Recommended Posts

46 minutes ago, Steven P. said:

Scrubbed again.

 

SNAG-0011.png

 

https://www.fly.faa.gov/adv/adv_spt.jsp

 

In The Expanse, once they take ownership of a vehicle they launch to Luna. I saw it in this weeks episode on Amazon.

Damn you, I've not seen this weeks episode yet! 🖕;)

21 minutes ago, FloatingFatMan said:

Y'know... I find it unacceptable that people that have lived there for years should have to evacuate just because some new guy bought some land near them...  Perhaps he should have bought it further away, hmmm?

 

 

I think there are only 2 permanent residents still there, and SpaceX is working on buying their homes.  Pretty minor impact for something that will benefit mankind.

46 minutes ago, FloatingFatMan said:

Y'know... I find it unacceptable that people that have lived there for years should have to evacuate just because some new guy bought some land near them...  Perhaps he should have bought it further away, hmmm?

The state was begging SpaceX to select that site instead of sites in Puerto Rico, Georgia, Florida (north of KSC) and other coastal locations. Even now it's a County Spaceport Authority, the state and Feds who set the ground rules. 

 

Speaking of the Feds...

 

/sigh...

 

 

 

 

 

16 hours ago, Astra.Xtreme said:

I think there are only 2 permanent residents still there, and SpaceX is working on buying their homes.  Pretty minor impact for something that will benefit mankind.

I'm sure the site has brought a lot of jobs to the area too. As the site grows, so will the surrounding area I imagine.

Also you've got people like Tim Dodd and I suspect many others all set up in Hotels for weeks on end bringing even more money to the town. 

On 28/01/2021 at 13:35, FloatingFatMan said:

Y'know... I find it unacceptable that people that have lived there for years should have to evacuate just because some new guy bought some land near them...  Perhaps he should have bought it further away, hmmm?

 

There are only 2 full time residents at Boca Chica Village, and they're SpaceX fans. A few other properties are owned by "snowbirds," people from northern states who travel south during the winter; over holidays, etc. 

 

SpaceX has bought out everyone else at premium prices, and the few which remain are likely to sell.

Otherwise the Cameron County Spaceport Authority, a govt agency, gets involved to clear the zone. For now they're evacuating residents during launches to a safe & comfortable site, but this won't last forever.

Edited by DocM

Scrubbed today. 

 

SpaceX has penciled in Monday.

 

NASA's Human Lander System program people have been in and out of there for over a week to observe the flight.

 

The Washington Post report sounds like the heat is on FAA,

 

https://www.washingtonpost.com/technology/2021/01/28/elon-musk-spacex-starship-faa/

Quote

 

An official with knowledge of the FAA’s thinking pushed back against Musk’s allegations and said the agency had been in constant contact with SpaceX over the flight and was very close to issuing the modification to the license required for the flight.

 

The agency is “not purposefully slowing the process down,” said the person, who spoke on the condition of anonymity to discuss internal processes. The FAA has “a responsibility to the American people and particularly those who live in the southern Texas area to make sure they are not put at undue risk.”

 

MEANWHILE, 

 

the party has a crasher - SN-10 is heading to Test Stand A. Prepare for some awesome pics showing 2 Starship's side by side 😍

 

 

 

10 minutes ago, DocM said:

The Washington Post report sounds like the heat is on FAA,

 

https://www.washingtonpost.com/technology/2021/01/28/elon-musk-spacex-starship-faa/

Quote

 

An official with knowledge of the FAA’s thinking pushed back against Musk’s allegations and said the agency had been in constant contact with SpaceX over the flight and was very close to issuing the modification to the license required for the flight.

 

The agency is “not purposefully slowing the process down,” said the person, who spoke on the condition of anonymity to discuss internal processes. The FAA has “a responsibility to the American people and particularly those who live in the southern Texas area to make sure they are not put at undue risk.”

