Recommended Posts

Hmm, Nestor, I don't know if it was me you replied to.

I did not patch my modem, I just upped the allowed number of connection in windows with the patch for the 4226 issue. I have a adsl router btw, seems like most people are on cable modems in america, but not here in Norway. As mentioned, the problem is definitly not my router, since the problem freezes my whole lan-connection.

bufodill - yes I confused the issue with someone elses comments of their cable modem this was a reply to the original person who posted and a few others along the way.

Can you reset your router back to factory defaults?

Edited by Nestor

There is no reason to reset the router, when all the other computers on my local network works as normal. it is only the one computer that has this problem. I can even run bittorrent on the other computers and they won't experience the same problem. It is just this one computer that disconnects itself from the network until I kill bittorrent on it.

As mentioned, I run the patch to upp the limit of connections, and 12 hours later it seems to have helped. I hope I didn't jinx myself.

I have the same problem with 2 different modems (doesn't matter which one I use) The rca dcm245 and the linksys cable modem (no router built in)

The best explanation i have seen of these effect is that the bit storm or mass of connections cause the modem to lose connectivity to the cable company, lose sync I guess.

I am curious about the surfboard modem how hard is it to update the firmware as I don't think i can update the firmware on either of mine.

I have used sevral bit torrent clients (azureus is the worst when it comes to this issue) and they all cause this problem to one degree or another.

i am having what appears to be the same issues using Utorrent on Tiscali with the Sagem Modem. I can be downloading during the night but when checking in the morning although I appear to be connected there is no upload or download speed. When I try to search for a web page I receive the "Page is not available" screen. The only way I can get up and running is to reset my modem.

Any help??

Cheers

Bear in mind - the latest version of azeurues may not always solve your problem.

I encountered a similiar situation occuring with my computer a while ago - and fixed it by going back to the azeurues installer and doing a clean install. It worked fine until it updated via the auto-update utility and then stopped working again.

What it did - was somehow prevent all three network cards (wifi, laptop and dock) from communicating to anything - even pinging localhost. Forced to reboot the computer, and then it worked.

So I re-installed azeureus again - and stoped the auto update. However this problem only occured with the auto update, and not with the version direct from the website.

However you mentioned your problem also occured with other torrent clients as well.

Here is what you could do.

Run one torrent downloading only.

Restrict it to 2 concurrent uploads, and restrict that to 1kb for that torrent while downloading.

Restrict the global download to 5kb - on a 256/64 DSL line you shouldn't upload more than that or it will affect your performance.

Restrict the number of connection available for a single torrent to less than 100.

Let that run overnite and see how it goes.

Or you can upgrade the firmware to your modem, but you really need to install some firewall software if you are running a DSL Modem rather than a router - and leaving the PC on connected to torrents - who knows what is attempting to gain access to your computer while you are downloading. It could even be this causing the problem.

This may be a stupid question but here goes anyway :blush:

I am running Zonealarm with uTorrent. Do I have to allow uTorrent to accept connections from the internet? and run as a server? These are the two pop ups from Zonealarm. Up until now I have been saying yes to both of them but last night I denied the 'accept connections to the internet' and was still downloading, slowly, but downloading none the less.

Cheers

N

  • 3 weeks later...

Bittorrent also kills my internet connection. I'm using abc-client for a year now and never had problems. Suddenly internet became slow when downloading a few huge torrent files and a some hours later there was no connection at all. Restarted, but all pcs on the network suffer when I open abc now. When closing down the abc-client, the connection becomes active again right away and everything works fine.

Have tried different clients, no result.

I found out that, even when i reduce the number of connections and upload speed, there always are the same ip-addresses trying to connect for every different torrent I seed or download. These are 38.101.109.*, (with * between 39 and 89), they make up about 80% of the total connections (at the moment set to 60 max). I think they are the problem...anybody found the same?

Heres my experience.

I have the same problem but I live with it. Im with NTL 10meg service. Reason it shuts down is because of the modem (lil silver slim box). It cant support multiple upload/downloads which torrents use unlike html which is usually one. This scrambles the modem and locks it up. Need to unplug the modem. I dont know where your from or your isp but if you are UK and NTL ask for a new modem, as Im going to finally get round to doing. Only reason I dont is NTL take ages doing ANYTHING.

