Recommended Posts

Point of Interest: The instance "The Deadmines" is abbreviated "VC" after the name of the last boss: Edwin VanCleef. Dire Maul is abreviated "DM" even though it was added to the game long after Deadmines.

DM itself is a single instance (three main areas with five entrance portals connected by a pair of tunnels) but most people only run one "wing" at a time. The wings are North, East, and West so typically people would call out the specifics: LFM DM West, or Rogue, LFG DM North Tribute* run, have matts.

* A tribute run was a special kind way of running DM North that resulted in fewer but better quality pieces dropping.

It's confusing to keep tabs on who's running what. I couldn't figure out why people were farming DM when they could be in outland getting much better gear from much more interesting instances.

Point of Interest: The instance "The Deadmines" is abbreviated "VC" after the name of the last boss: Edwin VanCleef. Dire Maul is abreviated "DM" even though it was added to the game long after Deadmines.

DM itself is a single instance (three main areas with five entrance portals connected by a pair of tunnels) but most people only run one "wing" at a time. The wings are North, East, and West so typically people would call out the specifics: LFM DM West, or Rogue, LFG DM North Tribute* run, have matts.

* A tribute run was a special kind way of running DM North that resulted in fewer but better quality pieces dropping.

It's confusing to keep tabs on who's running what. I couldn't figure out why people were farming DM when they could be in outland getting much better gear from much more interesting instances.

Ahhh.

I say DM to mean Deamines heh.

yeah the only reason you would want to farm something in an instance now, is to make a twink.. If you are just leveling gear will get replaced so fast that its pointless and ALOT of time lost that could be spend on leveling to get to Outlands.

For those of you not 60+ yet, let me give you an example. My guild had BWL (BlackWing Lair) which was the highest Tier level loot in the game before Burning Crusade, and we replaced 80% of those items by level 64 in outlands with green gear. So don't waste alot of time getting gear, it will come, either focus on leveling as fast and as efficient as possible or take your time and just enjoy the game.

For those of you not 60+ yet, let me give you an example. My guild had BWL (BlackWing Lair) which was the highest Tier level loot in the game before Burning Crusade, and we replaced 80% of those items by level 64 in outlands with green gear.

Top end Raid loot (The AQ40/Naxx stuff + some loot from BWL) holds up really well until you start getting level 70 gear. The real problem is unless you're getting run-through the old raids by level 70 people with nothing better to do, there's pretty much no way anybody leveling will see that gear.

I wore 3 pieces of Tier 2 and rings from late AQ/Early Naxx until I'd cleared Karazhan and Started into SSC/TK: Ring of the Martyr and Band of answered prayers and they were pretty much best-in-slot at the time. Stat-wise they hold up pretty well to the blues people doing heroic 5-man content can get: Ring of fabled hope and Ancestral Band.

welll...I just started playing again. Just checked my account, first time I have played since 10/2006.

Im transferring my 60 warrior over to Lothan server. So if you are on this server let me know. I feel like Im playing it for the first time again and honestly can hardly remember the general combos..whats good here/there etc.

and just started a draneia shaman there too. So any tips for a shaman would be nice, cause right now he seems confusing with the stupid totems (only level 8)

Quick question as this is the first time I have played on my new monitor. Is there a way to increase the font size? I have to lean in/squint/strain my eyes to read quest info and chat stuff as well. Any suggestions for this?

edit: Also is there a way to change the health bars of my enemies to numbers instead of %. I see numbers for their mana but not their health. I unchecked that box in advanced options "display %" yet its still there.

ooo one more thing, where did the AA/AF slider go? I know it used to be there. Im guessing I can turn that one up all the way and make the game look prettier :)

From my experience, horde usually calls DM as VC, whereas alliance tends to just abbreviate it as DM. But thats just how it is on the servers I play on...

Anyway, my current UI

th_myuiCQmh.jpg

UI looks nice. I see you are using what looks like Quartz, Pitbull and Bartender, but which minimap mod is that? I love the gloss finish on it. Also if you are using bartender which skin do you have selected? Are you using cycircled with it and if so what skin?

Thanks man

Actually, I'm not using any of those mods. :p Tho I have used them in the past.

The mods I'm using now are part of a package. You can get it HERE.

If you're only going for the minimap mod, then just look for the rMinimap folder in that .rar file. However, I suggest you try out the whole pack and see if you like the unitframes, buff bars, cast bar, etc.

I want to run Ulda tonight. Is there good gear for a Mage in there?

http://www.wowdb.com/location.aspx?id=1337#1:0:0

Just go there and click the NPC tab, then click on each boss' name, and you can see what they drop.

A new player in need of suggestions. Please write.

