Recommended Posts

Please help me with this problem

I am running a WinXP sp2 home installation. I dont have any kind of LAN in my PC. I have applied the patch to increase the tcpip connections. This particular problem started yesterday.

I am a cable internet user. Yesterday when I was using Azureus to download a torrent (@ 100+ KB/s speed), the download suddenly stopped. When I checked the connection, I found that none of the internet applications are working (including browsers, chat pgms). Basically net was killed somehow. I restarted the modem and it started working again. But again when I start Azureus, it downloads for about 1 to 2 mins and kills the connection. I believe this happens once the seeder+leecher no. becomes very high.

I tried changing the bittorrent client, but no use. I checked the eventlog. There was one error from 'IPNATHLP' (event: 32003). I havent installed NAT or windows firewall. And I disabled the Windows service which starts them.

Still the problem continues but now the 'IPNATHLP' error doesnt come. If I try any other protocol for downloading, this doesnt happen. But with bittorrent, it occurs.

I dont know what to do. I hope the Internet Gurus here can help me in this matter.

welcome to neowin.

you see, p2p is only half-legal so i hate giving you support for it. so..you know p2p includes uploading aswell..not only downloading..that might kill your line. i know aol doesn't like up- and downloading at the same time.

Do you use a router or something similar? I've had a similar problem before where the amount of connections that azureus is doing is filling up the connections table on my router, consequently when I try to use any other internet-using program it fails.

My solution - change the maximum amount of connections used for azureus (found in configuration). I have it set to 300 and seems to be fine for me atm.

Hope this helps :)

welcome to neowin.

you see, p2p is only half-legal so i hate giving you support for it. so..you know p2p includes uploading aswell..not only downloading..that might kill your line. i know aol doesn't like up- and downloading at the same time.

584772936[/snapback]

No I dont have any router. I shall try your tip about Azureus and get you back. But the problem persisted even when I changed the client. Therefore there must be a generic solution.

My solution - change the maximum amount of connections used for azureus (found in configuration). I have it set to 300 and seems to be fine for me atm.

Hope this helps :)

584772964[/snapback]

No man. It is not working.

Are u using Internet Connection Sharing?

584773163[/snapback]

No, I am not using ICS.

don't worry, your problem happens with a lot of people as I have found out over the past. I think it has a lot to do with your cable modem and how it works. I have the same problem with or without a router. I know it is very annoying because you cannot download anything consistently over bit torrent without having to constantly monitor your connection. Anyway, good luck finding a solution. BTW, is it a Linksys modem? That is the one I have seen do it the most. The motorola surfboards seem pretty good from what I hear. Maybe try one of those. If you find an answer, be sure and let me know.

Search a patch whose name is EvID4226Patch.exe from google. It might be helpful!

584773232[/snapback]

I think the patch you are talking about is the one which modifies tcpip.sys to increase the no.of connections. If so, well, I already applied it.

don't worry, your problem happens with a lot of people as I have found out over the past.  I think it has a lot to do with your cable modem and how it works.  I have the same problem with or without a router.  I know it is very annoying because you cannot download anything consistently over bit torrent without having to constantly monitor your connection.  Anyway, good luck finding a solution.  BTW, is it a Linksys modem?  That is the one I have seen do it the most.  The motorola surfboards seem pretty good from what I hear.  Maybe try one of those.  If you find an answer, be sure and let me know.

584773233[/snapback]

I am using a Motorola surfboard SB4200 modem.

I think the patch you are talking about is the one which modifies tcpip.sys to increase the no.of connections. If so, well, I already applied it.

I am using a Motorola surfboard SB4200 modem.

584773484[/snapback]

What firmware does your SB4200 have. If it's any version earlier then 4.4.2 it needs to be updated or else your crashing problem will continue when using any app that requires a sudden large amount of incoming/outgoing connections to be made.

ima take a wild guess at it trying to upload faster than what your connection can do, normally ends up killing the connection... well it does here, try a client which you can control the upload speed and set it below your top upload speed, to be honest not used bittorrent proggys in an age, but used to happen alot

Checky

a lot of ISPs will cut your connection or cap your speeds if they notice you are "Acting as a server". usually and ISP will require you to pay more if you want to have a "server" on your network. just get on bt, then get off... unfortunately you are not able to share, and thats the end of it.

i had this problem, it was caused by mcafee firewall. I tried norton, had the same problem. I'm now using the sp2 firewall and no longer have the problem.

Sometimes, if my pc has been on for a few days and downloading, my internet apps such as MSN messenger are frequently disconnected from the internet while the p2p app is running, rebooting the pc clears this problem.

I read somewhere at the time that mcaffe/norton dont like p2p apps. I concur with this.

I notice you aren't using a firewall at all, so it's not likely to be anything i've suggested re: software. I did however notice that there was a patch my belkin hardware router that caused it to disconnect when there were too many connections. Maybe something like this is happening to your modem?

the bottom line is that bittorrent is a resource hog, in theory it could be causing problems somewhere on you ISP's network and causing a dodgy router to fail... there's bugger all you can do about this really, why not use usenet instead, it's much faster and more reliable (IMHO)

;)

If the file isn't 100% seeded, you might be hitting the maximum amount you can get. BT "spreads" the bandwith, so don't be concerned if all you are doing is uploading for a period of time. Its meant to make sure everyone gets the file slowly so people can't jump off when they finish.

If the file isn't 100% seeded, you might be hitting the maximum amount you can get. BT "spreads" the bandwith, so don't be concerned if all you are doing is uploading for a period of time. Its meant to make sure everyone gets the file slowly so people can't jump off when they finish.

584775679[/snapback]

This file has about 500+ seeders and 300+ leechers.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!