 

Would a new administration have anything to do with this? or was this also common with the last?

Man, the live feed makes it sound like it is all being run by amateurs because no-one seems to know what is happening and I couldn't find an official web page for it either.

 

Yesterday's launch was happening right up until it was no longer possible despite the fact the FAA called it off shortly after the window opened on Thursday and all I heard after that was how the FAA was somehow wrong but no-one knew either way so prep was made right up until before the launch sequence (which they can call a test in hindsight) either way, the chaps on the live feed didn't know what was happening.

57 minutes ago, Steven P. said:

Man, the live feed makes it sound like it is all being run by amateurs because no-one seems to know what is happening and I couldn't find an official web page for it either.

 

That's because no one does know what's happening.  Part of it is the FAA AST office that handles this is seriously understaffed. Another part is that, in general, the Federal govt. is overly bureaucratic and incompetent.

 

This is regardless of who's in charge. It's why when some proposal to create  another big program comes along many or most Americans just go "O-M-G, another s***show 🙄

 

FAA fits this for several reasons (see how they've mis-handled Boeing, anti-collision systems, etc.) 

Quote

 

 

  • Like 3
1 hour ago, bguy_1986 said:

Would a new administration have anything to do with this? or was this also common with the last?

 

A new administration may be part of it, but not because of politics. During the first weeks of a new administration the agencies are running on autopilot. New agency heads haven't been appointed yet, so you see "Acting..." department heads with reduced authority (Fred? He won't be there in 6 weeks. Ignore him...)

 

  • Thanks 1

Temporary Flight Restriction for Boca Chica

 

Date: Tuesday, February 2, 2021

Altitude: unlimited

 

https://tfr.faa.gov/save_pages/detail_1_9224.html

 

Screenshot_2021-01-31-20-13-44-651.thumb.jpeg.f4595c094dd6d06cb2b48c16d3c7c7f4.jpeg

 

Washington Post

 

Edited by DocM
  • Like 1
  • Thanks 1

This is just the BN1 Super Heavy booster's LOX tank 🤪

 

Full height of the SH booster stage will be  70 meters (230 feet), as tall as a fully stacked Falcon Heavy (all stages + the cargo fairing). The NASA Space Launch System (SLS) booster stage is 65 meters (212 feet). 

 

 

20210201_121210.thumb.jpg.dbef16a4edc0be461a74523468517e3b.jpg

  • Like 3
2 hours ago, dfuk said:

I wonder if SN15 will be the first starship to be stacked to the booster.

