Recommended Posts

Please help me with this problem

I am running a WinXP sp2 home installation. I dont have any kind of LAN in my PC. I have applied the patch to increase the tcpip connections. This particular problem started yesterday.

I am a cable internet user. Yesterday when I was using Azureus to download a torrent (@ 100+ KB/s speed), the download suddenly stopped. When I checked the connection, I found that none of the internet applications are working (including browsers, chat pgms). Basically net was killed somehow. I restarted the modem and it started working again. But again when I start Azureus, it downloads for about 1 to 2 mins and kills the connection. I believe this happens once the seeder+leecher no. becomes very high.

I tried changing the bittorrent client, but no use. I checked the eventlog. There was one error from 'IPNATHLP' (event: 32003). I havent installed NAT or windows firewall. And I disabled the Windows service which starts them.

Still the problem continues but now the 'IPNATHLP' error doesnt come. If I try any other protocol for downloading, this doesnt happen. But with bittorrent, it occurs.

I dont know what to do. I hope the Internet Gurus here can help me in this matter.

welcome to neowin.

you see, p2p is only half-legal so i hate giving you support for it. so..you know p2p includes uploading aswell..not only downloading..that might kill your line. i know aol doesn't like up- and downloading at the same time.

Do you use a router or something similar? I've had a similar problem before where the amount of connections that azureus is doing is filling up the connections table on my router, consequently when I try to use any other internet-using program it fails.

My solution - change the maximum amount of connections used for azureus (found in configuration). I have it set to 300 and seems to be fine for me atm.

Hope this helps :)

welcome to neowin.

you see, p2p is only half-legal so i hate giving you support for it. so..you know p2p includes uploading aswell..not only downloading..that might kill your line. i know aol doesn't like up- and downloading at the same time.

584772936[/snapback]

No I dont have any router. I shall try your tip about Azureus and get you back. But the problem persisted even when I changed the client. Therefore there must be a generic solution.

My solution - change the maximum amount of connections used for azureus (found in configuration). I have it set to 300 and seems to be fine for me atm.

Hope this helps :)

584772964[/snapback]

No man. It is not working.

Are u using Internet Connection Sharing?

584773163[/snapback]

No, I am not using ICS.

don't worry, your problem happens with a lot of people as I have found out over the past. I think it has a lot to do with your cable modem and how it works. I have the same problem with or without a router. I know it is very annoying because you cannot download anything consistently over bit torrent without having to constantly monitor your connection. Anyway, good luck finding a solution. BTW, is it a Linksys modem? That is the one I have seen do it the most. The motorola surfboards seem pretty good from what I hear. Maybe try one of those. If you find an answer, be sure and let me know.

Search a patch whose name is EvID4226Patch.exe from google. It might be helpful!

584773232[/snapback]

I think the patch you are talking about is the one which modifies tcpip.sys to increase the no.of connections. If so, well, I already applied it.

don't worry, your problem happens with a lot of people as I have found out over the past.  I think it has a lot to do with your cable modem and how it works.  I have the same problem with or without a router.  I know it is very annoying because you cannot download anything consistently over bit torrent without having to constantly monitor your connection.  Anyway, good luck finding a solution.  BTW, is it a Linksys modem?  That is the one I have seen do it the most.  The motorola surfboards seem pretty good from what I hear.  Maybe try one of those.  If you find an answer, be sure and let me know.

584773233[/snapback]

I am using a Motorola surfboard SB4200 modem.

I think the patch you are talking about is the one which modifies tcpip.sys to increase the no.of connections. If so, well, I already applied it.

I am using a Motorola surfboard SB4200 modem.

584773484[/snapback]

What firmware does your SB4200 have. If it's any version earlier then 4.4.2 it needs to be updated or else your crashing problem will continue when using any app that requires a sudden large amount of incoming/outgoing connections to be made.

ima take a wild guess at it trying to upload faster than what your connection can do, normally ends up killing the connection... well it does here, try a client which you can control the upload speed and set it below your top upload speed, to be honest not used bittorrent proggys in an age, but used to happen alot

Checky

a lot of ISPs will cut your connection or cap your speeds if they notice you are "Acting as a server". usually and ISP will require you to pay more if you want to have a "server" on your network. just get on bt, then get off... unfortunately you are not able to share, and thats the end of it.

i had this problem, it was caused by mcafee firewall. I tried norton, had the same problem. I'm now using the sp2 firewall and no longer have the problem.

Sometimes, if my pc has been on for a few days and downloading, my internet apps such as MSN messenger are frequently disconnected from the internet while the p2p app is running, rebooting the pc clears this problem.

