An Awsome Honda


Recommended Posts

too bad all wheel drive eats up a bunch of the engine's power, so it never makes it to the wheels...awd is a nice system, but technically a rear wheel drive will perform better with a good driver (take 2 cars identical, but one's rwd and one awd, rwd will win so long as the drivers are capable with their vehicles)

It has serious street cred in the UK - my ass! :no:

That car is OK, but still a big fugly hunk, something built sleek, fast and has and is from italy would earn you street cred.

585611514[/snapback]

Sure... if you can finance my new ferrari or a Lamborghini i will ditch the Honda legend :cool:

:alien:

I'm not sure of the exact year, but some point in the mid 1990s, Acura decided not to give their cars proper names anymore, instead used numbers and letters to represent different models, copying german car makers such as BMW and Mercedes. Other japanese luxory makers, such as Lexus and Infinti, also use the same naming convention. So for Acura, the new Legend became RL, Vigor became TL, and Integra was later known as the RSX.

Actually its Acura TL not RL (honda rsx)

585506747[/snapback]

Can't be bothered to read all this (only read first page), but you're wrong the Acura RL is a Honda Legend:

http://www.webwombat.com.au/motoring/news_...onda-legend.htm

And on another note, do you have any pictures that you've taken of the car, cause right now I'm not so sure you actually own it from what I've heard from you..

With a good driver? A good driver would utilize that beautiful thing called AWD.. S2000's are about the only Hondas I truly like, but the DSM could take it.

585611356[/snapback]

The AWD isn't a huge advantage. I've seen plenty of videos of AWD DSMs getting crushed by FWD cars.

Probably not stock FWD cars. AWD is a huge advantage in acceleration, look at the 60 foot or 0-60 times of any AWD car. For the engine horsepower, it will always be considerably faster than a FWD/RWD car. The problem is maintaining power for an entire quarter mile. But still, there are a lot more restrictions in racing on AWD turbocharged cars than there are on 2WD cars. And for a good reasoin.

Ah but its possibile that a not so rich person could enjoy the luxury and the power of a "real luxury" car without paying that price! thanks to cars like the honda legend

btw Legends are 3.2L V6 300HP standard, It quite powerful you know even for todays standards and its pretty light weight compared to bmw's n benz's = Excellent weight to power ratio and better handling.

585519671[/snapback]

First of all as far as I know the 3.2L that it came with was either 200hp or 230hp, depending on the year. Not the 300hp engine you claim here, but even if you're talking about the new RL it's not a 3.2L engine, it's a 3.5L engine, so no matter what you don't know what you're talking about...

Can't be bothered to read all this (only read first page), but you're wrong the Acura RL is a Honda Legend:

http://www.webwombat.com.au/motoring/news_...onda-legend.htm

And on another note, do you have any pictures that you've taken of the car, cause right now I'm not so sure you actually own it from what I've heard from you..

585612911[/snapback]

Acura RL

Click on the above link if you folks are interesed in the 2005 Variant of my Legend - This is the new version of the original car (even the name has been changed to RL) but hey it still exists!? a cool design with hi tech features and the honda reliablity - this may well be my next car:pp .

This is a bargain Luxury car - cheaper than a lexus and half the price of Similar spec'd mercs n bmw's yet u get even more feature n power

585512411[/snapback]

First of all as far as I know the 3.2L that it came with was either 200hp or 230hp, depending on the year.? Not the 300hp engine you claim here, but even if you're talking about the new RL it's not a 3.2L engine, it's a 3.5L engine, so no matter what you don't know what you're talking about...

585613039[/snapback]

A bit further down the post i changed it to RL after realizing it was a mix up and according to acura.com this model does have 300bhp as standar:huh:h:, All legends after 1995 came with the 3.5L engines as far as i know... besides 0.3 of a liter is not a big difference is i:o:o

From Acura.com

The 2005 Acura RL is not just an all-new, class-leading performance sedan. It's the quintessential luxury sedan. Upon first glance, its dramatic styling beckons. On closer inspection, its countless technological feats are overtly apparent. Case in point: a 300-horsepower, V-6, VTEC? engine and the revolutionary Super Handling All-Wheel Drive? (SH-AWD?).

no, whp generally equals hp. bhp is the odd-ball that in all honesty shouldn't be used by car manufacturers and should be reserved strictly for engine builders selling crate engines

EDIT: I messed up what I said above (I'm not deleting it, cuz I just don't believe in that)...WHP is not a standard measurement (for some odd reason) SAE Horsepower is the industry standard. That is with all power-sucking attachments attached. BHP Is measured at the flywheel with nothing else attached. It is the MAXIMUM output of the engine at the MAXIMUM operating RPM of the engine. In nearly all cases you will not come anywhere near this rpm level, so even then your horsepower will be cut down.

