• 0

Running Mac OS X on x86 PC!

Asked by S.MULLA,

 Share

Question

3213 answers to this question

Recommended Posts

  • 0
Grand Master

SkyyPunk Veteran

Posted
  • Veteran
Posted
I have been trying this but I cant get it to boot can anyone telly me what this error message means?

I'm not sure that I setup my img file properly. The error is APPLEMAC IO TEST FAILS

yea mine does it to, it takes a while to actually load though, thats normal what you see

  • 0
Grand Master

Timan Veteran

Posted
  • Veteran
Posted
This might feel like a kick in the balls...

http://pearpc.sourceforge.net/installmacos.html

Note step four.

I don't think a full Darwin Installation is required, only the partitioning.

We're done with the partition map. Enter reboot and wait for PearPC to quit.

Now restart PearPC.

Wait again (and possible wait some more again) and when asked enter  1 as device, 0 as partition and then yes to confirm  the installation to the selected disk.

Its funny that the installation of darwin asked for the last stuff, when the partitioning didn't, maybe this is why no one can install it?

  • 0
Proficient

Jackalo

Posted
Posted

I'm building an unofficial guide (like I did for SheepShaver) for PearPC. You can follow it over at E-Maculation.

http://www.emaculation.com/phpBB/viewtopic.php?t=934

I left out the whole Darwin partitioning bit, but I'm feeling lazy/tired at the moment.

If anyone who has successfully gotten Mac OS X to the installer or beyond sees something that I'm not doing (or doing wrong) in the guide, please let me know.

  • 0
Grand Master

Timan Veteran

Posted
  • Veteran
Posted
I'm building an unofficial guide (like I did for SheepShaver) for PearPC. You can follow it over at E-Maculation.

http://www.emaculation.com/phpBB/viewtopic.php?t=934

I left out the whole Darwin partitioning bit, but I'm feeling lazy/tired at the moment.

If anyone who has successfully gotten Mac OS X to the installer or beyond sees something that I'm not doing (or doing wrong) in the guide, please let me know.

ah I knew your name looked fimilar, from emac!

  • 0
Grand Master

SkyyPunk Veteran

Posted
  • Veteran
Posted

install2.jpg

no darwin or anything...

i was installing panther but i forgot the panther i have is upgrade, so i am now installing 10.2, then may put panther on tomorrow...

# PearPC Configuration File

#

# Resolution

#

# 0: 640x480x8 (indexed)

# 1: 640x480x15

# 2: 640x480x32

# 3: 800x600x8 (indexed)

# 4: 800x600x15

# 5: 800x600x32

# 6: 1024x768x8 (indexed)

# 7: 1024x768x15

# 8: 1024x768x32

#

# The indexed modes are unsupported.

#

# default: 4

ppc_start_resolution = 5

#

# Redraw interval (in ms)

# must be between 1 and 999

#

# If you set this higher, PearPC will spend less time doing redraws (and so run faster)

# but feel less responsive. You should adjust this to your computer speed and personal

# preference.

#

redraw_interval_msec = 200

#

# Loader

#

#

# Boot method

#  this can be

#  1. "auto", prom will boot the first bootable partition found (default)

#  2. "select", prom will show you a list of bootable partitions

#  3. "force", prom will load and boot the local file prom_loadfile

#

prom_bootmethod = "select"

# Example of how to use "force":

#prom_bootmethod = "force"

#prom_loadfile = "test/yaboot"

#prom_env_bootpath = "disk"

#

# bootargs: don't change unless you know what you are doing

# machargs: set to "-v" to get a verbose startup

#

#prom_env_bootargs = ""

prom_env_machargs = "-v"

#

# This is needed if you want to boot Mac OS X

#

prom_driver_graphic = "video.x"

# This will adjust the position of the initial page table (don't change)

#page_table_pa = 104857600

#

# CPU Config

#

# Processor Version Register

# Defaults to 0x00088302

# Only change if you know want you are doing

#

#cpu_pvr = 0x00088302

#

# Main memory (default 128 MiB)

# must be >= 64 MiB

#

#memory_size=0x8000000

#

# IO Devices

#

#

# PCI IDE Config

#

# Drive type will be set according to file extension:

#  .img: Harddisk (filesize must be multiple of 516096)

#  .iso: CD-Rom

# Or you can override this by specifying the type via

# pci_ide0_master_type / pci_ide0_slave_type

pci_ide0_master_installed = 1

pci_ide0_master_image = "myHD.img"

pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 1

pci_ide0_slave_image = "D:\Isos\Applications\PearPC\os102.iso"

