Recommended Posts

Thoughts for hardmode this week:

  • Shannox: We did him on saturday(?) with "badly geared" alts (mix of blues, greens, 353/359 epics. Best geared toon is my paladin which had full normal mode raid gear but not 4 piece). The thinking was "If we pretend this is hard mode and use the same strategy then maybe we'll be able to pick it up for reals on Tuesday
  • Baelroc: Our guild has solid DPS: we consistently rank top-100 from the start to end of content. In order to kill this fight on 10-man you can assume 2 tanks averaging 10k DPS each, and 5 DPS pulling just shy of 29k DPS (which we don't have) or 6 DPS pulling just shy of 24k DPS (which we do have). After Sinestra, BQL, Yogg, Council, etc. we're pretty good at handling brain-link beams.
  • Beth'tilac: We dominated the fight on normal mode. The hard mode version seems to be similar but with an extra add you have to kite around and kill. Fortunately we did sinestra and twilight council so we've pretty much got that on lock-down.
  • Domo: Same basic encounter except you get a pretty sweet damage/healing buff. We're actually going to get an orb phase (we killed him in 4 phase-changes on normal mode so we didn't see it) but the basic "stand near X until Y happens" doesn't seem to scary. If it's going to cause a problem I bet it'll be the hard enrage. Fortunately we've got an affliction lock, shadow priest, and fire mage that can cheese the hell out of the extra damage buff.
  • Ryolith is now Viscidus on hard mode: nobody wants to do that garbage.
  • Alysrazor: add in the Sindragosa cubes requirement, this will probably be a huge pain in the ass, it's low on our list too. I have some thoughts about how we might go about killing it, but I think my plan is ultimately a "cheese it" strategy. Worth a try, but probably something we'll have to work at.
  • Ragnaros. We all want our fancy title but he's pretty low on the list based on the assumption that everything else is easier.

Rightly now there are two guilds we're in competition with: a 10-man startup horde side that picked up a rag kill a day or two after we did (but finished Tier 11 9/13). I'm hoping they do well because there really aren't any good 10m guilds on the server if you don't count mine. There's also a 25m alliance side that many of my friends raid in (I have an alt there and helped shuffle a trinket cross faction for their tank yesterday). They ended up 12/13 but are very good players and I expect them to do very well.

The other 25s on our server didn't manage to unlock hard mode for this week. The better ones tried making a 10m groups to put a couple of days work into Rag. and unlock hard modes for this week but I guess they just couldn't put it together. I had expected the server to have half a dozen 7/7 guilds for this lockout but I guess I estimated poorly. I'm sure they'll get him soon enough but in the mean time they've lost a week of hard mode practice. While ultimately I consider our competition region or world-wide, I care more about winning the local rat-race. It's much easier to get excited about a competition with friends/enemies that you'll encounter on a weekly basis than people that you'll never meet.

Raid starts in 3 hours?

Wanna make a video from a fraps recording but want to make it in HD and want the quality to be really good (on youtube as well) ... any ideas how to do this. Windows Movie Maker just does not cut it and the quality on youtube is bad and blurry even when I used the HD wmv stuff. Any ideas on software and codecs that a required to produce a good quality move?

I fraps my raw footage at 1080p60 with "force losseless rgb" enabled. I've got a simple raid-0 set of 5400 RPM drives that I dump the raw video too. it burns up about 8gb per minute so you'll need fairly large drives.

When I'm done I dump that into Virtualdub to crank out a quick and dirty AVI (1080p30) which I import into premier. Edit in premier (increase brighteness about 5% because youtube will crush it) and when you're done render out the video at 1920x1072 at 30fps. The 72 is needed because youtube does some weird resizing and you want the vertical size to be an even multiple of 16 for best final quality (otherwise it'll resize to 1072, do it's encoding, then resize back, that makes everything blurry).

For final output I use h.264 with a target bitrate of 16mbit and a maximum bitrate fo 20mbit. Your final product should be about 1gb for every 5 minutes of video.

