Intel beats AMD with new CPU! Hell FrozeN?


Recommended Posts

huh? I've used nothing but AMDs on my personal computer for about 8-9 years now, and never had any problems with overheating... in fact, no problems at all. One the other hand, I knew plenty of people that had problems with Intel chips (not overheating, though), and that's why I stuck to AMD. I've always preferred them, and I'm not sure what you're talking about.

You've never heard of the Athlon series problems? Overheating and flakey chipsets, flakey motherboards, and really hot processors. AMD didn't implement the auto-shutdown feature back on the Athlons, so could literally melt down. Guess you got lucky....pre-1999 AMD was pretty horrible.

As long it doesn't heat up like a nuclear power station.

40% reduced power consumption

im quite impressed... but doesnt this chip come out in like Q4? what would amd have by then? 5000+ and higher... so the gap will deminish... although i havent seen any plans for amd to release a 3GHz cpu this year... 2.8GHz should be the limit for 2006.

AMD's next big jump is going to be to 65nm, which isn't due to happen till later this year. Conroe is expected late summer or fall. Also, the review was done with the 2.66 GHz Conroe vs a processor AMD can't even ship...Conroe is still expected in the 3+ GHz range. I don't think AMD has an entire architecture up their sleeve.

Anyone who's been around the game for awhile knew from the start...all the crap AMD has been pulling the past couple of years...they just woke a sleeping giant.

I don't think they've been pulling "crap", the K8 was one pretty well. Just look at the raw numbers out there...and then there's the integrated memory controller...hypertransport...

So if hell freezes now, 1969-1999 must have been pretty cold...

Edited by gwai lo
Come on :rolleyes: You're comparing tomorrow's technology to something that came out yesterday. Of course future chips from Intel are going to beat AMD's chips that were released last year! When AMD releases something comparable and Intel beats it, I'll give Intel the credit, but until then don't get to excited.
*cough* *cough* The AMD AM2 Actual test have shoved that with the RAM at 667MHz (RTM will be 800) is same or lower that the Sck 939 today counter parts... So I personally don't expect any hyper boost of performances in the nextgen AMD CPUs...

More over, AFAIK the Conroe will be cheaper than the A64x2 AM2 at same speed... (I can be wrong on this and anyway no final price as been told...)

11090.png

11091.png

11091.png

Final Words

While we're still comparing to Socket-939 and only using RD480, it does seem very unlikely that AMD would be able to make up this much of a deficit with Socket-AM2 and RD580. Especially looking at titles like F.E.A.R. where Conroe's performance advantage averages over 40%, it looks like Intel's confidence has been well placed.

Also keep in mind that we are over six months away from the actual launch of Conroe, performance can go up from where it is today. We also only looked at the 2.66GHz part, the Extreme Edition version of Conroe will most likely be clocked around 3.0GHz which will extend the performance advantage even further.

AMD still does have some time to surprise us with AM2, but from what we've seen today, they are going to have to do a lot of work to close this gap. We saw performance today in the two areas that we were most concerned about with Conroe: gaming and media encoding, and in both Intel greatly exceeded our expectations. Also remember that Conroe should be lower power than the AMD offering we compared it to, although we weren't able to measure power consumption at the wall in our brief time with the systems.

Going into IDF we expected to see a good showing from Conroe, but leaving IDF, well, now we just can't wait to have it.

More from the show as we get it...

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

if the price is the same i would love intel.. but nah. im gonna stay with AMD :D

don't want to not have money to eat for 1 month just because of a freaking cpu

http://www.theinquirer.net/?article=29504

It's not set in stone, but prices will probably be in that ballfield.

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

If it matters any...Conroe's TDP is 65w and the FX-60 is 110w at stock. AMD is going to have to pull off something amazing. In addition to process transition, we're supposed to see low power dual cores...but that's still quite a margin to make up.

Well, at least Intel is improving, good to hear. More competition is better so we get more with less. (Usually)

and better products

About time Intel woke up :)

who's saying they woke up ?

still dosent mean im gonna buy there crap lol

I agree - screw em.....and screw ATi - LET THE FLAMING BEGIN !!!!!!! :D

Very nice, this is going to heat up the cpu wars again.

bout time

because you can eally tell the difference between 350(AMD) and 532(INTEL)frames per second

Exactly - now a few people are going to look at this benchmark result and start talking smack all throughout Hardware Hangout Forums about how AMD soxorz, and intel pwns j00 !! and all that crap - because 1 CPU is 1/100000 of a millisecond faster....so if you ran your computer over a time longer than the age of the known universe - you would see a slight improvement

http://www.theinquirer.net/?article=29504

It's not set in stone, but prices will probably be in that ballfield.

