• 0

Running Mac OS X on x86 PC!


Question

Recommended Posts

  • 0

I have a question, if I want to try a different build of pearpc do I have to reinstall osx?

One more I use a router to connect to the net, is it any different getting osx to see the router?

  • 0

I have this working with a router. IP Addresses:

BEFW11S4 Router:

IP: 192.168.1.1

Netmask: 255.255.255.0

DNS: From ISP

WUSB11 USB Wirless Adapter:

IP: 192.168.1.7

Netmask: 255.255.255.0

Gateway: 192.168.1.1

DNS: From ISP

ICS Enabled

TAP Win32 Driver:

IP: 192.168.0.1

Netmask: 255.255.255.0

Gateway: 192.168.1.7 (If putting the adapter address doesn't work try leaving this blank)

DNS: From ISP

OS X:

IP: 192.168.0.20

Netmask: 255.255.255.0

Gateway: 192.168.0.1

DNS: From ISP

Two problems: 1) PearPC must be run as an admin 2) One time I would lose all internet connectivity when OS X connected. I had to turn off then turn back on ICS on the Wireless adapter.

PearPC .3pre running 10.3.4 on Windows XP Pro

  • 0
no, you dont have to reinstall osx, just replace the ppc.exe file with the new one you download.

if you use a router you will not be able to use the ICS method as you will have a conflicting IP address with your router and thus screwing your net connection.

Dude, i have a router and thus far have had zero problems.

Maybe you should try changing your router's LAN address to something other than 192.168.0.x :D

I have my subnet set to 192.168.21.x for example. No problems whatsoever.

  • 0

well i really cant do much on the internet now in pearpc. For some reason when i try to go to network conncections in xp it says there is no file/association for network connections. I need to get in there to tweak my bridge settings. Anyone got a clue on how to fix that

  • 0
Dude, i have a router and thus far have had zero problems.

Maybe you should try changing your router's LAN address to something other than 192.168.0.x :D

I have my subnet set to 192.168.21.x for example. No problems whatsoever.

My friend is having trouble with his router, could you explain how to change the Router's IP?

  • 0

I'd like to know that to, whenever I change my router's IP address I loose my internet connection and I can't access the router's HTML configuration screen.

  • 0
My friend is having trouble with his router, could you explain how to change the Router's IP?

Well, without knowing what router it is, I would say open a web browser and type in the router's ip. Login, and find the screen that allows you to change the router's IP.

  • 0
Dude, i have a router and thus far have had zero problems.

Maybe you should try changing your router's LAN address to something other than 192.168.0.x :D

I have my subnet set to 192.168.21.x for example. No problems whatsoever.

y would you need a subnet at home :s ??

  • 0

you dont need a subnet for tcp/ip like the 1 u have for home unless you have heeps of computers and dont what them to always talk to eachother?? 255.255.255.0 is fine y would you need something other than that for home use unless you where trying to learn certain things about subnets

  • 0

^^^

Somebody needs a refresher course in TCP/IP Networking. :rolleyes:

A subnet is a group of computers with similar IP addresses. All the computers on my local network, for example, are on the subnet 192.168.21.xxx . This means that I have to assign them an IP address in the range of 192.168.21.1 ~ 192.168.21.254. You cannot use 0 and 255; those are reserved for routing traffic.

A subnet mask is a mathematical expression of how many IPs you plan to give out in a particular subnet. The typical mask is 255.255.255.0. Sometimes you can set them to 255.255.255.128, or .64, or .32, etc... The full explanation is very technical and way beyond the scope of this thread.

Click here for a nitfy subnet calculator that might explain it a little better.

And Webopedia.com has a nice entry for "Subnet Mask."

As for those of you who want to change your router's LAN address, the procedure will be different for each manufacturer.

The procedure is basically this: You need to access the router's configuration page by opening your browser and pointing your browser to http://192.168.x.1, where x will be your IP address "class C." Look at your own IP address to get this number. Most routers ask for a username and password at this point. If you have no idea what to do here, try admin in either the username or password fields. Or try it in both. If that doesn't work, consult your router's manual. Next, you'll be looking for the LAN configuration. You'll want to change the LAN (not WAN) address to 192.168.Z.0, where Z some number OTHER than 0, 1, or your current LAN address.

