take weeks, he said.

 

Meanwhile, PM Theresa May admitted support for families in the "initial hours" was "not good enough".

 

//

 

So far in the investigation:

  • Six victims have been provisionally identified by police
  • Three have been named so far, including Syrian refugee Mohammed Alhajali, 23., five-year-old Isaac Shawo, and artist Khadija Saye
  • Of those killed, one died in hospital
  • Nineteen people remain in hospital, 10 in critical care
  • A criminal investigation has been launched
  • UK councils are carrying out urgent reviews of their tower blocks, the Local Government Association says

 

Full article at the BBC

 

 

On 6/15/2017 at 7:19 AM, PsYcHoKiLLa said:

It's pretty certain that the cheap plastic cladding they used in the "renovation" has been a contributing factor in the fire taking such a hold, apparently there are 2 types of cladding, plastic based and mineral based, the mineral is much more durable, more fireproof but, of course, more expensive. So they've gone for the cheap option and people have paid for it with their lives.

>

That's how I see it. From my readings, 

 

They used Arconic (Alcoa spinoff) Reynobond PE composite exterior panels; a plain polyethylene foam core with thin aluminum sheeting on either side. This is meant for use as an insulating decorative panel in structures no higher than 3 stories/40 feet/12 meters; so sayeth the Arconic data sheet. The issue: if a fire starts the thin aluminum soon melts, exposing the quite flammable polyethylene and poof!!...the whole structure lights up. 

 

The US and Canada restrict the use of such products to the 12 meter/40 foot height. The UK has no such restriction, and Germany rates Reynobond PE the same as 12mm of bare wood.

 

The proper material to use is Reynobond FR or equivalent, a mineral based core (fire retardant) panel, but it's more expensive.  There are even more fire resistant products for very tall structures, but at an even higher cost.

 

Someone saved a few Euros, and t cost a lot of lives.

 

 

I live in a high-rise 16th floor, so I've been keeping an eye on this more closely then some, It turns out that cladding used was cheaper than the cladding on my block by £2 per pane and the insulation material is different to.. I don't want to seem unreasonable but for many years the emphasis has been on keeping cost down and I'm afraid this is the result of that policy. Although the front line involved is either the council or housing association, the policy of saving money at the expense of safety, there is only one organisation to blame. I have seen it here recently so I'm pretty sure its true,

8 minutes ago, NinjaGinger said:

>

Idon't want to seem unreasonable but for many years the emphasis has been on keeping cost down and I'm afraid this is the result of that policy. Although the front line involved is either the council or housing association, the policy of saving money at the expense of safety, there is only one organisation to blame. I have seen it here recently so I'm pretty sure its true,

I'd say the larger problem is with the national building code, if there is one. If it specified no flammable materials in exterior panels the (often incompetent) "public servants" wouldn't have as much wriggle room to screw up.

1 hour ago, DocM said:

I'd say the larger problem is with the national building code, if there is one. If it specified no flammable materials in exterior panels the (often incompetent) "public servants" wouldn't have as much wriggle room to screw up.

There are codes in place, but the greedy bastards who bid for the contracts when it comes to face lifting/renovating these types of accommodations, use loopholes and whatnot to get around some of them.. (I think I mentioned it earlier, but don't remember. But just in case I didn't, it's a little akin to the late '80's early '90's fire resistant seating materials for airliners. The materials would pass with flying colours in lab conditions, but in reality <an actual airliner fire>, they burned extremely well, with added toxins thrown off while they burned)

4 hours ago, Slarlac249 said:

cooked business is construction, like when developers build of land prone to flooding. money seems more important than peoples safety, well that's how it seems.

Not how it seems, how it is. Like those who build on grade in a flood plain or hurricane zone instead of on stilts, which prevent most flood damage. Stilt height varies by zone, elevator optional.

 

Preventive medicine is better.

  • Like 3
18 hours ago, DocM said:

That's how I see it. From my readings, 

 

They used Arconic (Alcoa spinoff) Reynobond PE composite exterior panels; a plain polyethylene foam core with thin aluminum sheeting on either side. This is meant for use as an insulating decorative panel in structures no higher than 3 stories/40 feet/12 meters; so sayeth the Arconic data sheet. The issue: if a fire starts the thin aluminum soon melts, exposing the quite flammable polyethylene and poof!!...the whole structure lights up. 