There's no real trick other than record at the highest possible quality, render out at a high bitrate to 1920x1072, 30 FPS, and increase the brightness slightly.

I fraps my raw footage at 1080p60 with "force losseless rgb" enabled. I've got a simple raid-0 set of 5400 RPM drives that I dump the raw video too. it burns up about 8gb per minute so you'll need fairly large drives.

When I'm done I dump that into Virtualdub to crank out a quick and dirty AVI (1080p30) which I import into premier. Edit in premier (increase brighteness about 5% because youtube will crush it) and when you're done render out the video at 1920x1072 at 30fps. The 72 is needed because youtube does some weird resizing and you want the vertical size to be an even multiple of 16 for best final quality (otherwise it'll resize to 1072, do it's encoding, then resize back, that makes everything blurry).

For final output I use h.264 with a target bitrate of 16mbit and a maximum bitrate fo 20mbit. Your final product should be about 1gb for every 5 minutes of video.

There's no real trick other than record at the highest possible quality, render out at a high bitrate to 1920x1072, 30 FPS, and increase the brightness slightly.

Thanks for the tips. I saw the 1072 side and though it was weird strangely enough I have already started to encode the video so ill see how it looks after. Hard drive space might be an issue. Only have a 256GB SSD in my laptop and its pretty full so recording Lossless through fraps might pose some issues with size, seen as though its a laptop (alienware) it might not perform well and lag to hell whist I am online.

Man HMs, I'd be happy to see those before the end of summer. Got our first kill tonight with Beth. RNG was in my favor with a S10 trinket off occ, S9 pants off argaolth, the Xbow on like our 3rd trash pull in firelands and the shoulders I can't use for now off Beth. Losing my 4 piece is a big dps loss and I have to wait to use my new shiny piece.

So....any guilds recruiting a ret pally? I've cleared normal Firelands. :p

I might be. How do you feel about having a tank offspec that gets used 30-60% of the time?

Shannox died. Ryoloith is "messy" but hopefully tonights hot-fixes will help. Beth'tilac might be possible but we're probably not doing her next (punishment is high for failure, but if we can solve positioning it's within grasp).A handful of pulls could just barely keep downstairs together for one full phase. Forum posts indicated that her adds had the same health in 10 and 25m so maybe maloriaks old bugs had made a return. We moved on to other encounters for now.

I'm curious about the buff to Baleroc: 10% probably puts him out of our reach this week unless we tried a 1 tank/2 healer strategy like we used for council. A buff of 15%+ probably makes him unreachable without more gear.

I'm glad they buffed hard modes, it's retarded guilds are already 4/7 heroic in the 2nd week of the raid. Unless the next 3 bosses are at an insane difficulty level they will be farming Firelands till whatever raid comes out next for the next 5 months.

I recently switched my OS to holy since I found I never tanked as prot (and my prot gear was not that good).

I'm glad they buffed hard modes, it's retarded guilds are already 4/7 heroic in the 2nd week of the raid. Unless the next 3 bosses are at an insane difficulty level they will be farming Firelands till whatever raid comes out next for the next 5 months.

I'm glad they're hard but I don't think blizzard will be able to stop top-end (the top ~150 players total) players from quickly clearing content.

The day Sunwell came out SK went 3/6 and then ran into a gate. Eredar twins died the day the gate opened in the UK. M'uru the guild breaker and Kil'Jaeden both lasted lasted < 96 hours from the time their gates opened. Black temple was cleared during the second raid lock-out. etc.etc.etc.

The only way to gate content 'naturally' is to have DPS/tank/healer checks that require a substantial portion of loot from an instance. They could tune Domo so he required ~38,000 DPS from a raid that assume 7 or 19 DPS, but in doing so you you have to contend with raids just stacking multiple overpowered classes. A single target tank and spank could be substantially easier if you just brought 10 arcane mages (or shadow priests, or MM hunters, or whatever flavor of the month is on top right now). If you tune to make it challenging even if a guild does that sort of thing then you're blocking out almost the entire raiding population that simply can't do that.

