Recommended Posts

when you should be happy with what we got, how many years did they ignore our pleas

Maybe it's me being stupid, but I don't get what you're trying to say.

I didn't play in Vanilla.

  • In classic druids were third rate at everything: all PVE rolls and all PVP rolls were better served by other classes. You saw them in raids as buff bots: they were there to toss innervate on priests and sponge the stormrage that dropped non-stop in BWL.
  • TBC made druids first-class tanks, the dominate PVP class, and passable melee DPS. While they had some healing utility they were marginalized by content. Sunwell heavily favored priests and shaman over druids as healers but you could still expect to find one or two tanking and maybe a tree for good luck (unlike say mages who raided sunwell from the front step by handing out buffs to the 'useful' classes).
  • In WoTLK a druid handily fills all four rolls in PVE and remains a strong PVP class too.

Blizzard hasn't been ignoring druids, they've spent their time making the class one of the most well

rounded in the game. if "these graphics aren't cool enough" can make it on to the list of complaints then the class is doing just fine.

That'd be great. I've seen those frames before just never knew what they were called.

You can get TukUI then in the forums there, is a section called skinning. There you can get addons allready skinned for the UI such as sexycooldown, recount and omen. Its pretty nifty :)

I also remember such an addon, or at least the functionality.. but don't remember the name.

What you can do is bind the Skull icon to a key and use it when you attack a mob.

You can also add it to a macro with a common attack that you're using.

Like Heroic Strike, or Swipe - I don't know if it will make the Skull icon go crazy, but it's a solution :p

I also remember such an addon, or at least the functionality.. but don't remember the name.

What you can do is bind the Skull icon to a key and use it when you attack a mob.

You can also add it to a macro with a common attack that you're using.

Like Heroic Strike, or Swipe - I don't know if it will make the Skull icon go crazy, but it's a solution :p

Nah, I don't want any more buttons in the UI nor do I want Macros as my openers differs, so that'd be quite annoying - Plus I'd have to dynamically be able to switch in combat, so everyone is

attacking the same target as me, would be annoying if I had to use a certain attack for it to switch.

So I'd find the addon I used, it was about 10 times easier :p

Thanks though (Y)

We're not looking for a DK at the moment but the standard fair "exceptional players always welcome" applies. We have two regular DKs and one trialing as DW frost whom I expect will be accepted. If you've got gear on par with Fainn you'd probably be able to find a spot as a backup but a full time spot probably isn't open right now (we're casual but consistent so relatively few open raider spots).

If you've moved on from "We're crappy healers, worthless DPS, free kills in PVP, and only useful on one fight as a tank (soaking hatefuls on patchwerk at 60)" to "we should look even more cool when we're smacking things" then I think you've made out just fine.

Almost on par with him. You can see Boredoom from Garona.

Regards

Nah, I don't want any more buttons in the UI nor do I want Macros as my openers differs, so that'd be quite annoying - Plus I'd have to dynamically be able to switch in combat, so everyone is

attacking the same target as me, would be annoying if I had to use a certain attack for it to switch.

So I'd find the addon I used, it was about 10 times easier :p

Thanks though (Y)

Can't you create a mouseover macro that sets the target just by (for example) CTRL-Shift-Click on the mob?

Something like "/run [mod:alt] SetRaidTarget("target", 8)"

There's also an addon called Simple Raid Target Icons that will let you double-click a mob and pick which icon you want from a popup "wheel" interface.

Can't you create a mouseover macro that sets the target just by (for example) CTRL-Shift-Click on the mob?

Something like "/run [mod:alt] SetRaidTarget("target", 8)"

There's also an addon called Simple Raid Target Icons that will let you double-click a mob and pick which icon you want from a popup "wheel" interface.

Which is useless in a fight with many mobs and you are switching main target in combat, can't go through wheels, menus and key-combos in that situation.

Oh well, just binded target markers on the F4, 5 and 6 keys - Will do for now, hopefully I'll find that addon I once used, it was really good.

Which is useless in a fight with many mobs and you are switching main target in combat, can't go through wheels, menus and key-combos in that situation.