 

The US and Canada restrict the use of such products to the 12 meter/40 foot height. The UK has no such restriction, and Germany rates Reynobond PE the same as 12mm of bare wood.

 

The proper material to use is Reynobond FR or equivalent, a mineral based core (fire retardant) panel, but it's more expensive.  There are even more fire resistant products for very tall structures, but at an even higher cost.

 

Someone saved a few Euros, and t cost a lot of lives.

 

 

From what I've seen so far, apparently the difference in cost between the cladding used and the more fireproof cladding was £5000, on an £8.6 million project. Amazing.

 

A lot of vultures have descended down on Grenfell tower also, like the EDL, Britain First (both of whom were hassling a mosque who were helping their community including people from the tower and it's surrounding neighbours) and the Church of $cientology who've set up their usual "We're here to help, honest" stations.

Edited by PsYcHoKiLLa
  • Like 2
This topic is now closed to further replies.
  • Posts

    • JBL BAR 800 5.1.2 Dolby Atmos soundbar is an amazing deal today by Sayan Sen This Amazon Prime Day 2026 sales so far we have had a couple of nice deals related to sound and audio. First we have the Sennheiser HD 600 at its lowest ever price of just $225. Next we also have the Beats Studio Pro at its lowest price ever at just $150. However perhaps you prefer your gear to sound great on a larger scale, like throughout the room. In that case an all-in-one soundbar system can help and currently JBL's BAR 800 is a great deal for sure as it's up for grabs at just $600 (purchase link under the specs table down below). One thing that should be appreciated a lot about these JBL soundbars is their spec sheet and the frequency response data it provides. The firm is honest about it as JBL confirms the subwoofer is able to go down to 35 Hz at -6dB or F6. This means it should be covering 40Hz and up very well, where most of the bass lies. You miss out on a lot of sub-bass but that is to be expected given the price point and the subwoofer driver size. Speaking of which, it is a 10-inch driver and promises a max output power of 300 watts at 1% THD (total harmonic distortion). JBL also claims the system will provide you with a "True Dolby Atmos" experience. The surround speakers are wireless and battery-powered which means setting them up should be really convenient. The technical specs of the JBL BAR 800 are given in the table below: Specification Value Channel Configuration 5.1.2-channel soundbar system Dolby Atmos Yes, with 2 up-firing drivers Total System Power Output 720 W Soundbar Power Output 340 W Surround Speaker Power Output 2 × 40 W Subwoofer Power Output 300 W Soundbar Drivers 3 × 46×90 mm racetrack drivers, 3 × 20 mm tweeters, 2 × 70 mm up-firing full-range drivers Surround Speaker Drivers 1 × 46×90 mm racetrack driver (each speaker) Subwoofer Driver 10-inch (260 mm) wireless subwoofer Frequency Response 35 Hz – 20 kHz (-6 dB) Audio Inputs Optical, Bluetooth, Chromecast built-in, AirPlay, Alexa Multi-Room Music (MRM), USB* HDMI Inputs 1 HDMI video input HDMI Output 1 HDMI eARC output HDCP Version 2.3 HDR Pass-Through HDR10, Dolby Vision Bluetooth Version 5.0 Wi-Fi Version 6, 6E Streaming Services Chromecast built-in, Apple AirPlay, Alexa MRM Get it at the link below: JBL Bar 800-5.1.2-Channel Dolby Atmos soundbar with Detachable Surround Speakers (Black): $599.85 (Sold and Shipped by Amazon US with Prime) Prime subscription can be cancelled within three business days. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Microsoft releases PowerToys v0.100.1, fixes a bug that made remapped keys misbehave by Ivan Jenic Microsoft just released PowerToys v0.100.1, a patch update that addresses several stability and behavior issues found in v0.100.0. The v0.100.0 patch was a significant update for PowerToys, as it introduced all sorts of new features and additions, such as a rebuilt Shortcut Guide, a Command Palette Extension Gallery, webcam overlay support in ZoomIt, and more. However, the v0.100.0 version also introduced some bugs and stability issues. And now, Microsoft is addressing these issues in the new patch. The most impactful fix in this release perhaps is in Keyboard Manager, where remapped modifier keys were being delivered as system-key events, causing unexpected behavior in apps. The clearest example of this was Alt-to-Backspace remaps, deleting whole words instead of a single character. So, if you thought there was an issue with your keyboard, Microsoft just confirmed that it was PowerToys. Beyond the Keyboard Manager