Recommended Posts

Thoughts for hardmode this week:

  • Shannox: We did him on saturday(?) with "badly geared" alts (mix of blues, greens, 353/359 epics. Best geared toon is my paladin which had full normal mode raid gear but not 4 piece). The thinking was "If we pretend this is hard mode and use the same strategy then maybe we'll be able to pick it up for reals on Tuesday
  • Baelroc: Our guild has solid DPS: we consistently rank top-100 from the start to end of content. In order to kill this fight on 10-man you can assume 2 tanks averaging 10k DPS each, and 5 DPS pulling just shy of 29k DPS (which we don't have) or 6 DPS pulling just shy of 24k DPS (which we do have). After Sinestra, BQL, Yogg, Council, etc. we're pretty good at handling brain-link beams.
  • Beth'tilac: We dominated the fight on normal mode. The hard mode version seems to be similar but with an extra add you have to kite around and kill. Fortunately we did sinestra and twilight council so we've pretty much got that on lock-down.
  • Domo: Same basic encounter except you get a pretty sweet damage/healing buff. We're actually going to get an orb phase (we killed him in 4 phase-changes on normal mode so we didn't see it) but the basic "stand near X until Y happens" doesn't seem to scary. If it's going to cause a problem I bet it'll be the hard enrage. Fortunately we've got an affliction lock, shadow priest, and fire mage that can cheese the hell out of the extra damage buff.
  • Ryolith is now Viscidus on hard mode: nobody wants to do that garbage.
  • Alysrazor: add in the Sindragosa cubes requirement, this will probably be a huge pain in the ass, it's low on our list too. I have some thoughts about how we might go about killing it, but I think my plan is ultimately a "cheese it" strategy. Worth a try, but probably something we'll have to work at.
  • Ragnaros. We all want our fancy title but he's pretty low on the list based on the assumption that everything else is easier.

Rightly now there are two guilds we're in competition with: a 10-man startup horde side that picked up a rag kill a day or two after we did (but finished Tier 11 9/13). I'm hoping they do well because there really aren't any good 10m guilds on the server if you don't count mine. There's also a 25m alliance side that many of my friends raid in (I have an alt there and helped shuffle a trinket cross faction for their tank yesterday). They ended up 12/13 but are very good players and I expect them to do very well.

The other 25s on our server didn't manage to unlock hard mode for this week. The better ones tried making a 10m groups to put a couple of days work into Rag. and unlock hard modes for this week but I guess they just couldn't put it together. I had expected the server to have half a dozen 7/7 guilds for this lockout but I guess I estimated poorly. I'm sure they'll get him soon enough but in the mean time they've lost a week of hard mode practice. While ultimately I consider our competition region or world-wide, I care more about winning the local rat-race. It's much easier to get excited about a competition with friends/enemies that you'll encounter on a weekly basis than people that you'll never meet.

Raid starts in 3 hours?

Wanna make a video from a fraps recording but want to make it in HD and want the quality to be really good (on youtube as well) ... any ideas how to do this. Windows Movie Maker just does not cut it and the quality on youtube is bad and blurry even when I used the HD wmv stuff. Any ideas on software and codecs that a required to produce a good quality move?

I fraps my raw footage at 1080p60 with "force losseless rgb" enabled. I've got a simple raid-0 set of 5400 RPM drives that I dump the raw video too. it burns up about 8gb per minute so you'll need fairly large drives.

When I'm done I dump that into Virtualdub to crank out a quick and dirty AVI (1080p30) which I import into premier. Edit in premier (increase brighteness about 5% because youtube will crush it) and when you're done render out the video at 1920x1072 at 30fps. The 72 is needed because youtube does some weird resizing and you want the vertical size to be an even multiple of 16 for best final quality (otherwise it'll resize to 1072, do it's encoding, then resize back, that makes everything blurry).

For final output I use h.264 with a target bitrate of 16mbit and a maximum bitrate fo 20mbit. Your final product should be about 1gb for every 5 minutes of video.

There's no real trick other than record at the highest possible quality, render out at a high bitrate to 1920x1072, 30 FPS, and increase the brightness slightly.

I fraps my raw footage at 1080p60 with "force losseless rgb" enabled. I've got a simple raid-0 set of 5400 RPM drives that I dump the raw video too. it burns up about 8gb per minute so you'll need fairly large drives.

When I'm done I dump that into Virtualdub to crank out a quick and dirty AVI (1080p30) which I import into premier. Edit in premier (increase brighteness about 5% because youtube will crush it) and when you're done render out the video at 1920x1072 at 30fps. The 72 is needed because youtube does some weird resizing and you want the vertical size to be an even multiple of 16 for best final quality (otherwise it'll resize to 1072, do it's encoding, then resize back, that makes everything blurry).

For final output I use h.264 with a target bitrate of 16mbit and a maximum bitrate fo 20mbit. Your final product should be about 1gb for every 5 minutes of video.