Oh well, just binded target markers on the F4, 5 and 6 keys - Will do for now, hopefully I'll find that addon I once used, it was really good.

Or you could just say, "Hey guys, get smart and shoot the right thing." :p

So anyone (US peeps) got some good server names to drop? Going horde with a friend and we've been looking for a few days for a quality server and I'm wondering what some fellow neowian's have to say. PvE btw.

US - Area 52 - Horde; Horde dominated. I xferred here from a low pop. This is high pop awesomeness. I raid with guild. But my alt(s) run constant 12/12 25 man GDKP runs. As well as other content PuG / GDKP runs, tons of hard mode guilds etc.

US - Area 52 - Horde; Horde dominated. I xferred here from a low pop. This is high pop awesomeness. I raid with guild. But my alt(s) run constant 12/12 25 man GDKP runs. As well as other content PuG / GDKP runs, tons of hard mode guilds etc.

lawl.

That's where we ended up at, after talking to a few people from various servers.

That's usually asking too much for some people. :whistle:

Exactly, you need to babysit every party you're in :laugh:

Check this out, might not be what you were looking for, but seems to have the basics of what you need.

Also, this.

I accept gratitude via PayPal, thank you very much :p (J/K of course :))

Eeeeep! that sounds like the stuff I need, thank you very much sweetheart :wub:

I don't know if it's been posted already but this made my day :D

On a side note I had my first Crushbridge PuG today, wiped 2 times the first 15min, then disband. The best part is 1h later I was having my best PuG ever in the Nexus, the guys were just starting so we had to do Keristrasza several times before getting her, but everybody was patient which is a rare quality in todays PuGs. I've also dinged 72 on my main and first char ever, and I'm only 800g short to get Artisan Riding. Great day :)

Oh, and some questions : I'm now Skinning / Herba. I'm almost max-lvl skinning, is it a good profession gold-wise ? or should I change to something else ? I'd like some suggestions on the best professions gold-wise and usefulness-wise for a Night Elf Druid :) Should I just drop skinning ang get Mining / Herba for max gold ?

Here's a weird one. I'm asking for add on advice.

Anyone know any great Shaman add ons?

To do what?

With the default keybinds for each set of totems and Totemic recall, I really didn't think there was any need for shaman addon's (Unless you want something other than totems).

I don't know if it's been posted already but this made my day :D

On a side note I had my first Crushbridge PuG today, wiped 2 times the first 15min, then disband. The best part is 1h later I was having my best PuG ever in the Nexus, the guys were just starting so we had to do Keristrasza several times before getting her, but everybody was patient which is a rare quality in todays PuGs. I've also dinged 72 on my main and first char ever, and I'm only 800g short to get Artisan Riding. Great day :)

Oh, and some questions : I'm now Skinning / Herba. I'm almost max-lvl skinning, is it a good profession gold-wise ? or should I change to something else ? I'd like some suggestions on the best professions gold-wise and usefulness-wise for a Night Elf Druid :) Should I just drop skinning ang get Mining / Herba for max gold ?

This. Is. Epic. Haha, nice video ;)

If you're after gold, JC is the best profession to have, but you'll need to work for it, it's not easy.

Gathering professions could be beneficial as well, you just need to learn your realm's economics, I never bother to, but I still manage to make a nice profit from low-level leathers and other materials, Herbs sell for VERY nice prices, almost on any realm.

If you're going to be raiding, I'd recommend a profession that boosts your DPS (if you're DPS) or that provides the most "utility", like Alchemy and JC.

Don't bother dropping Skinning for Mining, only drop professions for a Main one, not for another support profession.

To Minifig, you need to be a tad bit more specific than that :)

Not to insult you, but if you're Elemental, then you barely need a UI, let alone addons :p

If you're a healer, get Clique.

If you're the one that dies on every pull... I mean, Enchantment, eh - I don't think there are any Shaman specific addons other than Totem management.

There are obviously some very nice addons, but they're not exclusive to Shamans.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      578
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!