[Review] Logitech z-5500


Recommended Posts

Says in the first post, $359 CAD.

Either way, nice speakers, crappy monitor though.  :D

584731230[/snapback]

Yea I know. I only use thsi one when my dad is home tho. I use his when hes gone. 19" Samsung LCD :D

Im saving for a Car and a 23" LCD :D

The Y splitter isn't the best solution but if you get a good quality one such as a monster cable (around 20$ CAD)  then it will do just fine.

584728303[/snapback]

That's also cause of Creative's proprietary digital out connector.

If you have Coax out then it's not an issue. RCA Coax SPDIF is technically better than Optical SPDIF however you wouldn't notice the difference anyway.

It won't? Thats new to me. Receiving a weaker signal degrades quality. Its evident using any audio source.? You're completely wrong.

584726363[/snapback]

No, you're completely wrong. Both are a digital signal and therefore of equal grade. You are seem to be thinking digital works somewhat like analog which it doesn't. The Coax RCA digital input and the optical digital input both receive the exact same data and being that it is digital the interference of either is almost nill.

Oh and I can't quite figure out why anyone would want to use a Y splitter for a digital cable. That seems like using pliers to nail a nail in; it'll work but it's just the wrong tool. What I did was buy a minijack (3/8ths) to female RCA converter and used a male to male RCA cable to my coax digital input and that works great on my Boston Acoustics system. Of course the ideal solution would be to use a minijack to RCA male cable and avoid buying a converter, but that may be hard to find.

Also, a note on signal quality. Splitting a digital signal will not degrade it. Remember, it is a digital signal and therefore will not work unless an entire signal packet is received. Digital signals don't depend on the strength of a signal to transfer amplitude (loudness level) or quality. If a digital signal is weak you will get nothing and therefore hear nothing. So, if you hear anything then it works just fine.

Nice review, however I have two questions. Firstly, the z-680 speakers are infamous for the hiss produced by the speakers and since the z-5500 are basically upgraded versions of the 680's I was wondering if your speakers produce any white noise at all. And secondly I was wondering if there were any other reviews out there on the net on these speakers.

Nice review, however I have two questions. Firstly, the z-680 speakers are infamous for the hiss produced by the speakers and since the z-5500 are basically upgraded versions of the 680's I was wondering if your speakers produce any white noise at all. And secondly I was wondering if there were any other reviews out there on the net on these speakers.

584752068[/snapback]

That was fixed in a later revision for the Z-680s, if you hold down input and settings -- it'll display the firmware. It was fixed with firmware 1.1.2..

I can assure you, that if you go buy the Z680s, you will have 1.1.2

anyone know what i need?

584753612[/snapback]

A 3.5MM MiniJack to RCA Y-Splitter.

And for the other question. Ther eis a hiss at high volume but that is normal on speakers. Almost, if not all speakers do that. Its not very noticable. God the audigy makes these speakers less good. God damn audigy. Me wants M-Audio.

And for the other question. Ther eis a hiss at high volume but that is normal on speakers. Almost, if not all speakers do that. Its not very noticable. God the audigy makes these speakers less good. God damn audigy. Me wants M-Audio.

So the hiss is only noticeable at high volumes? Not at low volumes right?

Hey my first post. Just a few questions.

I want to get a speaker system hookup for my ps2 and dvd player. i just dont know enough about hooking up so il ask these questions.

1. since these speakers dont use speakerwire how long are the cables that come with them, liquid gave 25' as the length for the rear channels. is that in feet? and how long are the wires for the front channels

2. Also is possible to hook a av reciever to this system.

3. how do you use the surround sound feature, from dvds and video games off the ps2 or a dvd player.

4. would you recommend using the z-5500 for a home theather system?

Hey my first post. Just a few questions.

I want to get a speaker system hookup for my ps2 and dvd player. i just dont know enough about hooking up so il ask these questions.

1. since these speakers dont use speakerwire how long are the cables that come with them, liquid gave 25' as the length for the rear channels. is that in feet? and how long are the wires for the front channels

2. Also is possible to hook a av reciever to this system.

3. how do you use the surround sound feature, from dvds and video games off the ps2 or a dvd player.

4. would you recommend using the z-5500 for a home theather system?