fix, v0.100.1 also addresses several other issues. It fixes a bug with Power Display that was preventing monitors from waking from standby correctly. Additionally, the new update patches Quick Access crashes on launch, and resolves a Shortcut Guide crash that occurred when switching between sidebar sections. Here’s the full changelog: Color Picker Fixed a bug where the main Color Picker window could appear inside the zoomed-in picker view Command Palette Fixed Run history initialization in AOT builds Fixed a bug where the Performance Monitor dock item could show ??? after restart Fixed the Hibernate command using the Sleep icon Limited the "pin to dock" dialog to displays where the dock is enabled Keyboard Manager Fixed modifier keys remapped to non-modifier keys being delivered as system-key events, which caused unexpected behavior in apps such as Alt-to-Backspace deleting whole words Power Display Fixed a bug where selecting On in the monitor power-state control did not wake a monitor from standby Fixed built-in display detection and brightness control on dual-GPU laptops where the internal panel is driven by the discrete GPU PowerToys Run Fixed VS Code Workspaces discovery after VS Code moved recently opened workspace data to shared storage Quick Access Fixed Quick Access flyout crashes caused by unhandled XAML exceptions during launch or page navigation Shortcut Guide Fixed a crash when navigating between Shortcut Guide sidebar sections Fixed number-key rendering in shortcut manifests and added a Postman shortcut manifest Updated bundled shortcut manifests to use the literal number-key token so number keys render correctly across apps ZoomIt Fixed a race condition in audio initialization for ZoomIt video recording You can download PowerToys v0.100.1 from the official GitHub releases page.
    • OBS Studio 32.2.0 Beta 2 by Razvan Serea OBS Studio is software designed for capturing, compositing, encoding, recording, and streaming video content, efficiently. It is the re-write of the widely used Open Broadcaster Software, to allow even more features and multi-platform support. OBS Studio supports multiple sources, including media files, games, web pages, application windows, webcams, your desktop, microphone and more. OBS Studio Features: High performance real time video/audio capturing and mixing, with unlimited scenes you can switch between seamlessly via custom transitions. Live streaming to Twitch, YouTube, Periscope, Mixer, GoodGame, DailyMotion, Hitbox, VK and any other RTMP server Filters for video sources such as image masking, color correction, chroma/color keying, and more. x264, H.264 and AAC for your live streams and video recordings Intel Quick Sync Video (QSV) and NVIDIA NVENC support Intuitive audio mixer with per-source filters such as noise gate, noise suppression, and gain. Take full control with VST plugin support. GPU-based game capture for high performance game streaming Unlimited number of scenes and sources Number of different and customizable transitions for when you switch between scenes Hotkeys for almost any action such as start or stop your stream or recording, push-to-talk, fast mute of any audio source, show or hide any video source, switch between scenes,and much more Live preview of any changes on your scenes and sources using Studio Mode before pushing them to your stream where your viewers will see those changes DirectShow capture device support (webcams, capture cards, etc) Powerful and easy to use configuration options. Add new Sources, duplicate existing ones, and adjust their properties effortlessly. Streamlined Settings panel for quickly configuring your broadcasts and recordings. Switch between different profiles with ease. Light and dark themes available to fit your environment. …and many other features. For free. At all. OBS Studio 32.2.0 Beta 2 changelog: Beta 2 Changes Fixed a CI deployment issue. There are no application changes since Beta 1. 32.2 New Features Replaced add source dropdown with new dialog [Warchamp7] Improved FPS selector UX [jcm93] Added missing file support for filters [exeldro] Added ability for plugins to set custom icons for new source types [cg2121] Included .webp files when adding a directory to Image Slide Show source [TarunCore] Added copy paste functions to frontend API [exeldro] Added filter to compose SDR into HDR [jpark37] Added delete as a hotkey to delete sources on macOS [PatTheMav] Added dynamic bitrate support to multitrack video [lexano-ivs] 32.2 Changes Forced Intel-based installations to update to Apple Silicon version on macOS [PatTheMav] This change means that OBS Studio versions built for