#pci_ide0_slave_image = "/dev/cdrom"

pci_ide0_slave_type = "cdrom"

#

# Network (unavailable on windows)

#

pci_3c90x_installed = 0

pci_3c90x_mac = "de:ad:ca:fe:12:34"

#

# USB

#

pci_usb_installed = 1

#

# NVRAM

#

nvram_file = "nvram"

i made my iso of the OS10.2 DVD and Panther CDs on my PC using Roxio Media Creator, and they all load fine.

When the install booted up, i went to Installer, Disk Manager, and erased my virtual disk and formatted as MAC OS something (not the journaled one), this was the 6gb file downloaded from their site. then i went back and went through the install as normal

install3.jpg

  • 0
Collaborator

Pixelwix

Posted
Posted

no there is no darwin installation needed you only need that to make the hdd for installing but you can just download the one off the site and use disk utility to format it

-click on the disk

-macos extended

- and erase, leave the name as is or it won't work

and install

This topic is now closed to further replies.
 Share
Go to question listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Amazon eero Pro 6E mesh Wi-Fi system 2-pack is 27% off

      By cork1958 · Posted

      Personally, I think these things are way over rated and way over priced, even at this price. I recently had Frontier Fiber installed with 2 of these devices and although they worked, I switched back to my own router and AP setup and get way better consistency on wireless speed than with Eeros. Wired speed seems to be more consistent also. Will be returning Eeros soon. I had told Frontier I didn't want them to begin with.
    • Microsoft is making Windows 11's context menus faster, simpler, and configurable

      By tboggs13 · Posted

      Yes, exactly what I have been thinking. Don't make the context menu simpler, make it smarter to learn what I actually use. And then, give me the ability to pin settings that I rarely use but need forget where they are.
    • Amazon Greenlights A New "Stargate" Series

      By Som · Posted

      https://www.change.org/p/save-the-new-stargate-series-let-martin-gero-build-the-future-of-the-franchise?utm_source=share_petition&utm_medium=mobileNativeShare&utm_campaign=share_petition&recruited_by_id=376d0b10-cf3c-11e7-a513-03b837c94000&recruiter=836653795&share_id=jVyr5PGfkN Petition for anyone who's interested 
    • Here's how to watch Summer Game Fest 2026 and what to expect from the 2-hour showcase

      By LoneWolfSL · Posted

      Here's how to watch Summer Game Fest 2026 and what to expect from the 2-hour showcase by Pulasthi Ariyasinghe The June game showcase schedule is packed, and with the Sony event already behind us, it's time for the next major presentation to come in swinging. Later today, Geoff Keighley will be bringing the 2026 edition of Summer Game Fest live from the Dolby Theatre in Los Angeles, California. For anyone wanting to tune in online, the Summer Game Fest showcase livestream will be kicking off at 2 PM PT | 5 PM ET | 10 PM BST later today, June 5. The jam-packed show is slated to run for about two hours, with platforms like YouTube (4K at 60FPS), Twitch, Facebook, or X being available for catching it. Like in previous years, separate streams featuring American Sign Language and Descriptive Audio are available on YouTube as well. Keighley has only dropped a few teasers about what gaming fans can expect to see at the show. This includes a new look at Star Wars Zero Company from EA, a major announcement from Guild Wars developer ArenaNet, more Clutch gameplay, and some sort of Sega presence. As for fan expectations, there is hype building about a Final Fantasy 7 Remake Part 3 reveal here, and we might see new details about announced games like Alien Isolation 2 as well. If you want even more games, keep in mind that right after the main kickoff event, the Day of the Devs showcase will begin its own festivities at 4 pm PT | 7 pm ET. This is focused entirely on upcoming indie games. Following this, the next major games showcase is slated to happen on June 7. Here, Microsoft is bringing the big guns with its Xbox Games Showcase and Gears of War E-Day Direct. Check out the full calendar for all of the June events over here.
    • Ladybird Browser is no longer accepting outside contributions thanks to AI

      By Reancarnation_X · Posted

      AI is destroying jobs like nothing before

  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular

  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      PsYcHoKiLLa
      262
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!