I just started playing as a Troll Hunter and I am having a bit of .... problems.... figuring out what type of hunter should I play. I want to follow the survival and marksmanship trees, but do I really need the beast master? Can I go without that?

And, for Undead, which class should I choose. I am thinking mage or rogue. Any suggestions?

I dont know alot about hunters but in reference tot he undead choice, you should play whatever is going to make you happiest, there is no right or wrong choice pick according to how you like to play.

One more thing, i would concentrate on levelling one character at a time, not 2 once one is levelled up to 70 or 80 if it takes you that long then you should make your "alt"

A new player in need of suggestions. Please write.

I just started playing as a Troll Hunter and I am having a bit of .... problems.... figuring out what type of hunter should I play. I want to follow the survival and marksmanship trees, but do I really need the beast master? Can I go without that?

And, for Undead, which class should I choose. I am thinking mage or rogue. Any suggestions?

BM tree for the hunter is just the quickest leveling tree.

You could level on Mark/Survival, but it will just be lower.

In WoW, while leveling, the quickest tree is usually what most people want ;) You can respec at 70 (Y)

To be more specific, go for THIS talent build while leveling.

Once you're 70, you dont need the survivability and pet armor talents, so you should respec to THIS, which is the best damage dealing talent build for a hunter.

About the classes for an Undead... You should definitely try out a warlock, they're easy to lvl since they have a pet just like hunters. Rogues are also a fun class...

I think some rules should be set up for creating alts, like one level 55+ per level 70 you have.

Blizzard has said that they don't want heaps of level 1 Deathknights running around - lorewise it wouldn't fit so last we heard Deathknights were going to start around level 55 give or take. Of course this was 6 months ago so things might've changed internally since then.

A new player in need of suggestions. Please write.

I just started playing as a Troll Hunter and I am having a bit of .... problems.... figuring out what type of hunter should I play. I want to follow the survival and marksmanship trees, but do I really need the beast master? Can I go without that?

And, for Undead, which class should I choose. I am thinking mage or rogue. Any suggestions?