Intel-based Macs but running on Apple Silicon Macs will automatically update to OBS Studio built for Apple Silicon Macs. If an installation was using third-party plugins, those plugins will no longer load until replaced with Apple Silicon versions. Fixed audio mixer state getting out of sync when changing settings via websockets or plugins [Warchamp7] Added theming for checked QToolButtons [glikely] Improved OpenGL performance slightly on low-end machines [kkartaltepe] Set minimum size for color source to 1 pixel [exeldro] Added minimum width to spinboxes [Warchamp7] Disallowed overwriting the crash handler [sebastian-s-beckmann] Applied process mitigation policies for Windows [notr1ch] Adjusted description of multitrack video [jhnbwrs] Changed new capture devices to use fallback frame rate by default [PatTheMav] Improved DLL loading behavior on Windows [notr1ch] Limited multitrack video config to Custom service [PatTheMav] 32.2 Bug Fixes Fixed OAuth and dock state save corruption [PatTheMav] Fixed group bounds not resizing when removing items [howellrl] Fixed canvas mixes not being restored after video reset [dsaedtler] Fixed some erroneous crashes during shutdown [Warchamp7] Fixed display capture sometimes capturing black after a duplicator failure [ThrowTop] Fixed color of controls dock output buttons in System theme [shiina424] Fixed virtual camera reset failures [stephematician] Fixed potential crash when user discards changes in the settings window [suogesi] Fixed incorrect return value in virtualcam filter [xtfo] Fixed source toolbar buttons not working after dragging a source into a group [Warchamp7] Fixed properties hint icon spacing [Warchamp7] Fixed potential crash when a video device reconnects on macOS [jcm93] Fixed an issue where PipeWire could fail on NVIDIA GPUs [hoshinolina] Fixed obs_canvas_get_video_info returning incorrect framerate [dsaedtler] 32.2 Deprecations Deprecated obs_properties_add_button [sebastian-s-beckmann] Download: OBS Studio 32.2.0 Beta 2 | Portable | ARM64 | ~200.0 MB (Open Source) View: OBS Studio Homepage | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Is a fast food restaurant a good metric to compare against?
    • Grand Theft Auto VI pricing revealed alongside Ultimate Edition and pre-loading details by Pulasthi Ariyasinghe Last week, Rockstar revealed Grand Theft Auto VI pre-orders will be starting soon, and just a day ahead of that, now the studio has announced the official pricing for the highly anticipated game. This has been a hotly debated topic among fans and industry veterans for a long time, considering the game is expected to be the biggest entertainment product launch ever. The confirmed pricing for the Grand Theft Auto VI standard edition is $79.99, which Rockstar says gives access to the "single-player experience set in the biggest, most immersive evolution of the series yet." This follows what most of our readers thought would happen with the pricing too. At the same time, a $99.99 Grand Theft Auto VI: Ultimate Edition has been confirmed as well, which lands with "an exclusive collection of premium vehicles, weapons, apparel, and action threaded across all aspects of Jason and Lucia’s story." Pre-ordering will also give fans extra bonuses, including a Vintage Vice City Pack of cosmetic items as well as a free month of GTA+. Head to the official website of the game here to check out all the cosmetic rewards the Ultimate Edition and pre-orders bring. Interestingly, the studio does not mention Grand Theft Auto VI multiplayer at all in today's announcement. Perhaps this will arrive later, following the campaign launch, or the studio is keeping that reveal for a later date. Digital pre-orders for Grand Theft Auto VI will begin on June 25, 2026, at midnight local time across regions for Xbox Series X|S and PlayStation 5. The title is slated to launch on November 19 on those same platforms. Pre-loading for Grand Theft Auto VI will kick off on November 12, giving players a week to get the game ready on their consoles. As for the physical edition, Take-Two has confirmed that this will be available without a disc, with the box only containing a download code inside. This will be purchasable starting November 12, giving players who take this route time to pre-load the title as well.
  • Recent Achievements

    • One Year In
      OHI Accounting earned a badge
      One Year In
    • First Post
      Almohandis earned a badge
      First Post
    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      122
    4. 4
      Michael Scrip
      83
    5. 5
      Xenon
      72
  • Tell a friend

    Love Neowin? Tell a friend!