Edited by MR_Candyman

BHP is basically the same as crank HP. That's HP measured at the flywheel. That's what is advertised (in the US) - in Europe you'll often see BHP - which is only slightly different.

Wheel HP is what is measured on a dyno. It is usually about 10-15% lower than crank HP on a 2WD, and more like 20-25% less on a 4WD/AWD.

Edited by threedaysdwn
lol  bhp used till 1971? then why do companies still use it ? lol

585613604[/snapback]

why do SOME companies still use it? Simply, to make it seem like they have more horsepower than the competition. It is in fact required by law to state if it's bhp (at least here in canada). You ever see bhp, then subtract at LEAST 15% and then you'll have a better guess on real useable horsepower

My point Exactly, I was talking about Hondas Engineering Superiority over Bmw's and Benz an

My initial thought on this thread was that it was the funniest thing i've ever read. U are an idiot, and don't know what the hell ur talkn about. Plain and simple. I think everyone here recognized that by the response.

As for your car...decent. The rims made me vomit in my mouth. :x

Sorry to be so harsh. Somebody had to say it.

Probably not stock FWD cars. AWD is a huge advantage in acceleration, look at the 60 foot or 0-60 times of any AWD car. For the engine horsepower, it will always be considerably faster than a FWD/RWD car. The problem is maintaining power for an entire quarter mile. But still, there are a lot more restrictions in racing on AWD turbocharged cars than there are on 2WD cars. And for a good reasoin.

585613035[/snapback]

Actually a FWD will always be faster in a straight line than an AWD (of an otherwise equiviliant car) on dry pavement.

AWD gives you a better launch (so your 60m will be faster), but adds a LOT of weight, and has a much greater drivetrain loss (torque lost between the engine and the wheels).

AWD gains a huge advantage in the wet/snowy/icy/dirt, etc. Anywhere that traction is a priority. AWD can also help a lot in the curves.

If you're talking about supercars with 500-600HP or more, then AWD can help a lot in actually putting that power to the ground. Still, a RWD rear-engine car (think porsche 911) will get plenty of traction in the dry without the added weight and drivetrain loss - and often with better manueverability in the corners.

I am a big fan of AWD/4WD cars. I just like driving them more (That's why I have an Audi A4 w/ Quattro). I also live in NY, so weather affects that decision some.

If I were buying a very high power car like an M5/E55 AMG/RS6 - AWD would also be very important to me. The E55, for example, almost constantly is using its traction control to get the power down. The M5 is a bit better there, but I would feel like I'm making much better use of that 500HP with the RS6 and it's 4WD, and with much more harnessed control.

Despite that, even Audi's fastest racing cars are RWD. The R8 (Le Mans champion), A4 V8 touring car, and I'm pretty sure some of the RS6 racecars are all RWD. Rally cars, of course, are a different story.

ok, let me make this simple...you said acura.com said 300bhp, fair enough.

assuming 80% efficiency (average), then 300bhp*0.80efficiency=240whp

these are just rough calculations. My guess is you're actually getting the 230 that was quoted by somebody else earlier.

proof of calcs: http://www.abacusracing.com/dynoinfo.htm

ok, let me make this simple...you said acura.com said 300bhp, fair enough.

assuming 80% efficiency (average), then 300bhp*0.80efficiency=240whp

these are just rough calculations. My guess is you're actually getting the 230 that was quoted by somebody else earlier.

proof of calcs: http://www.abacusracing.com/dynoinfo.htm

585613630[/snapback]

What are you comparing that to?

Most everyone uses BHP or crank HP (SAE) to compare. WHP is never given by the manufacturer. You'll only find that out if you dyno it, as drivetrain loss will vary by vehicle.

