Recommended Posts

1 hour ago, anthdci said:

Is there much change from SN3? I presume we don’t get much information about that

 

They reused the SN-03 lower skirt, which includes the 6 landing legs.

 

There are also plumbing upgrades, including a revamped pressurization system. Problems with pressurization and a human error killed SN-03. Welding is constantly being improved. Domes are also bring improved.

 

SN-05 has numerous changes, and they're prepping to add the revamped fins and larger landing legs. 

 

Also, wider rings are in the plan...

 

 

 

 

3 hours ago, DocM said:

On to mounting three Raptor engines and a static fire...

 

"SN4 PASSED CRYO PROOF! :D"

 

 

 

I think SN4 is only planned for a single raptor and hopefully a 150m hop test with SN5 going full 3 engines.

20 hours ago, Skiver said:

I think SN4 is only planned for a single raptor and hopefully a 150m hop test with SN5 going full 3 engines.

Yup. Good odds SN-04  gets longer landing legs and the nose cone. 40/60 it gets fins.

  • Like 2

Postponed "a few days."

 

The Cameron County Judge (county/parish executive in most states) signed off on a Route 4 road closure, but the state roads dept. had other plans and pulled rank. 

 

They'll likely do equipment checks, a wet dress rehersal, then fire up the pre-burners and let 'er rip.

 

Edited by DocM

I'm so excited that they are already going for reusable vehicles that are not supposed to go back to earth, I suspect this could put us on a quick path toward space only transportation vehicles, which could quickly open a lot of new and exciting possibilities.

Here's to hoping for an orbital construction yard soon 😄

SN-04 STATIC FIRE!!

 

SN-05 is being stacked, SN-06 is right behind her.

 

Single Raptor engine, ~4 seconds. Ramping to the 3 engine center cluster, with 6 engines being the usual compliment (3 each sea level & vacuum optimized)

 

The Super Heavy booster gets 31 sea level engines.

 

NASASpaceFlight stream

 

LabPadre stream

 

  • Like 1

May 16 (tomorrow) a static fire, May 18 a hop.

 

Updated FAA NOTAM

 

FDC 0/1466 - TX..AIRSPACE BROWNSVILLE, TX..TEMPORARY FLIGHT RESTRICTIONS WI AN AREA DEFINED AS 260124N/0970742W TO 255818N/0970742W TO 255818N/0971108W TO 260124N/0971108W TO 260124N/0970742W SFC-16000FT TO PROVIDE A SAFE ENVIROMENT FOR SPACE LAUNCH AND REENTRY OPERATIONS PURSUANT TO 14 CFR SECTION 91.143. SPACEX ARE AUTH IN THE AIRSPACE. SPACEX TELEPHONE 321-361-7062 IS IN CHARGE OF THE OPERATION. HOUSTON /ZHU/ ARTCC TELEPHONE 281-230-5560 IS THE FAA CDN FACILITY. 18 MAY 11:00 2020 UNTIL 18 MAY 19:00 2020. CREATED: 15 MAY 21:15 2020

  • Like 2

Buckle up kiddies...

 

1 hour after the successful SN-04 static fire with a 25 tonne mass simulator, the FAA issued a 2 year suborbital RLV launch license. This is for any number for Starship missions.

 

https://t.co/ksyfzc4Gj1?amp=1

 

Monday's NOTAM is for up to 26,000 feet.

 

Also; they'll be removing the flare stack, replacing it with a condensation unit so they can trap & liquify vented methane instead of burning it.

 

 

 

  • Like 1
21 hours ago, DocM said:

Buckle up kiddies...

 

1 hour after the successful SN-04 static fire with a 25 tonne mass simulator, the FAA issued a 2 year suborbital RLV launch license. This is for any number for Starship missions.

 

https://t.co/ksyfzc4Gj1?amp=1

 

Monday's NOTAM is for up to 26,000 feet.

 

Also; they'll be removing the flare stack, replacing it with a condensation unit so they can trap & liquify vented methane instead of burning it.

 

 

 