I read somewhere at the time that mcaffe/norton dont like p2p apps. I concur with this.

I notice you aren't using a firewall at all, so it's not likely to be anything i've suggested re: software. I did however notice that there was a patch my belkin hardware router that caused it to disconnect when there were too many connections. Maybe something like this is happening to your modem?

the bottom line is that bittorrent is a resource hog, in theory it could be causing problems somewhere on you ISP's network and causing a dodgy router to fail... there's bugger all you can do about this really, why not use usenet instead, it's much faster and more reliable (IMHO)

;)

If the file isn't 100% seeded, you might be hitting the maximum amount you can get. BT "spreads" the bandwith, so don't be concerned if all you are doing is uploading for a period of time. Its meant to make sure everyone gets the file slowly so people can't jump off when they finish.

If the file isn't 100% seeded, you might be hitting the maximum amount you can get. BT "spreads" the bandwith, so don't be concerned if all you are doing is uploading for a period of time. Its meant to make sure everyone gets the file slowly so people can't jump off when they finish.

584775679[/snapback]

This file has about 500+ seeders and 300+ leechers.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Windows 10 IoT LTSC is supported until 2032, Windows 11 LTSC until 2029. So oddly enough the Windows 10 version is supported longer.
    • Latest Rufus update improves new Windows 11 install method by Taras Buria Pete Batard, the maker of Rufus, a very popular app for creating bootable Windows (and other OS) media, has released a new beta version of its app. Rufus 4.15 beta is now out, and while it offers no new features, there are all sorts of improvements and fixes, including for the new Windows 11 installation method that was introduced in version 4.14 in early May. The "Silent Windows 11 installation" is a new feature whose goal is to automate operating system installation. All you have to do is boot from the drive, and then Rufus takes over, doing all things for you, such as setting up a new account, skipping ads and prompts, and more. It is a very handy tool, but initially, it had some bugs and issues that required addressing. With version 4.15 beta, Rufus is fixing that, particularly a bug with installation failing at 75%, crashes on Snapdragon X-based PCs, and more. Here is the changelog: Rufus 4.15 beta is now available for download from its GitHub repository. If you have never used Rufus before, you can check out our guide here. It is a very useful utility to have, as it allows you to deal with plenty of Windows 11's annoyances, which are still there, despite Microsoft's ongoing efforts to fix them.
    • Microsoft fixes one of Excel Copilot's most frustrating limitations by Usama Jawad Microsoft began integrating Copilot into Excel a couple of years ago and has been upgrading it with new functionalities since then. While some changes have been controversial, Microsoft is hoping to win over users by allowing them to be more productive via Copilot. To that end, it has now announced a Copilot improvement that may actually be appreciated by people who use it regularly. Excel customers often use the Copilot prompt box to issue instructions to format and customize their data, but it can become quite tiring to keep repeating the same instructions again and again. Microsoft now allows you to define Copilot personalization rules for formatting, naming conventions, formulas, and report styles. These can be accessed via Settings > Personalization, where you can explain your rules in natural language like "Always format currency in USD with no decimals", and just let Copilot take care of the rest. Microsoft is going a step further in this direction by allowing you to set workbook rules too. These rules are stored as a .Rules sheet, and are preserved while the workbook is shared. This fosters collaboration while making sure that standard rules govern the Copilot editing experience across the organization. Other advantages of this capability include pointing it to specific examples, defining dynamic formulas, and referencing an entire sheet and asking Copilot to infer rules based on that. You can leverage this feature by opening Copilot in Excel, clicking on "+", and selecting Create workbook rules. If you have an existing .Rules sheet, you can simply start listing the rules in column A as well. Personalization features are available to all Copilot in Excel users across the web, Mac, and Windows. Meanwhile, workbook rules are currently being previewed for Windows and Mac customers on the Insiders channel. General availability is scheduled after a few weeks, but a concrete date is currently unknown. Overall, the Excel capability is quite similar to ChatGPT's memory features, which allow you to permanently store items in the AI model's context window.
    • Imagine you still haven't discovered Total Commander that is doing all those things for three decades already...
    • This sounds like underneath the nice marketing spin, either someone at Adobe got tired of their lazy devs and asked Microsoft to help them sort at least some of Adobe's ancestral spaghetti code to make it go faster, or Microsoft wanted Adobe's crap to run better on Windows to make it look better when compared to Apple, so they offered to intervene. Either way, GOOD.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      515
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      78
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!