[Review] Logitech z-5500


Recommended Posts

Chances are there is an issue with the way you setup the speakers that you are unaware of.

I know you may not want to, but reading this thread will almost surely give you all the help you need to fix whatever problem you may encounter now or in the future.

So much has been discussed on these speakers that it's worth reading through to get a full scope of it all.

Grab a drink and some chips and relax and give this thread a good read.

Chances are there is an issue with the way you setup the speakers that you are unaware of.

I know you may not want to, but reading this thread will almost surely give you all the help you need to fix whatever problem you may encounter now or in the future. 

So much has been discussed on these speakers that it's worth reading through to get a full scope of it all.

Grab a drink and some chips and relax and give this thread a good read.

586412067[/snapback]

well i have pretty much gone thru the thread but trhere doesnt seem to be anyone here who uses sstorm or is familiar with my problem:(((( im gonna calll tech support today but would be great if someone can help me out asap as im getting frustrated by the day thanks

well i have pretty much gone thru the thread but trhere doesnt seem to be anyone here who uses sstorm or is familiar with my problem:(((( im gonna calll tech support today but would be great if someone can help me out asap as im getting frustrated by the day thanks

586412815[/snapback]

I'm thinking it's an install issue, i would disconnect every single wire of your system and redo it very very very carefully. if the connections arent made properly the system will not be able to perform 100%. make sure everything is unplugged and do the connections for the 5 speakers to the back of the subwoofer first, then the control pod to the sub, then the signal wires to the computer, then plug it in for power, then re check your work carefully, make sure everything seems perfect. then plug in the power cord to the outlet, then switch the power on from the back of the sub.

something I'd recommend is to buy Speaker Pins from a electronic store to make sure you're making the best connection possible. those speaker wire cables have got to go in as far as they can.

Once you've done the install like that, test the speakers with various inputs to see how they respond, inputs from your computer, then a cd player, then a laptop or something, do as much trouble shooting as you can.

once you've done all that if the speakers still have problems call logitech tech support and let them know of all the troubleshooting you've done and get their advice on what to do next.

I just got some Cambridge Soundworks Microworks speakers. They are pretty mcuh the best speakers I've ever had, and they're very affordable at 150 dollars.

The best part is the bass - it's not pounding, and it's not overdone - it's very, very "organic" sounding and it never is like DUMP DUMP DUMP DUMP but really just complements the song. It's very accurate.

  • 3 weeks later...

What The H......

I bought mine here in Japan and I just got one question....

why do the audio connections for the satellite speakers located at the rear panel of my woofer come in ordinary speaker wires? Ive noticed others have RCA color-coded interfaces..

Given the type of interface I have, are there any alternative wires/cables I could use which are better than normal speaker wires

Appreciate any help

What The H......

I bought mine here in Japan and I just got one question....

why do the audio connections for the satellite speakers located at the rear panel of my woofer come in ordinary speaker wires? Ive noticed others have RCA color-coded interfaces..

Given the type of interface I have, are there any alternative wires/cables I could use which are better than normal speaker wires

Appreciate any help

586498495[/snapback]

Older revisions used RCA wire. newer ones use Normal Speakerwire. The wire included is good enough.

someone help please

i am to buy these speakers (costing 700$ (us) here in india) anyways, which card should i go for

i heard audigy zs 2 (non plat) got some cox issue or something, another card i am considering is X-mistique

please recommend me a setup with least amount on work, and "extra" purchases

someone help please

i am to buy these speakers (costing 700$ (us) here in india) anyways, which card should i go for

i heard audigy zs 2 (non plat) got some cox issue or something, another card i am considering is X-mistique

please recommend me a setup with least amount on work, and "extra" purchases

586508532[/snapback]

go for the x-fi platinum if u can offord it...sound is amazing paired with the z-5500s

  • 2 weeks later...
someone help please

i am to buy these speakers (costing 700$ (us) here in india) anyways, which card should i go for

i heard audigy zs 2 (non plat) got some cox issue or something, another card i am considering is X-mistique

please recommend me a setup with least amount on work, and "extra" purchases

586508532[/snapback]

Woah , i got the Same Z550 for my brother for 510$ , where are you getting yours from

( from India only , New Delhi , Nehru Place )

  • 2 weeks later...

Yeah, no song info or anything. Just the output, and the codec

I have had these speakers for around 6 months and just last night I noticed a rather large crackle from the right rear speaker, you can hear it standing right away from it and you can hear it with the volume turned down. However, when I watch a movie, play a game or listen to music you can hear it basically because these speakers crank. I'm not happy though, it is a somewhat nasty crackle, it doesn't sound good. What should I do? Has anyopne experienced this?

Yeah, no song info or anything. Just the output, and the codec

I have had these speakers for around 6 months and just last night I noticed a rather large crackle from the right rear speaker, you can hear it standing right away from it and you can hear it with the volume turned down. However, when I watch a movie, play a game or listen to music you can hear it basically because these speakers crank. I'm not happy though, it is a somewhat nasty crackle, it doesn't sound good. What should I do? Has anyopne experienced this?

586682617[/snapback]

I've had these speakers for close to 12 months and I haven't experienced that. All I can suggest is to troubleshoot, unhook every wire and reassemble them in the correct order.

Satellites to subwoofer

control pod to subwoofer

signal cable to control pod

AC power from subwoofer to wall outlet

power switch on

control pod switch on

use the test feature on the remote control.

if the rear right speaker is still crackling swap it with the left rear speaker and see which one crackles now. if the right rear channel is still crackly then its either a problem with the source or with the amplifier on the subwoofer. if the crackling now comes from the left rear then its the satellite itself. either of these problems needs to be escalated to logitech support.

hope that helps.

  • 3 weeks later...

can someone who also owns these speakers help me test something?

I guess I'm looking for someone who uses these speakers as a home theatre set up and has them hooked up via digital coax cable to a digital cable/satelite box. although someone using the speakers as a computer set via digital coax might be able to help too.

this is the issue, i have my digital cable box feed digital audio to my sound touch control centre, and lets say I want to use the Mute feature. I mute the speakers themself and then lets say I change the channel. When I change the channel the digital box stops sending an audio signal to the speaker for a split second (this is normal), but once the digital cable box starts sending the audio of the new channel the speakers are not muted properly anymore. and satellite speakers remain completely silent but the subwoofer plays away at normal volume (depending on what the speakers were set to previously).

so lets say im blasting my speakers, and i mute it, then change the channel while keeping the speakers muted, once the new channel appears my subwoofer starts playing the bass from that channel, its quite the experience since you can see just how much of the sound experience comes from the subwoofer without the satellites but im wondering if its normal.

any help is appreciated, thanks.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, It would appear so, according to https://finance.yahoo.com/news/how-to-hide-your-home-on-google-maps-apple-maps-204146687.html. Regards, Aryeh Goretsky      
    • Hello, The Nvidia Founders Edition 3080 video card is approximately six years old, correct? Have you looked into whether replacement fans are available for it? Perhaps replacing those will improve cooling, especially when combined with cleaning the card's heatsink and replacing the thermal interface materials. Regards, Aryeh Goretsky  
    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!