It's not realistic to make an encounter with a substantial tank gear check either because classes will stack enternal damage cooldowns to compensate. Unless they introduce "gimmick" gear sets (resist gear being the obvious example) there's no reasonable way to make a punishing tank gear check that wouldn't be easily met by top-end guilds.

Let's remember that Paragon was 13/13 at the end of January and yet how many people managed to match that?

If I remember right Paragon was the only kill of HM LK 25 for a couple weeks, the next guild to kill it didnt do it till the buff was @ 15% I believe which was like a month or so later.

Keep in mind he was gated with only a handful of attempts to pull him. While other guilds certainly guilds certainly could have given him hell, most people probably only had a dozen or so pulls to try him because clean kills of Putricide, Sindragosa, and to a lesser extent BQL and Saurfang probably weren't happening for the first few weeks even for very good guilds.

Even today, 3/7 would make you #6 US - I don't think that's completely out of the question for top end guilds. If you want "real hard mode" (or "easy mode being cleared by baddies" depending on your bias) then look at 10m progress. 2/7 ties you for the second best 10 man guild in the world, 3/7 ties you for 14th best for both sizes and makes you the best 10m group on earth. We're talking about the best 350 players in the world being 4/7.

The number of players raiding today is larger than the number playing organized basketball at any level (highschool, NCAA, NBA, Olympic). The number of players even attempting hard mode (or going 12/13 HM last tier) is about on par with the number of College + Olympic players around the world. The number of 4/7+ players is smaller than the number of people in the NBA, and the number of people who have seen 5/7 would barely make a Lakers v. Bulls game possible.

Can someone explain to me the general idea of a MMORPG? I loved WarCraft III and would like to try this one out.

From what I can gather, you meet up with a bunch of people. Now, when you join a clan (party, whatever) do you all set out on the same quest and fight the same enemies? Are there quests designed specifically for parties (meaning they require 5+ players to beat)? I realize these are pretty general and rookie questions...gotta start somewhere I guess :)

Thanks.

World of Warcraft is a game that allows you to play alongside thousands of others interacting through real time. You have a choice of faction (Alliance/Horde) and have several race choices such as; Human, Dwarven, Night Elf, Gnome, Drenai, Worgen, Blood Elf, Tauren, Troll, Undead, Goblin, Orc. You then choose your Class such as; Mage, Warlock, Priest, Druid, Shaman, Warrior, Death Knight, Paladin, Hunter, Rogue.

Once that is complete you start in a Starting Area, and you begin the long process of leveling your character through Questing, Dungeons (instances), PvP (Player vs Player), and Solo grinding for professions(Alchemist, Blacksmith, Engineering...etc). Keeping in mind that thousands of others are playing and doing the same things you are at the same time, you see them, you talk to them, you fight them, and eventually you may join them in a Guild.

The immersion is great, there is plenty to do (through leveling) that will keep you occupied, and if you like battling it out with others there are Battlegrounds/Arenas.

There are several expansions that add content/gameplay changes, and there is a constant progression for your character.

Now...I will say that there is an ongoing shift in the game that has caused alot of controversy, debate, and anger over recent changes. If you're new it isn't something that you will really notice too much while leveling your character, however, once you reach 85...well...You can make up your own mind. If you decide to play...good luck.

-Seth

You forgot about WoW's biggest trait, and that is raiding. Getting 10 or 25 guys to play together and down a boss with quite a few mechanics is a challenge in itself.

He's responding to a post made nearly 7 years ago.

Encounter is a little stressful (you can tell from the voices) - we spent a couple of hours with really bad strategy (ie: trap one dog then the other: alternating) which made instant-deaths much more likely. We had a bunch of sub-optimal things going on. Only the mage and I could reliably break facerage. I was the only person consistently able to be in range of the dog to snare it (howl wasn't reliably being applied), and we couldn't set off fire traps as much as we'd like so the playing field was a little messy. Ultimately a pretty fun encounter - it's a shame it's so annoying to get to the boss and clear a place to fight him.

