FAQ / Common Problems & Solutions


Recommended Posts

  Quote
i'm currently downloading the may update and april full for windows2000 and windows xp sp2. after i finish it, can i just slipstream it to my installation cd so i can have an updated windows cd?

no. you might be able to use the updates included along with a copy of nlite to do it however.

I am having a problem running Autopatcher on Xp Home SP2, I have Dec 05 Full release plus all updates including May. I have tried running the Dec 05 Full release on its own, but still the same problem. The problem below is happening. Could someone be a little more specific as to what I can do to fix it?

Common Problems and Solutions:

4) Installation wizzes by in about 10 seconds but nothing installs

Likely cause - you have non-alphanumeric characters in your Windows username!

PS: I have run the above releases on computers with XP Pro SP2 with no problems!

TIA, Cheers, Dave. :)

@davo572, if your windows username contains characters other than just letters and numbers, you need to change it.

to do so: start > click on your user name > home > click on your account > change my name

note, there are sometimes other causes, if that doesnt solve it, read the rest of the thread and search the forum, im sure youll find the cure

  theblazingangel said:

@davo572, if your windows username contains characters other than just letters and numbers, you need to change it.

to do so: start > click on your user name > home > click on your account > change my name

note, there are sometimes other causes, if that doesnt solve it, read the rest of the thread and search the forum, im sure youll find the cure

Thanks theblazingangel!!! I did try to change my "windows username" to MIKE 123 and it didn't work! I will have a search in the forum.

Cheers, Dave. :D

Autopatcher worked fine one one of my PCs, but on my other windows XP setup I had problem 8 in the FAQ. "No text is displayed when autopatcher opens." Knowing I had the correct files and language etc I clicked through the first screen and I got the runtime error 429, so I ran the setup files described in the faq. It worked fine, I'm running XP Pro SP2. Just thought I'd let you know in case someone comes across a similar problem.

  davo572 said:

Thanks theblazingangel!!! I did try to change my "windows username" to MIKE 123 and it didn't work! I will have a search in the forum.

Cheers, Dave. :D

Dave,

I'm having exactly the same problem and i changed my user name to something really simple. I have a fresh install of winXP SP2!!!

Autopatcher ppl - I've searched the forums and can't find any other information about this problem. Please HELP!!!

Luke

I hope you can all find it in your hearts to handle this total newbie question....

I am looking for KB892050. I've run April 06 (full) May (update) June (update). Lots of great stuff there, you guys have put a ton of time into this. But for whatever reason I don't have 892050 (usb problems) installed? Any help here? I saw that it was listed as being included but it has not made to my end.

Thanks

@superjoe96, the only reference to kb892050 is a post in the hotfix thread from 3rd august 2005.

i havent found it mentioned in any of the changelogs i have (which start sept 2005), so i dont believe its been included. the update itself is a non public hotfix (i.e. you need to specially contact microsoft to get it) so therefore its not going to be included.

Hi Guys & Gals,

I have Win XP Pro with SP2 English.

I have downloaded Autopatcher full April 2006, (I installed it to the 3rd partition on my 2nd hard drive).

It is NOT a system partition!

The program ran from this location and I had it install all critical updates, etc.

When I downloaded and tried to run the May Update I get an error that it can not find a full installation!

1.) What do I need to do to get the May & June updates to work?

2.) Do the updates actually modify the Full installation files so that they can be copied over to a CD?

Thank you very much!

Sincerely,

Cin

  • 2 weeks later...
  theblazingangel said:

@cutie_pyie, update releases should be installed on top of full/lite releases.

I am sorry for being confused, but I do not understand what you mean that updates shud be installed "on top" of full/lite releases. :huh:

Please see my first post for what I have done with the April full release (English) and explain to me how to install "on top of".

Thanks a bunch!

Sincerely,

Cin :unsure:

@Blaze

do you want to update link in FAQ to working solution?

General Usage ... Q: Can i use AutoPatcher from a network share?