For hunters I believe Beast Mastery is the best spec for levelling. As for undead, you should really try both classes as they play significantly differently and you might find you like one style more than the other.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • A 13 billion year old secret about our Universe's origin was revealed by Sayan Sen Image by Pascal Küffer via Pexels Researchers at the Max-Planck-Institut für Kernphysik (MPIK) in Heidelberg had recreated a key chemical reaction from the early universe, producing results that could change scientists' understanding of how the first stars formed. The study focused on the helium hydride ion (HeH⁺), which is widely regarded as the first molecule to form in the universe. Scientists believe HeH⁺ appeared around 380,000 years after the Big Bang, when the universe had cooled enough for electrons and atomic nuclei to combine into neutral atoms in a period known as recombination. This marked the beginning of chemistry in the cosmos. Immediately after the Big Bang about 13.8 billion years ago, the universe was extremely hot and dense. As it expanded and cooled, hydrogen and helium became the dominant elements. Once neutral helium atoms formed, they could react with ionised hydrogen nuclei, or protons, to create helium hydride ions. Although simple in structure, HeH⁺ played an important role in the young universe. It was the first step in a chain of reactions that eventually produced molecular hydrogen (H₂), a molecule made up of two hydrogen atoms and now the most abundant molecule in the universe. Molecular hydrogen later became a key ingredient in the formation of the first stars. At the time, the universe had entered a phase often called the cosmological "dark age." Matter had become transparent to light following recombination, but there were still no stars or galaxies producing visible light. Several hundred million years would pass before the first stars appeared. For those first stars to form, large clouds of gas had to collapse under their own gravity. To do that, the gas needed to cool by releasing energy. While hydrogen atoms can help with this process at high temperatures, they become less effective below about 10,000 degrees Celsius. Molecules can continue the cooling process by releasing energy through rotational and vibrational motions. Scientists have long considered HeH⁺ a potentially important coolant because of its comparatively large dipole moment, a property that describes how electric charge is distributed within a molecule and allows it to release energy efficiently. The amount of helium hydride present in the early universe may therefore have influenced how easily the first stars could form. At the same time, HeH⁺ was constantly being destroyed. Under primordial conditions, its main destruction mechanisms were recombination with free electrons and chemical reactions with hydrogen atoms. These reactions ultimately helped produce molecular hydrogen, linking the formation and destruction of HeH⁺ to the chemistry that shaped the early universe. For many years, theoretical studies suggested that reactions between HeH⁺ and hydrogen atoms would become much slower at low temperatures. Scientists believed there was an energy barrier along the reaction pathway that reduced the chances of the reaction taking place in the cold conditions of the early universe. The new study suggests otherwise. To investigate the process, researchers recreated a closely related reaction using deuterium, a naturally occurring isotope of hydrogen that contains one proton and one neutron in its nucleus. When HeH⁺ collides with deuterium, it forms an HD⁺ ion and a neutral helium atom. This allows scientists to study the reaction in a controlled way while closely mimicking the behaviour of the original reaction involving hydrogen. The experiments were carried out at the Cryogenic Storage Ring (CSR) at MPIK, a specialised facility designed to recreate conditions similar to those found in space. Researchers stored HeH⁺ ions in the 35-metre storage ring for up to 60 seconds at temperatures just a few kelvins above absolute zero and merged them with a beam of neutral deuterium atoms. By adjusting the speeds of the two particle beams, the team measured how the reaction rate changed with collision energy, which is directly related to temperature. The researchers found that the reaction rate remains almost constant as temperatures decrease. In other words, the reaction does not slow down at low temperatures as earlier models predicted. “Previous theories predicted a significant decrease in the reaction probability at low temperatures, but we were unable to verify this in either the experiment or new theoretical calculations by our colleagues,” explained Dr Holger Kreckel of MPIK. “The reactions of HeH⁺ with neutral hydrogen and deuterium therefore appear to have been far more important for chemistry in the early universe than previously assumed,” he continued. According to the researchers, the reaction appears to be barrierless, meaning there is no energy obstacle preventing it from taking place efficiently even at very low temperatures. The findings support recent theoretical work led by physicist Yohann Scribano, whose group identified an error in a widely used potential energy surface, a mathematical model used to describe how the energy of a system changes during a chemical reaction. The error appears to have caused previous studies to significantly underestimate reaction rates under primordial conditions. The new calculations closely match the experimental results. Together, they suggest that helium chemistry in the early universe may need to be re-evaluated. Because molecules such as HeH⁺ and molecular hydrogen played an important role in cooling primordial gas clouds, the findings could help scientists build more accurate models of how the first stars formed. By showing that helium hydride was likely destroyed more efficiently than previously thought, the study offers new insight into the chemical processes that shaped the universe during its earliest stages and helped set the conditions for the emergence of the first stars. Source: Max-Planck Institute, EDP Sciences This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • "What an interesting smell you've discovered"
    • It could EASILY be 70 for the base game BUT + lots of FOMO to make it up to 100-120, like a few days Early Access, online money, pre-order bonus cars, weapons, missions, clothing, avatars or profile stuff, etc... And still WAY TOO MANY people would buy those and make Rockstar insane money.
    • Just to understand: your solution to getting rid of an online password manager is...another online password manager?
    • Cjam 2.5.0.0 by Razvan Serea Cjam is a lightweight and fast MP3 editor for Windows that lets you cut, join, and edit MP3 files without re-encoding. This means your audio quality remains untouched, and edits happen instantly. Cjam is ideal for quick, lossless edits—whether you're trimming music, combining tracks, or preparing audio for learning tools or podcasts. It features batch processing, scripting support, cue and playlist file handling, and a simple interface. Cjam is perfect for anyone who needs efficient MP3 editing without the complexity of full audio suites. Cjam requires a PC running Windows 10 or later and Microsoft .NET 6.0 or later. Key features for Cjam: No Re-encoding: Edit MP3 files without losing quality. Cut and Join MP3: Easily cut, trim, and combine MP3 tracks. Batch Processing: Edit multiple files at once for faster workflows. Scriptable Interface: Automate tasks with a custom command language. Cue and Playlist Support: Handle CUE and playlist files for seamless audio management. Fast and Lightweight: Quick processing with minimal system resources. Lossless Audio Editing: Ensure your edits don't affect audio quality. Simple User Interface: Clean, intuitive design for easy navigation. File Format Support: Works with MP3, Cjam-specific file formats (CJAMC, CJAMJ, CJAM). Cjam 2.5.0.0 changelog: Added clipboard-based import/export support for mp3DirectCut Added clipboard-based export support for REAPER Added support for naming IMP3 elements Changed the Reset behavior to preserve Undo/Redo history; use Shift key + Reset button to clear it Added a new command parameter (qcp) Added 8 new entries to lang.txt (main_c124-126, main_d150-151, main_m082, vme_c014, vme_d005) Fixed a bug where the il parameter was incorrectly applied when pasting VMP3s into the main list Fixed several other minor bugs Download: Cjam 2.5.0.0 | 1.4 MB (Freeware) Links: Cjam Home Page | Cjam Manual | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
    • First Post
      DrWankel earned a badge
      First Post
    • Reacting Well
      DrWankel earned a badge
      Reacting Well
    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      163
    3. 3
      PsYcHoKiLLa
      91
    4. 4
      Steven P.
      75
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!