I inherited a copy of Final Cut Pro X from a friend who bought it and promptly said "this is worthless". To me it seems like a nice version of iMovie but really not aimed at professional video editors?yet. I played with it's integrated youtube sharing but forgot to do the whole 1072 thing so quality is a bit off. I should probably output to prores and then re-encode with compressor because quality is a little crappy. Mostly it's not a bad editing environment for this sort of thing: ~10 minutes from "raw fraps encode" to pressing the "share with youtube" button is pretty good turn around time. The ability to do distributed rendering is kinda cool. I have half a dozen macs in the house so if it worked I could cut final exports from say 45 minutes to 10 minutes which would be awesome. I never really liked premier but it was paid for by my last job so it was my only option outside of iMovie (which didn't allow for some of the things I'd like to do).

I'll probably stick with it for this tier worth of videos, it seems really well suited for wow video editing. For $300 it's probably worth considering instead of the other popular options (vegas and premiere) provided you have a mac to run it on.

Anyone remember the guy that made the program to sync addons from OSX and Windows? I'm finding myself switching back and forth quite a lot now and its getting a little annoying having to keep installing and uninstalling addons from one to another.

Anyone remember the guy that made the program to sync addons from OSX and Windows? I'm finding myself switching back and forth quite a lot now and its getting a little annoying having to keep installing and uninstalling addons from one to another.

Curse Client may do the trick mate.

Anyone remember the guy that made the program to sync addons from OSX and Windows? I'm finding myself switching back and forth quite a lot now and its getting a little annoying having to keep installing and uninstalling addons from one to another.

This? https://www.neowin.net/forum/topic/966070-world-of-warcraft-addon-syncing-app-beta-testers-wanted/ also this http://www.kennettnet.co.uk/products/teleportaddons/

So - Here's a little story...

I rerolled on Silvermoon EU as I had 1 of each class over 80 (3 of them 85) and I wanted to play them all as I liked each of them. I hated the feeling of not spending enough time on a particular char so rolled a DK and I have every intention of sticking to the 1 char from now on.

It took me 2 weeks to be 85 tanking heroics as I lvl'd blood and spammed dungeons. Last friday I was asked by my guild to tag along and do some offtanking in their BWD/ BoT run, I said sure and could possibly get some loots.

At the end of the night we had cleared BWD and BoT and went on to also clear TotFW. I knew they nerfed them but Geez! The last time I raided was March on my hunter and we were getting 1 maybe 2 bosses down in either BWD or BoT with no intention of stepping into TotFW yet.

I now have 1 peice short of a full tier DPS set with a couple of extra Tanking items.