  • 5 months later...

This thread has branched off into so many directions, it's hard to know where to even begin.....

First off....when someone says they have to reboot their computer to fix the problem....even temporarily, STOP telling them they need to update....reconfigure....do a rain dance for their modem. If rebooting solves the issue, then the modem has little or nothing to do with the problem. I will say however that it's generally a good idea to keep all firmwares updated for your modem, router, print servers, etc...

For those of you who have to reboot to fix the problem, you may not have to. Try this, right-click on your my network places and select properties. This will pull up your network connections. Normally....when there's a problem with the network...be it modem...router...switch...a simple release/renew of the IP address should suffice. However when I have the problem indicated by the guy who originally started this thread, a release/renew or repair doesn't work. Here's what you can do though, there should be a connection there called local area connection, right click on it and select disable. Wait for it to show it's status as disabled then right click again and select enable. This is the only way I can fix the problem without having to reboot.

As for keeping it fixed, I'm at a loss. I've been dealing with this problem for months now. It doesn't happen every night, regardless of the upload or download caps, regardless of the multitude of options I've played with in that past few months. Although I will mention that it does indeed happen more often when either the download or upload speeds near their maximum capacity or if several torrents are active at once. Keeping it simple stupid, one donwloading, one seeding....capping the upload speed...etc...will usually keep it stable overnight, but it's no gaurantee.

This problem didn't start happening until I was looking at ways to tweak azureus to get better download speeds. I was maxing out at 35KB/s with a 9meg/1meg service from COX Cable with the default settings azureus comes with. This didn't seem right to me. The first thing the guide said was to use that 4226 patch to change the half open connections from 10 to 50(or whatever you decide). I'll make mention here that I had never experienced the problem before I did this. The rest were just changes in the azureus client itself.

I'm not saying the 4226 patch itself is to blame, but something was changed during that process, because even when I reset the connections to 10 and used all default settings in azureus, the problem remained.

I've seen this problem pop up in several forums over the net and no one seems to have a difinitive answer, my purpose here is to keep the paper trail going, so to speak. I've been a desktop/network administrator for nearly 10 years, so I'm no noob here. If I can help anyone, I will try.

  • 2 months later...

Please help me with this problem

I am running a WinXP sp2 home installation. I dont have any kind of LAN in my PC. I have applied the patch to increase the tcpip connections. This particular problem started yesterday.

I am a cable internet user. Yesterday when I was using Azureus to download a torrent (@ 100+ KB/s speed), the download suddenly stopped. When I checked the connection, I found that none of the internet applications are working (including browsers, chat pgms). Basically net was killed somehow. I restarted the modem and it started working again. But again when I start Azureus, it downloads for about 1 to 2 mins and kills the connection. I believe this happens once the seeder+leecher no. becomes very high.

I tried changing the bittorrent client, but no use. I checked the eventlog. There was one error from 'IPNATHLP' (event: 32003). I havent installed NAT or windows firewall. And I disabled the Windows service which starts them.

Still the problem continues but now the 'IPNATHLP' error doesnt come. If I try any other protocol for downloading, this doesnt happen. But with bittorrent, it occurs.

I dont know what to do. I hope the Internet Gurus here can help me in this matter.

i have had the same problem

log into your cable modem and check you have the correct downstream frequency..

mine was 31250000 hz when it should of been 31000000 hz

i set the starting frequency back to 31000000 and resarted the modem

this solved my problem hope it helps

  • 1 month later...

I am having the same problems as others posting here, but I wanted to add my experiences because I think it will help from going down the wrong path.

First off, I just want to say that Bit Torrents are legal, just don't download copyrighted material when using it. I download Open Source software (Like big Linux Distro ISO's) all the time.....or at least until I started having these problems. :no:

Anyway, what I have found is this......

It doesn't matter if I use Azureus or uTorrent, (on my desktop) they both do the same thing. If I leave a torrent running overnight, it not only kills my Internet connection (all computers in my house can't access the Internet), but it also kills the network connection on my LAN (my workstation can't access my local server). I know this was mentioned before, but please bare with me. If I simply kill my Torrent app, my Internet connnection does not come back, but my LAN connection does. I must reboot my DSL modem for my Internet connection to come back.