A: With a mapped share yes! With a UNC path, no, but someone is working on a utility to solve that, see "here".

I'd recommend the "here" link to point to the work around that rtk created

https://www.neowin.net/forum/index.php?show...422251&hl=pushd

:cry: I have read the entire FAQ thread and my question is not anywhere. I installed the April full edition for XP. All seemed to install properly and then when I rebooted I get the Win Xp screen but then just a black screen. No welcome, no sound, no nothing. When I put in my install disk and choose repair (have no clue what I am doing there.) I can see all of the files, but it will not load.

In little baby language, how do I solve this issue. I am a builder, not a code person.

^gaidion69

I recommend posting a new topic on the main page and not in the FAQ

Seems somehting gottcha... choices I can think of would be to:

1. Try to get to safe mode and doa system restore

2. Clean/Full reload of windows, especially since a repair did not work

Hi there,

I am new to Autopatcher, used it and like it a lot. However, after installation on my PC there was no help available for how to use Autopatcher the correct way, are there configuration-options, commandline, use of the 3 added separate tools (Hotfix Cleaner, Module Editor, Tweak Undo), what's are those files in the directory Program Files\AutoPatcher, can I safely delete them, can I undo Autopatcher changes, why are certain Microsoft-updates not default selected in Autopatcher (as a bad example, KB905474, Windows Genuine Advantage Notifications tool, for who want's this microsoft spy), what about this Full, Update and QMUP (Quick Monthly Update Packs) packs (in one small, not to be misunderstood story), how do I use the hash-codes to test if the packs are not corrupted, what is the correct timeline for Autopatcher (XP-installation, SP2 installation, AutoPatcher_XP_Apr2006_Full.exe, AutoPatcher_XP_May06_ENU_Update.exe, AutoPatcher_XP_Jun06_ENU_Update.exe), what about Bittorent-clients you can recommend to download the packs (I use BitComet which I can recomment), how to make a Full and following Update-pack compilation and maybe burn it on a CD for use on other to be updated windowspartitions or PC's, ea.

In short, why isn't there a helpfile included in the Autopatcher program, to be found on www.autopatcher.com or on the neowin forums. I read all the postings on the Official forum for AutoPatcher and yes, I got most of my questions answered but wouldn't it be much easier to have one central guide with most of these questions answered, especialy for newbies like me. Some of my questions (especialy those about how to use the packs) are asked repeatedly on this forum, it would save the good souls who answer them a lot of time, for instance to make Autopatcher even more better than it now is. Don't get me wrong, I like Autopatcher a lot.

P.S. Can someone tell me how to use the included tools Hotfix Cleaner, Module Editor, Tweak Undo?

best regards :)

  • 2 weeks later...

"no help" - I know how you feel.... serch the forum... I did A LOT of reading when I joined in... it's all there, just really spread around. In short to get answers to all your queestions, your going to need to do your homework.

"Hotfix Cleaner" - not sure | Module Editor - create your own mods | Tweak Undo - uninstall a tweak