  • 0

I had PearPC working just fine, then I wanted to update my build and connect to the internet. First off, I need a tutorial for the internet connection, I went back as far as page 170 then got tired of looking. Secondly, I replaced my exe for the 0.2 build with the 0.3 SDL and added the SDL.dll to my folder, but now when I click on the ppc.exe or the ppc.bat, i just get a quick flash of a cmd prompt box then it dissapears and nothing happens. I tried my old exe and still nothing, I just cleaned up my ppcfg_HD.txt as well, so that could also be my problem, and suggestions??

This is my config file

# PearPC Configuration File

ppc_start_resolution = 5

redraw_interval_msec = 50

prom_driver_graphic = "video.x"

cpu_pvr = 0x00088302

memory_size=0x10000000

prom_bootmethod= "auto"

prom_env_machargs= "-v"

pci_ide0_master_installed = 1

pci_ide0_master_image = "D:\pearpc\PantherImage.img"

pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 0

pci_ide0_slave_image = "D:\pearpc\OSX_CD1.iso"

pci_ide0_slave_type = "cdrom"

pci_3c90x_installed = 1

pci_3c90x_mac = "de:ad:ca:fe:12:34"

pci_usb_installed = 1

nvram_file = "nvram"

  • 0

On a more 'PearPC' related front, here's a development update.

For the last few days, CVS was being reorganized (and thus no one could make any new additions). That is complete; SDL is now in CVS, however the mouse is screwed up. There has been talk of adding the 'suspend' feature, dual emulated processors (for smp machines), and writing an AGP driver for OS X on the PearPC mailing list over the last few days ;-).

Hopefully soon we'll start getting compiling + functional builds out of CVS again :-).

  • 0
On a more 'PearPC' related front, here's a development update.

For the last few days, CVS was being reorganized (and thus no one could make any new additions). That is complete; SDL is now in CVS, however the mouse is screwed up. There has been talk of adding the 'suspend' feature, dual emulated processors (for smp machines), and writing an AGP driver for OS X on the PearPC mailing list over the last few days ;-).

Hopefully soon we'll start getting compiling + functional builds out of CVS again :-).