There's no real trick other than record at the highest possible quality, render out at a high bitrate to 1920x1072, 30 FPS, and increase the brightness slightly.

Thanks for the tips. I saw the 1072 side and though it was weird strangely enough I have already started to encode the video so ill see how it looks after. Hard drive space might be an issue. Only have a 256GB SSD in my laptop and its pretty full so recording Lossless through fraps might pose some issues with size, seen as though its a laptop (alienware) it might not perform well and lag to hell whist I am online.

Man HMs, I'd be happy to see those before the end of summer. Got our first kill tonight with Beth. RNG was in my favor with a S10 trinket off occ, S9 pants off argaolth, the Xbow on like our 3rd trash pull in firelands and the shoulders I can't use for now off Beth. Losing my 4 piece is a big dps loss and I have to wait to use my new shiny piece.

So....any guilds recruiting a ret pally? I've cleared normal Firelands. :p

I might be. How do you feel about having a tank offspec that gets used 30-60% of the time?

Shannox died. Ryoloith is "messy" but hopefully tonights hot-fixes will help. Beth'tilac might be possible but we're probably not doing her next (punishment is high for failure, but if we can solve positioning it's within grasp).A handful of pulls could just barely keep downstairs together for one full phase. Forum posts indicated that her adds had the same health in 10 and 25m so maybe maloriaks old bugs had made a return. We moved on to other encounters for now.

I'm curious about the buff to Baleroc: 10% probably puts him out of our reach this week unless we tried a 1 tank/2 healer strategy like we used for council. A buff of 15%+ probably makes him unreachable without more gear.

I'm glad they buffed hard modes, it's retarded guilds are already 4/7 heroic in the 2nd week of the raid. Unless the next 3 bosses are at an insane difficulty level they will be farming Firelands till whatever raid comes out next for the next 5 months.

I recently switched my OS to holy since I found I never tanked as prot (and my prot gear was not that good).

I'm glad they buffed hard modes, it's retarded guilds are already 4/7 heroic in the 2nd week of the raid. Unless the next 3 bosses are at an insane difficulty level they will be farming Firelands till whatever raid comes out next for the next 5 months.

I'm glad they're hard but I don't think blizzard will be able to stop top-end (the top ~150 players total) players from quickly clearing content.

The day Sunwell came out SK went 3/6 and then ran into a gate. Eredar twins died the day the gate opened in the UK. M'uru the guild breaker and Kil'Jaeden both lasted lasted < 96 hours from the time their gates opened. Black temple was cleared during the second raid lock-out. etc.etc.etc.

The only way to gate content 'naturally' is to have DPS/tank/healer checks that require a substantial portion of loot from an instance. They could tune Domo so he required ~38,000 DPS from a raid that assume 7 or 19 DPS, but in doing so you you have to contend with raids just stacking multiple overpowered classes. A single target tank and spank could be substantially easier if you just brought 10 arcane mages (or shadow priests, or MM hunters, or whatever flavor of the month is on top right now). If you tune to make it challenging even if a guild does that sort of thing then you're blocking out almost the entire raiding population that simply can't do that.

It's not realistic to make an encounter with a substantial tank gear check either because classes will stack enternal damage cooldowns to compensate. Unless they introduce "gimmick" gear sets (resist gear being the obvious example) there's no reasonable way to make a punishing tank gear check that wouldn't be easily met by top-end guilds.

Let's remember that Paragon was 13/13 at the end of January and yet how many people managed to match that?

If I remember right Paragon was the only kill of HM LK 25 for a couple weeks, the next guild to kill it didnt do it till the buff was @ 15% I believe which was like a month or so later.

Keep in mind he was gated with only a handful of attempts to pull him. While other guilds certainly guilds certainly could have given him hell, most people probably only had a dozen or so pulls to try him because clean kills of Putricide, Sindragosa, and to a lesser extent BQL and Saurfang probably weren't happening for the first few weeks even for very good guilds.

Even today, 3/7 would make you #6 US - I don't think that's completely out of the question for top end guilds. If you want "real hard mode" (or "easy mode being cleared by baddies" depending on your bias) then look at 10m progress. 2/7 ties you for the second best 10 man guild in the world, 3/7 ties you for 14th best for both sizes and makes you the best 10m group on earth. We're talking about the best 350 players in the world being 4/7.

The number of players raiding today is larger than the number playing organized basketball at any level (highschool, NCAA, NBA, Olympic). The number of players even attempting hard mode (or going 12/13 HM last tier) is about on par with the number of College + Olympic players around the world. The number of 4/7+ players is smaller than the number of people in the NBA, and the number of people who have seen 5/7 would barely make a Lakers v. Bulls game possible.

Can someone explain to me the general idea of a MMORPG? I loved WarCraft III and would like to try this one out.