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • WYSIWYG Web Builder 20.2.2 by Razvan Serea Web Buialder is a WYSIWYG (What-You-See-Is-What-You-Get) program used to create complete web sites. WYSIWYG means that the finished page will display exactly the way it was designed. The program generates HTML (HyperText Markup Language) tags while you point and click on desired functions; you can create a web page without learning HTML. Just drag and drop objects to the page position them "anywhere" you want and when youre finished publish it to your web server (using the build in Publish tool). Web Builder gives you full control over the content and layout of your web pages. One Web Builder project file can hold multiple web pages. Desktop publishing for the web, build web sites as easy as Drag & Drop "One Click Publishing" No FTP program needed. No special hosting required, use with any Hosting Service! Easily create forms using the built-in Form Wizard plus Form validation tools and built-in CAPTCHA. Advanced graphics tools like shapes, textart, rotation, shadows and many other image effects. Fully integrated jQuery UI (Accordion, Tabs etc), animations, effects and built-in ThemeRoller theme editor. Google compatible sitemap generator / PayPal eCommerce Tools Many navigation tools available: Navigation bars, tab menus, dropdown menus, sitetree, slidemenus. Built-in Slide Shows, Photo Galleries, Rollover images, Banners etc. Support for YouTube, Flash Video, Windows Media Player and many other video formats. Unique extension (add-on) system with already more than 250 extensions available! Create HTML5 / CSS3 websites today HTML5 document type (optimized HTML5 output). HTML5 audio/video and YouTube HTML5 support. HTML5 forms: native form validation, new input types and options, web storage. HTML5 canvas and svg support in shapes and other drawing tools. CSS3 @font-face. Use non web safe fonts in all modern browsers. CSS3 opacity, border radius, box shadow. CSS3 gradients. Add cool gradient effects using native CSS3 (no images). CSS3 navigation menu. Create awesome menus without using JavaScript or images. CSS3 animations and transitions. Including support for 2D and 3D transforms! Features for advanced users: Login Tools/Page Password Protection. Built-in Content Management System with many plug-ins (guestbook, faq, downloads, photo album etc). Add custom HTML code with the HTML tools. JavaScript Events: Show/hide objects (with animation), timers, move objects, change styles etc. Layers: Sticky layer, Docking layer, Floating layer, Modal layer, Anchored layer, Strechable layer and more! jQuery Theme Manager, create your own themes for the built-in jQuery UI widgets. Style Manager (global styling, H1, H2, H3 etc). Master Frames and Master Objects: reuse common element in your website. and much more! WYSIWYG Web Builder 20.2.2 changelog: Improved: Minor change in HTML formatting of the Overlay Menu. Fixed: Issue with aspect ratio of HTML Video. Download: WYSIWYG Web Builder 64-bit | 30.1 MB (Shareware) Download: WYSIWYG Web Builder 32-bit | 28.0 MB Screenshot: >> Click here << Link: Home Page | Templates | Free extras/addons | Changelog Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You are like that narcissistic moron and his name is Paul Thurrott.
    • WhatsApp document scanning gets closer to launch as more beta testers get access by Paul Hill Meta looks as though it’s getting closer to releasing WhatsApp’s native document scanner on Android because more people are now reporting they have access in the beta. This will give users a privacy-friendly way to snap photos of documents and automatically convert them to PDF ready for sharing. According to WABetaInfo, the feature comes with two modes: manual and automatic. The manual capture gives users more control over the process allowing them to adjust positioning and lighting to get the best quality scan. Automatic mode on the other hand automatically detects the edge of your document on its own and snaps the image without too much user input, making it faster and easier. Once the picture is taken, WhatsApp automatically converts it to a PDF file so that it can be shared and opened easily by the recipient. The file can be sent within private chats or group conversations. The entire scanning and conversion process takes place locally on your device, using Android’s built-in API for snapping documents. The document itself is also only stored locally until you decide to send it. Just like other WhatsApp messages, these scans are secured with end-to-end encryption when you send them to recipients. The only privacy risk is the user sending the PDF to the wrong person. The new feature was first noticed for Android a few weeks ago and with the latest beta it’s rolling out to more people. Once Meta has tested it across a wide array of devices, we will likely see it land for people on the stable version of WhatsApp. In recent weeks, we have also seen that Meta is testing new chat color themes in the beta releases. That feature doesn’t seem to have filtered down to the stable version yet, so be on the lookout for that too if that’s of interest to you.
  • Recent Achievements

    • Collaborator
      Mighty Pen went up a rank
      Collaborator
    • Week One Done
      emptyother earned a badge
      Week One Done
    • Week One Done
      DarkWun earned a badge
      Week One Done
    • Very Popular
      valkyr09 earned a badge
      Very Popular
    • Week One Done
      suprememobiles earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      568
    2. 2
      +FloatingFatMan
      188
    3. 3
      ATLien_0
      177
    4. 4
      Skyfrog
      111
    5. 5
      Xenon
      110
  • Tell a friend

    Love Neowin? Tell a friend!