http://eu.battle.net...systolic/simple

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • On the topic of being locked out of a service. Recently two different friends of mine got locked out of their Google accounts. Both were hack attempts and one of them is waiting 30 days before he can get back in. He had backup codes and MFA but not a passkey. It was a browser token hack. Anyhow he has to wait 30 days for the dispute or whatever to end. The other person only had a password and is screwed losing all of the email, docs and years of photos. Google won’t help her at all. Her fault because she had no backup/recovery setup. Enable passkeys if possible. Also do NOT use browser based password managers. If using a cloud service make sure it is one you can fully sync to one of your devices so you can back it up. Like a PC or Mac with some backup drive plugged into it. Google is the worst to use IMHO. You can’t sync your photos at all. You have to use the “Take Out” service which is manual and takes days. That service strips the meta data from your photos. Also Google Docs synced to a device are useless without a Google accounts. MS Office/Libre Office is not going to open a link to a Google doc to a dead account.
    • Why you need to take back control of your synced passwords and how to go about doing that by Paul Hill Credit: Pixabay Last month, when Google decided to introduce daily and weekly caps for Gemini, it reignited an anxiety of mine, that you can’t really depend on service providers to maintain features forever, and it got me looking into free software (as in freedom) in other areas too. One app I quickly came across was KeePassXC on desktop and KeePassDX on Android as an alternative to password manager lock-in within the Chrome or Firefox ecosystems. I personally like to switch around with browsers, and using either password manager is inconvenient, so something like KeePassXC was interesting to me. The main issue with it now is syncing; I was not sure how to do that. After a bit of research, I came across Syncthing, a tool I was vaguely familiar with but had never used because it seemed complicated. However, I was completely wrong, and honestly, I think everyone should use it if they use multiple devices. It essentially lets you share folders peer to peer across all of your devices, no cloud services that you don’t control necessary! And it was fairly simple to set up, if not a bit clunky. Since setting it up, I’ve also started using Syncthing to back up other apps too, so don’t think it’s limited to just saving password databases. You can use it for pretty much anything you use Dropbox or Google Drive for. Before continuing to talk about those apps a bit more, let’s walk back a bit and talk about browser sync. Ever since the late 2000s and early 2010s, really, since we have been using smartphones, browser sync has been a necessity of life. I don’t know about you, but I have hundreds of passwords saved. For the most part, they’re all unique, so I don’t remember them and rely on software to manage them for me. Until recently, I’ve relied on password managers in Chrome and Firefox, but what I always found annoying was that it can be hard to transfer them between browsers. Sure, on Windows it is simple enough, but on Linux, exporting bookmarks has been temperamental. It works OK nowadays, but not too long ago, Chrome required you to enable exporting passwords in chrome://flags. The situation is even worse on mobile; there is no exporting or importing of passwords of any kind. You literally have to do it on a desktop, which is incredibly annoying in our mobile-first world. Sync also lets us take out bookmarks, history, tabs, and autofill data easily. To enable sync, it’s just a matter of signing into the browser once, and it handles the rest. It’s nice and easy. Obviously, all this has some issues, including those I’ve outlined above about it being hard to transfer data between browsers, but also things such as account suspension, lost account passwords, and other lock-in mechanisms, such as passkeys, being tied to a specific browser. On a sidenote, I have just removed all of my passkeys because they can make it harder to move browsers. I think the biggest threat to your synced passwords, especially if doing this with Google, is having your account suspended. I don’t ever expect mine to be suspended, but you do hear horror stories on Reddit where people lose access to their Google accounts. Imagine if you have hundreds of passwords, then suddenly lose access to them because Google froze your account, what would you do? So yes, it can be nice to use these syncing services for their convenience, but they also have risks. You may have seen me going on about free software quite a bit in my editorials. It’s essentially a concept championed by the Free Software Foundation. It’s software under particular licenses that grant you four freedoms: run the program for any purpose (0), study and change the source code (1), redistribute copies to others (2), and the freedom to distribute modified copies to others (3). For example, if there is an app I use and one day it gets abandoned by the developer, I can keep running it or even clone the software and continue developing it. Look at the myriad of cool services Google has run over the years before killing them. You can’t take the source code for those because they are proprietary, for the most part. Both KeePassXC and Syncthing are free software, so I get the freedoms listed above. In my use case where I’m syncing a database full of my passwords, I also get proper ownership over my data, there is no losing access to the database due to