Wow thats freat news! :D

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, Hope all is well. I am in UK.  
    • I'm not happy with myself for it, but I've gone and got hold of it. Just another 45 minutes and I'll be Bond, James Bond. In my defence, IO's Hitman series is awesome, and I'm a sucker for 007. So while it might seem a bit simplified compared to Hitman, I'm sure I'll be right at home.
    • Or just check the script yourself ^^. I hate having a Microsoft account tied to my windows install.
    • 007 First Light review: Satisfying spy adventure that James Bond needed by Pulasthi Ariyasinghe I have fond memories of classic James Bond games from the Electronic Arts era. Using high-tech gadgets, sneaking into parties, and dispatching bad guys were wildly exciting activities for my younger self. In recent years, Bond games have entirely disappeared, alongside the super spy genre. Fast forward to 2020, imagine my surprise when IO Interactive announced it had secured the Bond IP to make a game. Considering the studio’s Hitman history, this project is one I keenly kept an eye on. Six years later, 007 First Light is finally here, and after spending time inside this globe-trotting adventure, I can safely say that my excitement for this developer’s take on this universe was not unfounded. IO has taken lessons it has learned from Hitman and combined them with what I would expect from a directed cinematic experience like James Bond. I have refrained from mentioning major plot points to save you from story spoilers in this review. This is an original story that doesn’t tie into any movies, so there isn’t an expectation of knowing the backstory or the decades of movies either. Bond, James Bond When 007 First Light begins, Bond is just Bond. There isn’t a spy angle, fancy gadgets, or even a secret mission. The introductory mission is framed to show how James Bond handled himself and how he does not care about the odds when it comes to saving lives. It’s a gorgeous level as well, showing off an island scattered with cliffs in the middle of a storm. Looking back, this is probably the best-looking level in the game, with IO showing off all its abilities with its custom engine, Glacier. But my favorite ended up being the follow-up to this level. Once the United Kingdom's foreign intelligence agency, MI6, recruits our daring youngster into its super-spy “00” program, training begins. However, instead of treading through the same tutorial missions where the game teaches you to run and jump and drive, IO opted for a montage, and it’s amazing. The scenes cut between Bond practicing and improving his marksmanship, parkour, hand-to-hand combat, and driving as weeks go by in his training. What impressed me here was the lack of any loading screens or stutters as scenes instantly switched to different locations entirely, as if I was watching a movie. This creativity is a trend I noticed in most levels, where there is some sort of gameplay or choreography mechanic being introduced to keep things interesting. Soon, the rest of the cast is introduced, bringing other agents that our favorite secret agent will be working with, the scientists and engineers that build MI6’s spy gadgets, as well as higher-ranking officers that either appreciate or (at best) tolerate Bond’s rebellious attitude. It’s a tight cast, all with incredibly good voice acting and personalities that quickly grew on me. The casting for Bond himself is also an excellent one. From showing his iconic soft spot for women to the condescending smiles that get a rise out of enemies, I had no issues getting immersed into this universe as this new face of James Bond. The missions take place in a wide range of locations as MI6 sends Bond to tackle dangers that are growing everywhere from the UK to Africa. These aren’t unrelated adventures where MI6 is sending secret agents, which is an angle I would love to see in another game, but a part of a bigger conspiracy affecting the entire world. Some of the twists and turns were all too predictable, and the character that Lenny Kravitz played made me cringe a little too much. But all in all, I enjoyed the campaign’s storyline that sets the stage for this new agent joining the illustrious “00” program. Plenty of Possibilities The third-person style of IO Interactive fits this role quite well. Bond is presented as a master at hand-to-hand combat as well as firearms, while also having a knack for being stealthy when required. Most sections of missions have a lot of freedom. This means I could beat up every goon and security guard on the way to an objective, slip past them without sounding a single alarm, or do a mix of both. My sessions usually end up with the third option because I tend to be impatient about waiting for a patrol to move. Drawing from its Hitman genes, the developer almost always gives multiple routes for going through missions. Levels can be massive, sometimes sporting hundreds of NPCs going their own ways and having conversations. If my objective is to break into a security room on the third floor, I could look around for roof access, eavesdrop on conversations to find out where someone lost a key, create a distraction and pickpocket a guard for a keycard, sneak in through the vents, or simply kick down the offending door. I enjoyed the variety on offer, especially because the same solutions didn’t usually show up in different missions. Before heading out into a secret MI6 escapade, the gadget specialist of the branch walks Bond through the organization's latest and greatest achievements. This can be cool little devices like a laser built into the watch, a phone that fires poison darts, or a camera that emits a powerful shockwave. The choice of what can be taken into the mission is up to the player. I could usually find fresh routes or get out of tough situations with a punch or two, so I never had the feeling of missing out by not choosing the right equipment. It’s still a fun practice. Choosing the armaments before a mission enhanced the super spy feeling quite a bit. As I mentioned, stealth comes in as a very viable option for most of the missions, letting Bond sneak past foes or knock them out silently. While it is satisfying to clear entire areas of goons and walk away without any alarms, the way of accomplishing this could have been done better. Bond can lure enemies, sneak up and knock them out, or use a gadget to disorient them before dealing a nasty blow. Bodies cannot be moved or hidden afterward either. It’s a very simple system, which I wish were more exciting to pull off. Perhaps more stealth-orientated gadgets, distraction options, or multi-takedowns could have helped here, I think. Getting caught while attempting to be in stealth does not mean a game over. Other than getting into a fist fight, an interesting twist of 007 First Light is the bluffing option. While an enemy is confused as to what you are doing in a