5. how would i try to hook up my tv to the system. I do have a headphoen jack in the front of the tv but i was hoping their was a alternate option.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I sort of agree with you on that. I had a telescope - a real hefty thing, although only around 500CHF - that got me so fascinated about the stars and planets. I would stare for hours, amazed that I could see the craters of the moon or the rings of Saturn in "realtime" (quotations because, y'know, speed of light and whatnot). A friend of mine has a telescope like the one mentioned in the review, and the pictures are amazing to look at. But there is something missing for me. I may as well just go to NASA's website and look through their gallery.
    • As opposed to catching bad press because it's the engine's fault? You didn't really think this through did you? lol. The engine has all the tools a dev needs to optimize their game, Epic isn't gonna hold their hand to make sure they use them. Also, Epic isn't forcing anyone to use Lumen, Nanite or super high resolution meshes and textures. Just because Nanite can render meshes with millions of polygons doesn't mean you should use it like that, in fact, Epic recommends you avoid doing that. Most of the stuttering can easily be fixed by cutting down on unique shaders by using master materials and generating a PSO cache and compiling every shader before loading the game and managing what must be loaded and unloaded at runtime, it's up to the developer to set all that up properly.
    • I think it depends on what you're looking for to do, and the time you have to spare. With my Dwarf 3, I easily spend 3-4 hour sessions; half an hour driving to an un-light polluted place, another half hour unpacking and setting up the smart scope + tripod for equatorial tracking, then 15 more minutes mucking around with settings and shooting calibration frames, spending a few hours shooting, merging with past photo sessions, etc. It's crazy how time flies and I often get home later than I expected. It's something I still need to set aside a good part of an evening to do, all in all. For one session, where you often need like four for best results when it comes to deep space objects. Even with a smart scope like Dwarf 3, regular non-astro photography is still way more approachable to people getting into photography. I find this is a time consuming niche no matter how I go about it. With practice, I can probably begin cutting time here but I think where smart scopes find their home is among people who love to shoot the night sky but don't have the spare time to go deep with the "navigator level" attunement to the night sky itself in addition to everything else. Having said this, _if_ you have even more time to spend on this hobby, it will probably be even more rewarding to do it more by hand and learn the skies and the details of how it all works.
    • I misread the title and thought Teams itself would be redesigned. Imagine having this one as a native WinUI app.
    • Dell, HP PCs ran into endless reboot, BitLocker recovery loops but Windows 11 isn't to blame by Sayan Sen Last month Neowin reported on a major issue on Dell systems wherein a bug in its official support tool was leading to endless blue screen of death (BSOD) and restarts. Following our report, Dell officially acknowledged its SupportAssist-related crash issue, confirming that the culprit is not Microsoft's operating system but rather a faulty version of its own remediation software. In a newly published support advisory, Dell stated that version 5.5.16.0 of Dell SupportAssist Remediation and Alienware SupportAssist Remediation can trigger blue screen errors and unexpected system restarts. The company notes that the problematic component operates independently of the main SupportAssist application, meaning users should not remove the primary SupportAssist software when troubleshooting the issue. According to Dell, the crashes are linked specifically to the SupportAssist Remediation service, which is bundled with SupportAssist OS Recovery Tools, and as such it has since released an updated version, 5.5.16.1, which is said to resolve the problem. Affected users are advised to first verify whether version 5.5.16.0 is installed by checking the Installed Apps section in Windows Settings. If so, Dell recommends updating SupportAssist OS Recovery Tools through either SupportAssist's "Update Software" feature or Dell Command Update. Dell also advises users to back up important data before performing the update and to ensure systems remain connected to power throughout the installation process. If you are still having issues though make sure to report to the Dell support forum. As it turns out though Dell is not the only PC maker currently dealing with update-related headaches as HP is also facing a separate but probably equally frustrating issue involving recent Windows Secure Boot updates that were released with recent Windows 11 Patch Tuesdays. Similar to Dell, HP also put up its own support article where it explains the issue. The company says that affected devices could hit a brick wall when booting as they run into a BitLocker recovery loop after the April 2026 updates. The problem appears to affect systems wherein the new UEFI Secure Boot CA 2023 certificates fail to apply properly. As such affected users will find themselves entering their recovery key over and over again despite the system otherwise functioning normally. HP says such PCs should be updated to the latest available BIOS version and configured with the necessary Secure Boot certificates before installing Microsoft's Windows 11 Patch Tuesday updates. Systems that are already experiencing the problem may require BIOS configuration changes to restore normal boot behavior. Admins can find information regarding that in the support article here on HP's official website.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      246
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!