• 0

Running Mac OS X on x86 PC!


Question

Recommended Posts

  • 0
I think I may be slightly retarded...how do you turn on fullscreen? :s I'm using the Richard Goodwin Athlon XP optimized nightly build. I have went back and read other pages so I don't need the "use the search button" speech :p

*edit* I found on another PearPC page that the fullscreen toggle is F12, but it doesn't go fullscreen for me, it just lets me use the OS X cursor rather than the one in Windows :s

Unless something has changed, the nightly non-sdl builds do not support full screen yet, only networking.

  • 0
I'm having a problem copying files from my network drive to the Mac. I'm using Panther 10.3.4 with the bridging enabled in Windows. I can surf the net on the Mac, so I know everything is configured correctly.

I have found that it is works best to use FTP. In the sharing prefrence panel on the Mac VM, enable FTP sharing, then set a fold on the mac VM. In windows, go to "Network places" and add a network place. Type in "ftp://username:[email protected]" and then it will create a short cut to the Mac FTP share. I find the ftp much more reliable than the normal shares.

I have been able to transfer 100's of mb back and forth this way.

HTH,

Jon

  • 0
Does anyone have a link to that 3GB PREP Image file it seems the Install guide to 10.2 site is gone http://s87840517.onlinehome.us/pearpc.html . Anyhelp would be great thx.  :)

I have a mirror up for my guide ..did you check that ?

http://emon.aaronx.com/pearpc.html

yea I was over my 5 gb limit like within 20 days or so :wacko:

  • 0

Well guys remember you told me i had to start all over againg getting another image. The thing is that, that is what i did but now i have another problem

Look at the pic. I don't know wot it wrong but when i run ppc these apears

any ideas of why is these happening?

post-12-1086636057.jpg

  • 0
I have found that it is works best to use FTP. In the sharing prefrence panel on the Mac VM, enable FTP sharing, then set a fold on the mac VM. In windows, go to "Network places" and add a network place. Type in "ftp://username:[email protected]" and then it will create a short cut to the Mac FTP share. I find the ftp much more reliable than the normal shares.

I have been able to transfer 100's of mb back and forth this way.

HTH,

Jon

BTW,

can you name some FTP clients for Mac or is there already something integrated in OS X?

Another question: Is there something I have to respect when updating to 10.3.4 so my network will still work afterwards? I mostly use the latest SDL and the DirectX builds.

  • 0

i posted this on the last page on so far cant get it to work

i can view pearpc osx on the network on other computers but

dies anyone know if ms remote desktop for osx can on remote from osx to xp

or can i do xp to osx remote

i use remote desktop all the time on my laptop. I was thinking about doing a remote desktop from my laptop to my desktop both windows

but then i thought hey pearpc runs on the interent and my network now

so im trying to using the microsoft remote desktop program for mac osx to go from my laptop directly to mac os in pear do u think it will work

i will post a pic once i get it working

  • 0
BTW,

can you name some FTP clients for Mac or is there already something integrated in OS X?

Another question: Is there something I have to respect when updating to 10.3.4 so my network will still work afterwards? I mostly use the latest SDL and the DirectX builds.

I don't use an FTP client in OS X, I do all the FTPing from the windows side. If I need to get something out of Pearpc, I put it in the shared folder and pull it from the PC side.

  • 0
Does anyone know what's wrong? I'm using this guide: http://emon.aaronx.com/pearpc.html.

Could it possibly be my image? I converted it from .CDR to .BIN to .ISO, but the size of the image matches the guide's almost exactly.

hmm .. boot off the install CD (CD 1) and run disk utility. See if it finds any drive .. if it does then run "Repair disk" on it.

  • 0
Could it possibly be my image? I converted it from .CDR to .BIN to .ISO, but the size of the image matches the guide's almost exactly.

Why dont you create an .iso image straight from your Mac OS X CD/DVD?

Then you could be sure that the image is valid! ;)

  • 0

Could someone help me?

I had to atart everything again, like you guyd told me to do. Now I can't run it because i don't know what problem is coming out.

Any tips ideas, please something i want to run OS X 10.2 on my XP, please! Please

Ok Look at the pic and tell if you know what is wrong or if i'm using the right version, and what should i do

post-12-1086738477.jpg

  • 0
I have found that it is works best to use FTP. In the sharing prefrence panel on the Mac VM, enable FTP sharing, then set a fold on the mac VM. In windows, go to "Network places" and add a network place. Type in "ftp://username:[email protected]" and then it will create a short cut to the Mac FTP share. I find the ftp much more reliable than the normal shares.

I have been able to transfer 100's of mb back and forth this way.

HTH,

Jon

My "Add a network place" function, doesn't work. When I start it, it searches infinitely, without finding anything. This is very odd.

But shouldn't it also work, the other way round, making my host PC a FTP server, so I could access the files from my Mac VM?

Does any of you know, if there's a freeware FTP client for Mac OS X out there?

  • 0

OMG! I just figured out a way to make applications load MUCH faster!

Just set the dock to auto-hide. Apparently those little bounces take up a LOT of CPU time. It used to take programs like Thoth and Fetch over 30 seconds to start. Now they load in just 5 seconds or less.

Also, I think the long term implication for this is that pearPC will get a HUGE speed boost if it can figure out how to directly access the graphics card for drawing objects on screen.