restricted location, Bond has the option to improvise and persuade them that you are exactly where you’re supposed to be. These are fun little dynamic interactions with unique dialog depending on the mission and location, giving a few extra moments for Bond to go past suspicious guards smoothly. It’s the first time I’ve witnessed this system in a game, and I hope to see more. License to Kill Bond isn’t just dealing with security guards or civilians. From time to time, entire gangs of gun-toting mercenaries show up in levels looking to take down our protagonist. It is then that License to Kill mode is activated for Bond, letting him use firearms with no restrictions. I was surprised by just how tight gunplay is in 007 First Light. The weapons feel powerful and satisfying to fire, with single bullets capable of taking down an enemy with a headshot. Ammo is scarce, and enemies don’t drop weapons with full magazines most of the time. This forces a hectic kind of gameplay where I am always advancing towards enemies to take their weapons after they are downed. Things like shooting legs to immobilize, aiming at the hands to make their weapon go flying, blowing up nearby fire extinguishers for cover, and using gadgets to halt a goon in their tracks while I reload, make up enjoyable levels. I had to hold back my disappointment when the enemy count in these action sequences dropped to zero and I had to go non-lethal again. Speaking of action sequences, First Light isn’t just offering sandbox levels to complete at the player’s own leisure either. Each level comes with specific linear and directed scenes to move the story forward and put Bond in tight situations. These usually end up with high-octane chases or driving sections, offering the chance to witness chaining explosions, hails of gunfire, and scripted parkour scenes that remind me of Mission Impossible movies more than Bond. Elements like seeing James Bond jump out of a plane without a parachute or drive through buildings in London inside a trash truck were fantastic and always left me at a high point when finishing a mission. The classic James Bond theme is sprinkled in here too, which only happens a handful of times in the game, but at just the right moments. Visuals and Performance Compared to Unreal Engine 5 games we are seeing nowadays, 007 First Light isn’t flexing a huge amount of realism when it comes to graphics. The models, textures, and effects all feel a little dated, with the starting mission that I mentioned being the most visually striking. However, the complete lack of stutters, the hundreds of NPCs that can be on screen without a single hitch, massive sandbox levels, and smooth transitions between them all play a part in making this an immensely immersive and complex experience. The in-engine cutscenes are gorgeous as well, offering an upgraded visual style and model detail over the gameplay sections. Animations are one aspect that jumps out at me about any new game, and First Light has nailed what a third-person action game should feel like. Walking, sneaking, and running all have a heaviness to them that I appreciate. Whenever Bond moves past a wall or a ledge, his arms reach out to lightly hold those structures until he moves away. NPCs actually react to my character and move out of the way. Even during melee combat or takedown animations, the fists impacting a body or a head hitting a wall all have that same weight. Even the more frivolous animations, like catching a gun in midair or chucking an empty one at a goon (yes, you can do that), are satisfying to pull off. Of course, the in-engine cutscene animations are remarkably well done too, with facial animations and the upgraded model details improving my engagement with the characters. I have an AMD Radeon RX 9070 XT 16GB paired with an eight-core Ryzen 7 3700X and 32GB of RAM, with the game running at 1440p resolution. Deciding to completely max out all the graphics options gave me a range of frame rates between 60 and 100 depending on the scene and level. While I did try to enable AMD FSR, which bumped up the frame rates by a good 20% at Quality mode, IO Interactive’s implementation of the technology wasn’t that great. Every corner and edge in levels began shimmering, and I was also seeing smearing issues in fast-moving sections. The title seemingly uses the older generation FSR 3.1 and not the machine learning-assisted FSR 4, leading to these artifacts. Unfortunately, there isn't a way to manually upgrade this right now either. I opted to turn off the upscaling and play the game in native 1440p to avoid problems. I would say the FPS range I was getting was an acceptable one for a single-player action game for my setup. I do wish there were an FOV slider option in the settings. While the camera is far enough back for my tastes in most situations in this third-person adventure, at times the perspective is far too close. When trying to look around quickly and spot targets, I realized I was getting a slight headache at times due to the use of an almost over-the-shoulder close-up camera. Conclusion Being James Bond in 007 First Light is a treat. Traveling around the world chasing conspiracies, using high-tech gadgets disguised as everyday accessories, and improvising on the spot to fool foes all give a fantastic feeling of being a super spy. For an origin story, IO Interactive has done a great job at introducing the character and his motives for doing what he does. The satisfying combat animation and fantastic voice acting are definitely high points, with the License to Kill moments being my favorite. Not being able to move bodies and the simplistic stealth of mechanics does hurt its presentation a little. The NPC logic and intelligence is easy to manipulate and trick, repeating the same actions over and over again if I keep making distractions. The lack of an FOV slider was also a pain (quite literally) at times, and the FSR implementation is quite poor. These are things I hope the studio will improve upon with updates. Even with its faults, IO Interactive and James Bond are a match made in heaven. The studio knows how to make a main character that oozes charm and competency while also leaning heavily into its Hitman experience to make gigantic levels with what looks like hundreds of NPCs roaming around. Being an origin story, IO’s Bond has a way to go before he becomes the highly effective agent we see in the movie world. I am hoping the studio will continue this series alongside its Hitman ventures going forward, just so we get to experience the journey for longer. 007 First Light is available on PC (Steam, Epic Games Store, and Xbox PC), Xbox Series X|S, and PlayStation 5 for $69.99. This review was conducted on the PC version of the game provided by IO Interactive.
  • Recent Achievements

    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      271
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!