Recommended Posts

One additional thing I'm seeing. The account field cannot be more than I think 25 characters it look like. The IIF generator will chop off the account name if it is too long, and when it's imported, another account is created to the chopped. That's happening with only a handful of accounts who's name's are too long. If no fix is possible, I'll just shorten up about 5 of my account names. Thx!

On 18/05/2024 at 22:17, Jason Doster said:

- A transaction item given name had a "#" in front upon json creation that needs to be removed, and then of course given the appropriate syntax to line up with a record you want from the transaction list. That was easy, but took a bit as I was going through 250 patterns imported.

Yep, that was intentional . This stops unintentional matchings. If you had hundreds of transactions and loaded the pattern file, something might match that you didn't mean to have matched. This way, you have to intentionally remove the #.

  • Like 1
On 19/05/2024 at 13:03, Jason Doster said:

 In the PATTERN load, would it be possible to place the OLD matched transaction name into the MEMO line for reference after the transaction has been matched and has a new transaction name

Thx! Jason

image.thumb.png.8542375975748d4b0cc023b7129f1250.png

 

  • Like 2
On 19/05/2024 at 15:32, Jason Doster said:

One additional thing I'm seeing. The account field cannot be more than I think 25 characters it look like. The IIF generator will chop off the account name if it is too long, and when it's imported, another account is created to the chopped. That's happening with only a handful of accounts who's name's are too long. If no fix is possible, I'll just shorten up about 5 of my account names. Thx!

I tried an account name with 32 characters and it didn' t get cut off on the export *shrugs*

Copy. It probably is 32 lines, including the number up front, not 25.

An Example. This particular account gets cut off when I do an IIF import:

6170 - Computer and Internet Expenses

gets cut off to:

6170 - Computer and Internet Ex

So, I guess that is about 32 characters. Is that the limit for IIF? If it is, I'll just change about 5 of my account names.

Also, understand on the 4.1beta, you're reading my mind man. I'll take a look.

Thx!

Jason

On 20/05/2024 at 16:08, Jason Doster said:

Copy. It probably is 32 lines, including the number up front, not 25.

An Example. This particular account gets cut off when I do an IIF import:

6170 - Computer and Internet Expenses

gets cut off to:

6170 - Computer and Internet Ex

So, I guess that is about 32 characters. Is that the limit for IIF? If it is, I'll just change about 5 of my account names.

Also, understand on the 4.1beta, you're reading my mind man. I'll take a look.

Thx!

Jason

It's not cutting off for me.  I tried both a Quickbooks Bank account name and an account name. Both aren't getting cut off. If it's getting cut off in the import, it must be a Quickbooks restriction because it appears to be getting recorded correctly in the if file.

image.thumb.png.15ff26728b0c36e3af110673e01e0098.png

image.png.d857e3b7df5b62f8aebcae8b6767b367.png

On 21/05/2024 at 12:06, Jason Doster said:

I think this is a Quickbooks IIF versus QBO limitation. The limits are different. Interesting.

Also released Beta 10

It now takes dates such as 2024-04-30T07:00:00+00:00 and and replaces it with 2024-04-30

I saw one bank that was dumb enough to include that date. if left as is, Quickbooks freaks out.

  • Like 1
On 21/05/2024 at 12:06, Jason Doster said:

I think this is a Quickbooks IIF versus QBO limitation. The limits are different. Interesting.

Added in new Beta 11 .....I really have to feature lock 4.1

A new mapping feature that helps you make incompatible CSV's compatible.

image.thumb.png.e55e0567d691e54b71b20c083a8a4658.png

 

  • Like 1

Created an account just to post this.   I saw this software a couple weeks ago but didn't get to try it until this weekend.   First of all.  Thanks for creating and posting this.   I have QB2021 and thats blowing up on 5/31 and they no longer offer a reasonable desktop version so this is a godsend if it works.   (I had some issues but turns out your beta has the memo thing added so lucky me, bleeding edge)

I was hoping this will also help me with my quicken2017 qif issues but tunrs out QIF and IIF formats are quite different.  I have been getting around it for now with my home made unix scripts.  (I am running qbooks and quicken in virtual windows under mac)

Again.  Thanks!   Was gonna email you but lost the email address so there.   

  • Like 1
On 25/05/2024 at 14:57, rorozoro said:

Created an account just to post this.   I saw this software a couple weeks ago but didn't get to try it until this weekend.   First of all.  Thanks for creating and posting this.   I have QB2021 and thats blowing up on 5/31 and they no longer offer a reasonable desktop version so this is a godsend if it works.   (I had some issues but turns out your beta has the memo thing added so lucky me, bleeding edge)

I was hoping this will also help me with my quicken2017 qif issues but tunrs out QIF and IIF formats are quite different.  I have been getting around it for now with my home made unix scripts.  (I am running qbooks and quicken in virtual windows under mac)

Again.  Thanks!   Was gonna email you but lost the email address so there.   

Hi, I recently pulled version 4 and 4.1, which had an issue where split transactions weren't getting recorded to the IIF file, so I released 4.2 beta. That includes the fix.

image.thumb.png.1acb3425656a338ac0814598a8079fc6.png

 

I contributed $50 to ya. I'll contribute another $50 in a month or so, thanks for your work.

Noticed one thing about 4.2. Unlike 4.0, the option to import QBO information, modify the name field, THEN use a PATTERN file, doesn't seem to work. It does work in 4.0. Right now I'm using 4.2 for most things, love the additional creature comforts you added. When I need to change a generic CHECK or DEPOSIT into something to apply a PATTERN file to, I go back to 4.0 in order to do that currently. For your SA.