I guess that'll depend on how the SN-09, SN-10 and BN1 test flights go.  They may use SN-15 for a suborbital re-entry test, then do a full launch with 16 or 17 on BN2.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • BetterMediaInfo 1.0.0 by Razvan Serea BetterMediaInfo is a modern, open-source graphical user interface for MediaInfo, designed to improve metadata inspection workflows for audio and video files. It extracts and presents technical parameters such as codec profiles, bitrates, resolution, frame rate, stream ordering, and container-level attributes in a structured, readable layout. The interface is built with clarity and responsiveness in mind, supporting drag-and-drop functionality. It preserves the full feature set of the MediaInfo library while making the data easier to parse for users working in media management, encoding validation, or post-production environments. In short, BetterMediaInfo takes the power of MediaInfo and makes it much easier to use. Whether you're checking video quality, verifying audio settings, or just curious about a file's details, it gives you clear, organized info without the clutter. Requires Microsoft Edge WebView2, which is included in most Windows versions. BetterMediaInfo 1.0.0 changelog: Added an Image stream table to the card view and detail view, including type, color space, resolution, and size fields. Added View settings to toggle Image stream tables in card view and detail view. Added BatchMkvMerge to the welcome page with localized descriptions and a GitHub link. Added a portable 7z archive to the Windows release artifacts. Improved first-run language selection by detecting the system language and saving it to configuration. Updated Italian translations. Download: BetterMediaInfo 0.10.0 | MSI Setup ~9.0 MB (Open Source) Download: BetterMediaInfo for MacOS View: BetterMediaInfo Homepage | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • We wrote about it here https://www.neowin.net/news/browser-vendors-pen-open-letter-to-microsoft-saying-enough-is-enough/ the open letter itself is here https://browserchoicealliance.org/open-letter/
    • Someone forgot to mention EDR in the title ? I think I will not click anymore on the articles written by this author. All are click bait.
    • Browser vendors including Chrome, Firefox, Brave, and Vivaldi have jointly written an open letter to Microsoft saying enough is enough regarding Edge being pushed on Windows users without consent. Microsoft makes it difficult to change the default browser, promotes Edge throughout Windows 11, and has made the uninstall process unnecessarily complicated compared to other apps. Does anyone have more details on what exactly the open letter demands and whether any regulatory action is being considered? Also curious whether this could lead to antitrust investigations similar to what happened with Internet Explorer back in the day. Would love to hear from anyone following this closely.
    • The best-selling all-rounder GEEKOM A6 mini PC is now 20% off and cheaper than Prime Day by Steven Parker GEEKOM is having a sale on the A6. It comes from its "A series" of mini PCs, which are supposed to support AI natively; however, although others in the series include an NPU, this A6 variant does not. Below is a quote from the buyer's guide from the official website: Mini PCs that include a dedicated NPU are still quite expensive, which explains the low price of this A6 variant. Below are its full specifications. GEEKOM A6 Dimensions 112.4 mm x 112.4 mm x 37 mm Weight 450g CPU Ryzen 7 6800H (Base 3.2GHz, Turbo 4.7GHz 8C, 16T, 16MB L3 Cache) TDP: 45W Graphics AMD Radeon™ 680M Graphics 12 RDNA 3 Graphics Cores @ 2200MHz (Boost) 768 shading units/stream processors (12 CUs), 48 texture mapping units and 32 ROPs NPU No Memory 32GB Dual-channel Crucial DDR5-4800MT/s SODIMM (up to 64GB) Storage 1x Kingston 1TB NVMe M.2 (PCIe Gen 4.0 x4) Operating System Windows 11 Pro Bluetooth Bluetooth v5.4 Wireless LAN Wi-Fi 6E Kensington Lock No SD Card reader Yes (left side) Adapter 120W, 6.32A, 19V Power Adapter Front I/O Ports 2 x USB 3.2 Gen 2 Type-A 1 x 3.5mm front stereo headset jack Rear I/O Ports 1 x USB 3.2 Gen 2 Type-A 1 x USB 4 Gen 3 Type-C with Power delivery up to 15W (5V 3A) 1 x USB 3.2 Gen 2 Type-C 1 x USB 2.0 Type-A 2 x HDMI 2.0b 1 x 2.5G RJ45 LAN 1 x DC-in Price $599/$649 Here are the key features and dimensions (in inches) of the GEEKOM A6: We reviewed the A6 back in February and rated it highly. Below is a summary from that review: If you want to know more about my findings, do check out the above-linked review. GEEKOM offers three years of warranty on its products, and if needed, you can RMA or return them locally, relative to your region (the U.S. has a U.S. warehouse, and the E.U. has a Germany warehouse). Buy the GEEKOM A6 (16+512) for $479 (was $599) at GEEKOM U.S. Buy the GEEKOM A6 (16+1TB) for $519 (was $649) at GEEKOM U.S. Buy the GEEKOM A6 (16+1TB) for $519 (was $649) at Amazon U.S. When checking out, use the 20% off NWGKA620 coupon code. Best of all, the shipping is quick and free.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      491
    2. 2
      PsYcHoKiLLa
      242
    3. 3
      ATLien_0
      73
    4. 4
      Steven P.
      73
    5. 5
      +Edouard
      67
  • Tell a friend

    Love Neowin? Tell a friend!