As for names...

When Honda started their American subsidiary, Acura, the first car was the Legend. It was the only car Acura produced for its first years. There eventually came different Legends with different body styles (coupe, 4dr sedan, bigger sedan) - with different engines. Acura later began branding these as the CL (coupe), TL (sedan), and RL (big luxury boat). The names were displayed as "3.2CL" or "3.5RL" - with the engine size displayed first.

The "L" in CL, TL, and RL stood for "Legend." ALL of those cars were the descendants of the original Acura Legend.

They also began selling the Acura Integra (virtually the same as the Honda Integra, except made in the US and tweaked to meet the higher US safety/emissions standards).

Recently, they changed the Legend-based cars to simply be the TL and the RL (I don't think they've launched a new CL yet, but I could be wrong).

They also changed, as Honda did, the Integra's name. The 2-door Integra is now the RSX. The 4-door is the TSX.

What are you comparing that to?

Most everyone uses BHP or crank HP (SAE) to compare.  WHP is never given by the manufacturer.  You'll only find that out if you dyno it, as drivetrain loss will vary by vehicle.

585613636[/snapback]

What do you mean what am I comparing that to? that is the USEABLE horsepower of the vehicle (whp). BHP and SAE measurements also vary a LOT. Do you realise how much strain even a simple air conditioning unit or an alternator causes on the engine? That translates to lost horsepower. I can't be bothered right now to dig up theoretical differences between SAE and BHP, but I'll estimate around 5-7%, let's say 5%. 300*0.95=285 (still not really close to 300)

Edited by MR_Candyman
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Visual Studio finally gets long-awaited feature that developers will love by Usama Jawad Visual Studio Code is Microsoft's popular, lightweight, open-source code editor, it is actually Visual Studio that is the company's flagship integrated development environment (IDE). Although the IDE already offers a boatload of useful features for developers, Microsoft has finally introduced a long-requested capability that will be loved by many. While developers have already been able to create Git pull requests (PRs) directly within Visual Studio for the past couple of years, it had not been possible to review a PR without switching to the browser, until now. Microsoft revealed in December 2025 that it is working on UX that enables developers to do just that, and fast-forward to June 2026, and Visual Studio finally has native capabilities to open and inspect a PR, discuss feedback, and wrap up the review, all without switching to the browser. This integration works for both GitHub and Azure DevOps (including on-prem). Developers have access to multiple surfaces to open a PR, including Git Repository, Git Changes, and the Git menu in Visual Studio. Once you open a PR, all the important details will be immediately visible to you, from where you can navigate to various levels of granularity and branch states, depending on the reviews that you are engaged in. As you would expect, you also get a diff view that enables you to see code changes inline or side-by-side in a separate panel. You can also review commit-by-commit. Additionally, this UX fosters collaboration as you can leave comments, reply to threads, and resolve conversations easily. Naturally, you can also leverage Copilot to apply a code suggestion to fix a potential issue. When you are done, you have the ability to approve, complete, and merge the PR. This is a pretty major feature as it has been requested heavily for the past few years. You can try it out in Visual Studio 2026 version 18.7, made available here recently. Microsoft plans to enhance this experience further in future releases with comment filtering, a timeline of PR activity, and more.
    • This AdGuard Family lifetime deal is still only $15.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 90% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $15.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $15.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • the MCT currently downloads 26200.8653, so not completely up to date.
    • Around 68% of developers are now using AI to generate code during development, and some experts are saying that a single developer using AI tools can now do the work of an entire team of 4 to 5 engineers.  According to Figma's State of the Designer 2026 report, 72% of designers now use generative AI in their workflows and 91% say it improves the quality of their work, not just their speed.  But does this mean web developers and designers are becoming less relevant, or are they simply evolving into a different kind of role? Would love to hear from developers and designers here has AI made your job easier, or do you feel threatened by how fast these tools are improving
  • Recent Achievements

    • Week One Done
      Timaximus earned a badge
      Week One Done
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Rookie
      FBSPL went up a rank
      Rookie
    • First Post
      davidbazooked earned a badge
      First Post
    • Week One Done
      davidbazooked earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      PsYcHoKiLLa
      179
    3. 3
      +Edouard
      160
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!