On the other hand, if I only leave my Torrent app open for a little while (a couple of hours or so) it will run fine for a little bit and then I will loose LAN connectivity, but not Internet for the whole house. At that point, all I have to do is close the Torrent app for my LAN connection to come back.

Okay, here's the real kicker. I can run a Torrent client (either Azureus or uTorrent) from my Laptop (running the same OS levels as my desktop) just fine without any problems at all. I leave it running for days in a row without problem. I can also reboot my desktop into Linux (running OpenSUSE), running Azureus and I can download Torrents with no problems at all.

All this being said, I can't see how it is anything but a local workstation issue. Possibly a setting in Windows, my Torrent apps or maybe another app that I have installed on my desktop. I haven't done a packet trace on my workstation when it is having a probelem, but it must be sending out a packet (or many packets) that end up killing my modem.

Sorry for the long explaination and I know I repeated a lot things already mentioned here, but hopefully this ties things together a little more. I don't think it is a problem with the modem, router or anything like that. I will do the packet trace and follow up with my results.

Do you get any error in the Event Log?

If I let it go too long and it kills my Internet connection, I get "TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts." If I go just long enough to kill my workstations LAN connection, I get nothing in the Event Viewer.

Well, I feel like an idiot. I applied this patch (Event ID 4226 Patch) and it seems to have fixed my problem. I didn't apply it before posting because some people were saying that it didn't fix the problem. After reading the article mentioned, it makes sense to me. If you are still having this problem, apply the patch and make sure that your tcpip.sys file gets updated and that Windows doesn't roll it back (it will try). After that, reboot and you should be fine.

Edited by bassmonkey

I have had this problem for awhile too; everytime i leave azureus on for too long, the LAN connection to the router for this machine dies without affecting other computers on the network. I tried to disable the Local Area Connection and re-enable it but the computer just freezes up. This to me seemed like a network card problem so I check the driver version and it was from year 2003!! Therefore, i went to my motherboard supplier website and downloaded a new driver and everything seems fine for the time been.

Just out of curiosity, does any body whos having the same problem has the Realtek RTL8169/8110 Faimly Gigabit Ethernet NIC on their Gigabyte motherboard? If so, i believe an old driver could be the problem. You just need to go to http://www.gigabyte.com.tw/Support/Motherb...enter_List.aspx and update it. Hopefuly it solves the problem.

  • 1 year later...

I have the same problem. It occured suddenly without changing anything with my system. But my provider changed bandwith (it's 25 mbs now) and so I think it really has something to do with plus of connections I have.

I searched the web for answers and found a guy on a German router forum who seemed to be knowing what he was talking about. He said it's a problem with something called "DHT" (don't ask me what exactly it is). Bittorrent usually produces more and more of them without deleting the old ones and the router always prefers the old ones, so from one point it kills your connection. However you can switch off this DHT (2 ticks in mutorrent) thing in your client. I did it today and so far everything works fine.

I really hope this is the solution! Good luck guys P2P forever

  • 1 year later...

Hi there,

okay i can see this is an old thread but ill try

I have the same problem, ive been using utorrent and limewire, ( not the same time) for a long time now if i start the programe my internet goes down, and no computers can log on the net, then i restart my router and it works fine, if the torrent programe is closed, if i start it agin i can download 2 minutes at the connection goes down agin,

I have tried it on orther pc, and there it works fine, but no matther where i take my pc, it will kill the line if im opening utoorent or another tracker,

I hav tried to update and reinstall, the tracker with no luck,

Im using mac OS

Im shure the problem is one the mac, because when orther pc goes online it works fine with an tracker, but not on my computer,,,

pleace help me, Jonathan from Denmark sorry for the bad spellign :)

I didnt read the rest of the thread (it was all bit old anyway) but from my experience with p2p apps - if they opens hundreds of connections at one time to the other peers on the same network then it can 'choke' your router / modem and prevent any other app (like a web browser) from accessing the internet. Have a look if the p2p app has an option to limit the number of connections it maintains at any given moment.

Of course, I could be wrong :D I rarely use p2p networks, most of my experience with them are my darn flatmates..

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      81
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!