a frozen account, I can access the code of the tools I’m using, and I can get support from real people online if I run into issues, rather than having to consult a vague help page from an opaque company. With the KeePassXC password manager, you create a .kdbx file, which is what will be synced between devices. KeePassXC has cross-platform apps and also has browser extensions so that the browser can fetch passwords from the database once it is unlocked. Meanwhile, Syncthing is a peer-to-peer file sync tool where you can select folders to sync between your devices. Just pop files in the folders you choose, and then they will be available across your other devices whenever they come online. Syncthing is resilient as it works over both LAN and the internet and only ever sends content between your devices, never to a third-party server somewhere else. By combining these two pieces of software, you can essentially replicate the browser sync functionality. I have had a weird, conflicting issue where a new file is appearing, but it doesn’t seem to be impacting my main password database, which is updating between devices just fine. If you want to get a setup similar to what I have, you will need to go here to download KeePassXC for your computer. Once you have that, you will need to download your passwords from your web browser to a CSV file. In Chrome, you can type chrome://password-manager/settings into the URL bar, and you should see an option to download your passwords under Export Passwords. This will give you the CSV file you need for importing into KeePassXC. If you use a different browser, just use a search engine and type “browser-name export passwords” and muddle along. In KeePassXC, you’ll want to press Import File from the home screen, select the CSV file, and create a new database from it. On one of the screens of the wizard, there will be a Title field with a drop-down selected to none. Change this to Title and continue. You’ll select a name for the database, the encryption level (the defaults are fine), and then you will pick a password. I would choose four unrelated words that are easy for you to remember, as you’ll be typing them fairly often to access your passwords. When you have all your passwords in your new database, you will want to set up the browser extension so that your browser can fetch passwords from KeePassXC. Rather than explain how to do that here, refer to KeePassXC’s guide on how to set it up properly. Once you’ve got that set up, you want to install KeePassDX on Android. You can grab it on the F-Droid store and the Google Play Store. For iPhone users, there are other .kdbx-supporting apps, but I haven’t tried any of them, so have a look around and use what suits you. Once you have that done, you will want to install Syncthing on your computer and find a third-party app for your mobile device. On Android, I use an app called BasicSync; there are also options for iOS, but again, I’ve not tried these. Once you’ve got SyncThing, you’ll want to set it up and connect all of your devices together and share a folder between your gadgets. PCWorld has a good tutorial on setting up a synchronized file between your devices using SyncThing. Once you’ve set it up, congrats, you’ll never have to touch that stuff again except for adding or removing devices. I’ll be honest, I didn’t particularly like setting up Syncthing. It didn’t take me a massive amount of time, but I think I had to check online because I found it a bit confusing. That said, I’ve had it running for several weeks now and never need to touch the Syncthing settings, so that’s very nice. I also mentioned a conflicting file. I’m not sure why this is appearing, but the main .kdbx file seems to be updating and syncing just fine. What’s nice is that both KeePassXC and Syncthing are free software, so they won’t just vanish one day; you can take the code and fork the project or use a range of alternative implementations that others have made. It’s also nice that it works over LAN, so even if your ISP is having problems, your passwords will still sync. One area where you will want to be a bit more careful with this setup is if you only have one device. I am OK because I have a computer and two phones, all synced up. If you just have one device, you will probably want to store a backup of your .kdbx file somewhere else. Obviously, you’ll also want to remember your password really well, too. If you get locked out, it's game over. Overall, if you want to take back control of your computing from big tech, taking control of your passwords is an important part of this. You don’t need to immediately clear out your browser’s password manager; try running KeePassXC and the password manager concurrently for a while to see if you run into any problems. If you do try this out, let us know some other creative ways to use Syncthing. I haven’t really come up with a solution about what to do with my bookmarks, for example.
    • If the price was a dollar, someone would complain "Why isn't it free?" If it was free, someone would complain they weren't being paid to play it.
    • That lens of history will burn if you hold it at the right angle... Warn users too late: Shame, Microsoft! That extremely minor update to an obscure Control Panel widget required 2 years of warning. Warn users too early: Shame, Microsoft! We've got better things to do. Pipeline and process be damned, we'll just always be disappointed, eh?