Not much left of SN4. Roll up SN5.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Kdenlive 26.04.2 by Razvan Serea Kdenlive is an acronym for KDE Non-Linear Video Editor. It works on GNU/Linux, Windows and BSD. Through the MLT framework, Kdenlive integrates many plugin effects for video and sound processing or creation. Furthermore Kdenlive brings a powerful titling tool, a DVD authoring (menus) solution, and can then be used as a complete studio for video creation. Kdenlive supports all of the formats supported by FFmpeg or libav (such as QuickTime, AVI, WMV, MPEG, and Flash Video, among others), and also supports 4:3 and 16:9 aspect ratios for both PAL, NTSC and various HD standards, including HDV and AVCHD. Video can also be exported to DV devices, or written to a DVD with chapters and a simple menu. Video editing features: Multi-track editing with a timeline and supports an unlimited number of video and audio tracks. A built-in title editor and tools to create, move, crop and delete video clips, audio clips, text clips and image clips. Ability to add custom effects and transitions. A wide range of effects and transitions. Audio signal processing capabilities include normalization, phase and pitch shifting, limiting, volume adjustment, reverb and equalization filters as well as others. Visual effects include options for masking, blue-screen, distortions, rotations, colour tools, blurring, obscuring and others. Configurable keyboard shortcuts and interface layouts. Rendering is done using a separate non-blocking process so it can be stopped, paused and restarted. Kdenlive also provides a script called the Kdenlive Builder Wizard (KBW) that compiles the latest developer version of the software and its main dependencies from source, to allow users to try to test new features and report problems on the bug tracker. Project files are stored in XML format. An archiving feature allows exporting a project among all assets into a single folder or compressed archive. Built-in audio mixer Kdenlive 26.04.2 changelog: Remove not needed actions from render info, fix rough size calculation for rendering. Fix clip sometimes not inserted in timeline when moving vertically in bin drag. Fix transcoding from clip properties. Cleanup render profile audio quality. Use percent based value for audio quality, and adjust the range accordingly per codec. Fixes bug #520750 Enforce even numbers for render width/height. Fixes bug #520737 Fix nightly flatpak - disable rnnoise until implemented. Fix missing initialization. Edit mediacapture.cpp. Fix document unnecessarily marked as modified on opening, triggering a backup request. Fix incorrect detection of missing and remote clips causing unwanted backups. Fixes issue #2194 Fix tests. Fix tmp files copied to wrong location when setting project folder. Fixes bug #467740 Fix color clips not selected on creation. Use QFileInfo instead of QUrl/QDir to try fixing Windows shared drives. Fixes bug #451413 Fix timeline preview incorrectly invalidated when a track with effect duration changed. Fixes bug #514541 Fix missing var. Display paths in native format in render widget. Fixes bug #520428 Simple splash: fix pressing return always triggered the same button. Minor update to simple splash. Fix unwanted clips added to timeline and cleanup. Fixes issue #2190 Minor layout improvements to welcome screen, add Quit and Open shortcuts. Fix broken welcome dialog layout in tiling compositors. (craft) Limit the number of CPU cores used during a Windows build with mingw as some .cpp files are memory intensive to build. (kde-ci) Limit the number of CPU cores used during a build as some .cpp files are memory intensive to build. (kde-ci) Cleanup old entries. Another fix for animation crash. Fix uninitialized function - crash on create animation. Another attempt to fix MacOS permissions. MacOS: fix bundle release version. Fix MacOS plist path. Fix MacOS build. Explicitely link against Qt::Core. Download: Kdenlive 26.04.2 | 128.0 MB (Open Source) Download: Standalone Executable View: Kdenlive Home page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Here's how to watch the Xbox Games Showcase today and what to expect by Pulasthi Ariyasinghe The June games showcase week has been a packed one, with everything from major presentations like Sony and Summer Game Fest to indie-focused reveals coming in almost every day. Now, it's almost time for another big one, with Microsoft bringing its Xbox Games Showcase back later today. This is a double feature too, with a Gears of War E-Day deep dive also being attached to it. For anyone wanting to tune in online, the 2026 Xbox Games Showcase is kicking off at 10 AM PT | 1 PM ET | 6 PM BST | 7 PM CEST later today, June 7. The event will be available to watch on the official Xbox YouTube (4K 60FPS), Twitch, Facebook, Steam, Amazon Live, and other portals. Separate livestreams for American Sign Language and Audio Description will also be available. "This year marks 25 years of XBOX, and this Showcase is poised to be a true celebration, offering world premieres, new gameplay, fresh updates, and more for a swathe of projects we cannot wait to share," said Microsoft about this presentation. With a new CEO behind it that is pulling off some interesting moves, Xbox may have some surprises to reveal today. New looks at first-party games like Halo Campaign Evolved from Halo studios, Fable from Playground Games, InXile Entertainment's Clockwork Revolution, Mojang's Minecraft Dungeons II, and Call of Duty: Modern Warfare 4 from Infinity Ward are to be expected here. We may finally get to see the new Blade from Arcane Studios in action and a new Persona game from Atlus at the showcase too. Surprise announcements may also arrive from other Microsoft-owned studios like Bethesda, MachineGames, Ninja Theory, Obsidian, Rare, World's Edge, or Blizzard. Considering how every new release nowadays is staying away from November and December to avoid Grand Theft Auto VI's release, any launch dates Microsoft announces will probably skip those months as well. Once the Xbox Games Showcase ends, Microsoft will immediately kick off the Gears of War: E-Day Direct. This deep dive into the upcoming prequel from The Coalition should attach gameplay footage and perhaps a release window to the highly anticipated project.
    • People in the '50s and '60s had the same attitude, and we're still here over a half century later.
    • So after some fiddling I was able to get it to run at a pretty stable 30FPS. I'm slightly surprised about how much fiddling I had to do to get there though given what I thought was reasonable hardware: Processors: 16 × AMD Ryzen 7 7840HS w/ Radeon 780M Graphics Memory: 16 GiB of RAM Graphics Processor 1: AMD Radeon 780M Graphics Graphics Processor 2: AMD Radeon RX 7700S I think I could do it better if I use Linux rather than Windows, Windows RAM usage is stupid without stripping the system down. But once I got it working in a reasonable state, it was so awesome! I felt like a new Bond! If anyone has any advice to get things going a bit smoother FPS-wise, I'd appreciate it.
    • Something is rotten in the state of Denmark Australia
  • Recent Achievements

    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      256
    3. 3
      Steven P.
      74
    4. 4
      +Edouard
      70
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!