  • 0

can anyone tell me why i can't change my resolution in the sdl build of ppc?! here's my config:

#ppc_start_resolution = 4

#fs_refresh_rate = 60

redraw_interval_msec = 40

prom_bootmethod = "select"

prom_env_bootargs = ""

prom_env_machargs = ""

#prom_driver_graphic = "video.x"

memory_size=0x10000000

pci_ide0_master_installed = 1

pci_ide0_master_image = "macosx_6gb_unjournaled.img"

pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 1

pci_ide0_slave_image = "macosx.iso"

pci_ide0_slave_type = "cdrom"

pci_rtl8139_installed = 1

pci_rtl8139_mac = "de:ad:ca:fe:12:34"

pci_usb_installed = 1

nvram_file = "nvram"

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • That reminds me. Now that i have Quest 3 I should go back and try the first one in VR. ... last time i did that I tried it in some janky VR setup which was still really good.
    • It's amazing that anyone still uses this bloated trash.
    • @Sayan...I have defended you at various points as I hope you know. This headline however is utter trash...shame on you sir!
    • An actual cosmic "Eye of Sauron" had been looking straight at us all along by Sayan Sen Image by Kovin P. Vasquez via Pexels | Not representative An international team of researchers has solved a long-standing mystery surrounding a distant blazar known as PKS 1424+240, helping explain why it produces some of the brightest high-energy gamma rays and cosmic neutrinos ever observed despite appearing to have a relatively slow-moving jet. The findings were published on June 6 in Astronomy & Astrophysics Letters. The study addresses a broader challenge in astrophysics: understanding how extreme cosmic objects accelerate particles to very high energies and produce very high-energy (VHE) photons and neutrinos. PKS 1424+240 is located billions of light-years from Earth. It has attracted attention for years because it is both a powerful source of VHE gamma rays and the brightest known neutrino-emitting blazar in the sky, according to observations by the IceCube Neutrino Observatory. It is also associated with one of the strongest peaks in IceCube's nine-year neutrino sky map A blazar is a type of active galactic nucleus powered by a supermassive black hole that pulls in surrounding matter and launches jets of plasma moving close to the speed of light. What makes blazars unique is their orientation. One of their jets points almost directly toward Earth, making them appear exceptionally bright across the electromagnetic spectrum and allowing scientists to study some of the most extreme physical processes in the Universe. The scientists exclaimed it's like the 'Eye of Sauron' in deep space. Usually, the brightest gamma-ray-emitting blazars are expected to have jets that appear to move very quickly. However, radio observations of PKS 1424+240 suggested that its jet was moving much more slowly, creating a contradiction that became part of a long-running problem known as the "Doppler factor crisis." To investigate, researchers analyzed 15 years of observations from the Very Long Baseline Array (VLBA), a network of 10 radio antennas spread across the continental United States, Hawaii and St. Croix. Using a technique called Very Long Baseline Interferometry (VLBI), astronomers combine signals from widely separated radio telescopes to create a virtual Earth-sized telescope capable of revealing extremely fine details. The team combined 42 polarization-sensitive radio images collected between 2009 and 2025, creating a much deeper and more detailed view of the jet than had previously been possible. The observations were carried out as part of MOJAVE (Monitoring Of Jets in Active galactic nuclei with VLBA Experiments), a long-running program that studies the brightness, polarization and magnetic field structures of jets produced by active galaxies. The project aims to better understand how activity near supermassive black holes is linked to high-energy radiation and neutrino emission. “When we reconstructed the image, it looked absolutely stunning,” said Yuri Kovalev, lead author of the study and Principal Investigator of the European Research Council-funded MuSES project at the Max Planck Institute for Radio Astronomy. “We have never seen anything quite like it — a near-perfect toroidal magnetic field with a jet, pointing straight at us.” The image revealed an unusual geometry. The researchers found that Earth lies almost directly in line with the jet, with a viewing angle of less than 0.6 degrees. In simple terms, astronomers are looking almost straight down the jet. This turned out to be the key to the mystery. Because the jet is aimed almost directly at Earth, a relativistic effect called Doppler boosting dramatically increases its apparent brightness. The study found that this effect boosts the emission by a factor of about 30 while also making the jet appear slower than it actually is. “This alignment causes a boost in brightness by a factor of 30 or more,” said Jack Livingston, a co-author at the Max Planck Institute for Radio Astronomy. “At the same time, the jet appears to move slowly due to projection effects — a classic optical illusion.” The nearly head-on view also gave scientists a rare look at the jet's magnetic field. Using polarized radio signals, they detected a clear toroidal, or doughnut-shaped, magnetic field component. The observations suggest the jet carries an electric current and that its magnetic field helps launch, shape and stabilize the flow of plasma. Researchers believe this magnetic structure may also play a key role in accelerating particles to energies high enough to produce both gamma rays and neutrinos. “Solving this puzzle confirms that active galactic nuclei with supermassive black holes are not only powerful accelerators of electrons, but also of protons — the origin of the observed high-energy neutrinos,” Kovalev said. The research was conducted under the MuSES (Multi-messenger Studies of Energetic Sources) project, which investigates how active galactic nuclei accelerate particles and generate different cosmic signals, including light and neutrinos. Scientists say understanding how protons are accelerated and linked to neutrino production remains one of the major unanswered questions in astrophysics. The findings help explain why some blazars can appear to have slow jets while still producing extremely bright high-energy emissions. More broadly, the study strengthens the link between relativistic jets, magnetic fields, gamma rays and high-energy neutrinos. Researchers say the results provide new clues about how some of the Universe's most powerful natural particle accelerators work and offer important insights for multimessenger astronomy, which combines different types of cosmic signals to study extreme events in space. Source: European Research Council, EDP Sciences This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      510
    2. 2
      PsYcHoKiLLa
      273
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      72
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!