    • Microsoft Paint used to be my favorite Windows app as a kid, and it's still pretty good by Usama Jawad I have been using Windows since the early 2000s, when I was around 10 years old or so. I vaguely remember playing around with Windows 98 and Windows 2000, but that may have been on school PCs which had old operating systems installed. My main OS on the home PC, and the one I recall spending most time with, was Windows XP. At that time, I used the home PC to create Word and PowerPoint documents for school, but a lot of the time, I simply used it to play games. My dad would bring game discs which we would try and install on the PC, sometimes unsuccessfully, and sometimes, we would rely on flash games in the browser, like Bubble Trouble on Miniclip. However, the problem with the latter approach was the internet speed. On a good day, our dial-up internet would offer us speeds of 56 kbps, but on most days, it was closer to 33 kbps. This did not facilitate online gaming as I would often have to wait minutes for a game to load or "draw" on the screen, and trying to download pirated games wasn't simple either. I remember getting tired of waiting for online games to load and just downloading simulator games from the Big Fish Games website instead, only to be disappointed after finding out that I was just being given access to trial versions of the title, and I needed to fork out money to pay for the full version. All of this is to say that it wasn't very easy to find entertainment options on the home PC when I was a kid, due to a number of reasons, mostly outside of my control. This situation pushed me towards a rather unconventional ally: Microsoft Paint. Whenever the internet wasn't working as good as I expected, I would simply spin up Paint and draw complete rubbish on the canvas. Of course, that wasn't always the intention, but it usually happened when I messed up drawing a straight line or something, and then I would give up on that particular piece and simply draw a random collection of objects. Microsoft Paint was extremely accessible and easy to use. Even if you weren't an artist, you could quickly understand the tools at your disposal and how to leverage them on a canvas. The absolute breadth on offer ensured that each painting was truly unique, as you could utilize various combinations of tools like the pencil, paint, spray paint, and more to truly personalize your creation. Since I wasn't particularly good at drawing both on digital screen or a physical screen, I remember that my main style of art would be to insert a bunch of randomly intersecting lines and then fill them with random colors through the paint can. I have trying to replicate that art style in the latest version of Paint below, and as you can see, it's truly Pablo Picasso-esque. The human imagination truly knows no bounds Microsoft Paint kept me occupied for hours and was my best friend when video games on the home PC were inaccessible for one reason or the other. There was no academic or professional reason for which I would need to use Paint, but I still loved using it in my personal time, even if what I created wasn't worth being shown to anyone. It was simply fun. Fast-forward to today, and the situation is mostly the same. Now that I am almost 29 years old, and I still have no reason to use Microsoft Paint in a professional capacity. In fact, I don't even use it in a personal capacity, except to dabble with it from time to time, just to see if core functionalities are still intact. And I'm happy to say that I think Microsoft Paint still offers the same accessibility and inviting experience that it did to me a couple of decades ago, even though its UX has been refreshed and it's been integrated with Copilot features. Interestingly, things could have been a lot different, had Microsoft had its way. Microsoft Paint was marked for deprecation with the Windows 10 Fall Creators Update in 2017, and even began displaying a product retirement alert, urging customers to shift to Paint 3D instead. Fortunately, after consumer backlash, Microsoft reversed course on this decision, and Paint continues to be a native app inside Windows installations that can also be updated quite frequently through the Microsoft Store. Instead, Paint 3D ended up on the chopping block, which is for the better, I think. I have intermittently played around with Microsoft's refreshed Paint experience in the past few years, and I do think it has received worthwhile upgrades. the UI and the UX has been modernized while retaining core functionality, and the app is still fairly easy to use. It doesn't meet any of my use-cases, but I've never really had any use-cases ever, as described previously. Of course, the elephant in the room is the Copilot integration. Personally, I believe that this is one place where Copilot does make sense, environmental concerns aside. I know that a lot of creatives use AI to generate images, and while some may be using professional alternatives, Paint still offers a decent casual experience, with the power of Copilot. Of course, you do need to have a valid Microsoft 365 Copilot license and available credits to use it, but even if you don't, you still get the big Copilot button in the toolbar, unfortunately. All in all, I am glad that Microsoft Paint continues to be a native feature in Windows 11, and a piece of software that has evolved to meet modern needs without cutting off its own roots. It's just an iconic piece of Windows history that was an essential part of my childhood, and while I don't use it anymore, I'm just glad it is still there.
  • Recent Achievements

    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
    • One Year In
      hhgygy earned a badge
      One Year In
    • Week One Done
      AMV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      163
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!