From what I can gather, you meet up with a bunch of people. Now, when you join a clan (party, whatever) do you all set out on the same quest and fight the same enemies? Are there quests designed specifically for parties (meaning they require 5+ players to beat)? I realize these are pretty general and rookie questions...gotta start somewhere I guess :)

Thanks.

World of Warcraft is a game that allows you to play alongside thousands of others interacting through real time. You have a choice of faction (Alliance/Horde) and have several race choices such as; Human, Dwarven, Night Elf, Gnome, Drenai, Worgen, Blood Elf, Tauren, Troll, Undead, Goblin, Orc. You then choose your Class such as; Mage, Warlock, Priest, Druid, Shaman, Warrior, Death Knight, Paladin, Hunter, Rogue.

Once that is complete you start in a Starting Area, and you begin the long process of leveling your character through Questing, Dungeons (instances), PvP (Player vs Player), and Solo grinding for professions(Alchemist, Blacksmith, Engineering...etc). Keeping in mind that thousands of others are playing and doing the same things you are at the same time, you see them, you talk to them, you fight them, and eventually you may join them in a Guild.

The immersion is great, there is plenty to do (through leveling) that will keep you occupied, and if you like battling it out with others there are Battlegrounds/Arenas.

There are several expansions that add content/gameplay changes, and there is a constant progression for your character.

Now...I will say that there is an ongoing shift in the game that has caused alot of controversy, debate, and anger over recent changes. If you're new it isn't something that you will really notice too much while leveling your character, however, once you reach 85...well...You can make up your own mind. If you decide to play...good luck.

-Seth

You forgot about WoW's biggest trait, and that is raiding. Getting 10 or 25 guys to play together and down a boss with quite a few mechanics is a challenge in itself.

He's responding to a post made nearly 7 years ago.

Encounter is a little stressful (you can tell from the voices) - we spent a couple of hours with really bad strategy (ie: trap one dog then the other: alternating) which made instant-deaths much more likely. We had a bunch of sub-optimal things going on. Only the mage and I could reliably break facerage. I was the only person consistently able to be in range of the dog to snare it (howl wasn't reliably being applied), and we couldn't set off fire traps as much as we'd like so the playing field was a little messy. Ultimately a pretty fun encounter - it's a shame it's so annoying to get to the boss and clear a place to fight him.

I inherited a copy of Final Cut Pro X from a friend who bought it and promptly said "this is worthless". To me it seems like a nice version of iMovie but really not aimed at professional video editors?yet. I played with it's integrated youtube sharing but forgot to do the whole 1072 thing so quality is a bit off. I should probably output to prores and then re-encode with compressor because quality is a little crappy. Mostly it's not a bad editing environment for this sort of thing: ~10 minutes from "raw fraps encode" to pressing the "share with youtube" button is pretty good turn around time. The ability to do distributed rendering is kinda cool. I have half a dozen macs in the house so if it worked I could cut final exports from say 45 minutes to 10 minutes which would be awesome. I never really liked premier but it was paid for by my last job so it was my only option outside of iMovie (which didn't allow for some of the things I'd like to do).

I'll probably stick with it for this tier worth of videos, it seems really well suited for wow video editing. For $300 it's probably worth considering instead of the other popular options (vegas and premiere) provided you have a mac to run it on.

Anyone remember the guy that made the program to sync addons from OSX and Windows? I'm finding myself switching back and forth quite a lot now and its getting a little annoying having to keep installing and uninstalling addons from one to another.

Anyone remember the guy that made the program to sync addons from OSX and Windows? I'm finding myself switching back and forth quite a lot now and its getting a little annoying having to keep installing and uninstalling addons from one to another.

Curse Client may do the trick mate.

Anyone remember the guy that made the program to sync addons from OSX and Windows? I'm finding myself switching back and forth quite a lot now and its getting a little annoying having to keep installing and uninstalling addons from one to another.

This? https://www.neowin.net/forum/topic/966070-world-of-warcraft-addon-syncing-app-beta-testers-wanted/ also this http://www.kennettnet.co.uk/products/teleportaddons/

So - Here's a little story...

I rerolled on Silvermoon EU as I had 1 of each class over 80 (3 of them 85) and I wanted to play them all as I liked each of them. I hated the feeling of not spending enough time on a particular char so rolled a DK and I have every intention of sticking to the 1 char from now on.

It took me 2 weeks to be 85 tanking heroics as I lvl'd blood and spammed dungeons. Last friday I was asked by my guild to tag along and do some offtanking in their BWD/ BoT run, I said sure and could possibly get some loots.

At the end of the night we had cleared BWD and BoT and went on to also clear TotFW. I knew they nerfed them but Geez! The last time I raided was March on my hunter and we were getting 1 maybe 2 bosses down in either BWD or BoT with no intention of stepping into TotFW yet.

I now have 1 peice short of a full tier DPS set with a couple of extra Tanking items.

http://eu.battle.net...systolic/simple

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      81
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!