Thx!

On 02/06/2024 at 12:29, Jason Doster said:

I contributed $50 to ya. I'll contribute another $50 in a month or so, thanks for your work.

Noticed one thing about 4.2. Unlike 4.0, the option to import QBO information, modify the name field, THEN use a PATTERN file, doesn't seem to work. It does work in 4.0. Right now I'm using 4.2 for most things, love the additional creature comforts you added. When I need to change a generic CHECK or DEPOSIT into something to apply a PATTERN file to, I go back to 4.0 in order to do that currently. For your SA.

Thx!

Yes, I had to remove that in 4.2 because in 4.0 and 4.1, the splits were broken and were not being recorded because of how the name was being recorded. All you have to do now is click the account box, and you should still be able to edit the name and account.

  • Like 1

@Jason Doster

image.png.c3908dc954d085f8bf0bacbfd9004c08.png

 

  • New: Added the option to import autocomplete data using account list and vendor list from Quickbooks into Autocomplete options.
  • New: Added a help button that says "How do I create an account or vendor CSV file?" it gives you instructions how to create the file.
  • New: Renamed clear autocomplete data to Autocomplete Options
  • New: Autocomplete added to the "Replace with" field of the pattern editor.
  • New: Unified Autocomplete. The pattern editor and the main app now share the same autocomplete data via autocomplete.json. The pattern file data no longer gets added to the autocomplete when you load the file into the main app but instead when it gets loaded into the pattern editor and when items are being added or updated.
  • Like 1
On 07/06/2024 at 18:30, archon810 said:

Love the tool now that Quickbooks has gone insane and jacked up the pricing over 3x for Desktop Pro, but I'm confused about what a Debit offset account is. I never had to use this with bank imports with Chase. Bottom left of every transaction - huh?

You actually set that account when the program opens for the first time. It's just a holding account in Quickbooks before being categorized into a specific account, such as food or automobile expenses. In my case, I put it in "premierEcorp debit offset." Then, after I import, I go into that account in QuickBooks, where I find all the accounts that have not been handled yet. My bank always used "PremierEcorp debit offset" in the iif file they used to give me.

Chase may have specified a different account.

Sent a second payment to ya. Thx for your efforts! I hope may more folks have started to see what you've done....if so many will be able to use indefinitely older versions of Quickbooks and survive just fine without paying exorbitant amounts each year for basic capability in an accounting system. Jason

On 24/08/2024 at 19:31, Jason Doster said:

What's up with the Reddit page. I really don't understand why your post is against community standards. That's total BS. My guess is they are just pandering to Quickbooks. We need to advertise your software here far and wide.

I posted that telegram channel link to my page

so it got locked..

That's the one new one I created

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ladybird Browser is no longer accepting outside contributions thanks to AI by David Uzondu The Ladybird Browser Project has announced it will no longer accept public pull requests and will limit changes to those made by its maintainers as it works towards its first alpha release. According to Ladybird's creator Andreas Kling, this is "not a change we make lightly," but the rapid shift in AI capabilities forced their hand. Previously, a massive PR implied that the person behind it put a lot of care into the code and is ready to "answer for the consequences." Now with AI, anyone can generate a PR without even understanding the bug fix or feature they want merged. The blog post goes on to say that the team is closing all open public pull requests immediately, and that maintainers will not treat external forks as a review queue for upstream Ladybird. Instead, the team wants outside contributors to focus on reporting bugs and running tests. Kling started Ladybird back in 2019 as LibHTML, a simple HTML viewer for his hobby operating system, SerenityOS, but by September 2022, it had turned into a full-fledged browser project. What sets Ladybird apart from the likes of Google Chrome, Apple Safari, or Mozilla Firefox is its totally independent engine, which does not rely on pre-existing codebases. The project maintains a strict policy against default search engine deals or user data monetization, keeping development funded entirely by donations and sponsorships. Generative AI is forcing open source project maintainers to rethink how they handle public code contributions (and the whole open-source thing in general). One month ago, a leak about the National Health Service (NHS) suggested the organization was planning to take all of its public repositories private ahead of a May 11 deadline, thanks to Mythos (an AI model that Anthropic believes is too dangerous to be released to the public) and its ability to find and write exploits for zero-day vulnerabilities. Thankfully, the Government Digital Service (GDS) issued a counter-report titled "AI, open code and vulnerability risk in the public sector" that stopped the shutdown by pointing out that hiding code does not improve security.
    • Kalmuri 4.2.4 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.4 changelog: Fixed an issue where color picking could occasionally freeze Improved capture stability Resolved a possible unexpected app shutdown in certain cases Refined internal handling for a smoother experience Download: Kalmuri 4.2.4 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.4 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I like the show more options. The only problem with it is that it's not always in a consistent spot in the menu. If the copy/paste/cut, happens to show on top, then more option is the last in the menu. But if copy/paste/cut happens to show on the bottom, then more options is before the copy/paste/cut. But I do like the more options because it hides the stuff that I rarely use. But I would like to choose what it is or isn't hiding. That would make it better.
    • I wonder if "put it back the way it was for decades" ever crossed their minds? 🤣
    • Rescind the stupid "Show more options" in context menus and just give us the full menu instead of adding more steps to get to what we want. The "simpler by default" makes me think they'll go in the opposite direction. Every context menu should have a configure button so you can pick and choose what options should be shown, I know you can do that with some registry fu but that shouldn't be required.
  • Recent Achievements

    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      PsYcHoKiLLa
      250
    3. 3
      Skyfrog
      81
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!