If it matters any...Conroe's TDP is 65w and the FX-60 is 110w at stock. AMD is going to have to pull off something amazing. In addition to process transition, we're supposed to see low power dual cores...but that's still quite a margin to make up.

Have you read about the 35W TDP dual core X2?

Also, with the move to 65nm, most of the dual cores are now 55W TDP or something around there.

FX-60 is still 90nm..it's not fun to compare a 65nm chip that isn't out in the market to a 90nm that's actually beign sold.

And I wonder how Conroe will scale, with like 4 dual core processors on a board, that tiny fsb bus....STILL. -.-

Edited by aznx
*cough* *cough* The AMD AM2 Actual test have shoved that with the RAM at 667MHz (RTM will be 800) is same or lower that the Sck 939 today counter parts... So I personally don't expect any hyper boost of performances in the nextgen AMD CPUs...

More over, AFAIK the Conroe will be cheaper than the A64x2 AM2 at same speed... (I can be wrong on this and anyway no final price as been told...)

If I'm not mistaken Conroe is 65nm, so you won't be able to compare Intel Conroe until AMD comes out with a 65nm processor, which AM2 won't be. Now I won't argue that AMD is going to be behind Intel for a change, but that doesn't mean that the comparable processors won't beat Intel's processors.

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

Uh.....dont know what youve been smoking but there hasnt been a bit evidence stating a big performance gain with the new core.

DDR2 isnt a big gain over DDR, with the stratospheric clock settings, the RAM timings have to be loose as hell, thus much more latency - and I state again - we are talking about synthetic benchmarks which the regular user, even power user cant tell a bit of difference unless youre calculating for Pi or something and want to wait for 35,000,000 years to see a benefit. (and yes Im exaggerating)

Have you read about the 35W TDP dual core X2?

Also, with the move to 65nm, most of the dual cores are now 55W TDP or something around there.

FX-60 is still 90nm..it's not fun to compare a 65nm chip that isn't out in the market to a 90nm that's actually beign sold.

And I wonder how Conroe will scale, with like 4 dual core processors on a board, that tiny fsb bus....STILL. -.-

Well, people were comparing the new A64's to the old Pentium 4 northwoods. No one agreed with me when I said they were comparing different generations...however the Prescotts came out pretty horrible...but yes. We still can't compare the two companies directly. However, a 40% margin on paper looks pretty hard to make up..

The FX-60 was overclocked, so it's not even being sold. ;)

Yeah, a the Intel guys (the ones who work for Intel) over at [H] were talking about how the platform is the limiting factor now. The processors are set to take off, Intel has to work on a new platform to keep up with them now.

What's this NGMA thing? :|

Uh.....dont know what youve been smoking but there hasnt been a bit evidence stating a big performance gain with the new core.

DDR2 isnt a big gain over DDR, with the stratospheric clock settings, the RAM timings have to be loose as hell, thus much more latency - and I state again - we are talking about synthetic benchmarks which the regular user, even power user cant tell a bit of difference unless youre calculating for Pi or something and want to wait for 35,000,000 years to see a benefit. (and yes Im exaggerating)

plus performance even goes down for DDR2,

http://www.tomshardware.com/2006/02/21/a_l...form/page9.html

Good to hear Intel has regained control. For a while, it appeared Intel would fade into the night. Being a little bit of an Intel fan myself, it's good to see that Intel is number one in a benchmark. Of course, some people will think say AMD is better. Which, in some cases, is true. AMD is the underdog which people like to support, when they started getting better benchmarks, it even got more support.

AMD will still be hinderend no matter what people say, maybe not to the average user but for many top overclocks in the world, their IMC (Integrated Memory Controller) is often the cause of the infamous "cold-bug," many well known overclockers who visit XS are switching over, the cold-bug just hurts so much.

But if you think Conroe is impressive wait until you see the OC performance of Penryn which is a 45nm "Conroe"...

Well, people were comparing the new A64's to the old Pentium 4 northwoods. No one agreed with me when I said they were comparing different generations...however the Prescotts came out pretty horrible...but yes. We still can't compare the two companies directly. However, a 40% margin on paper looks pretty hard to make up..

The FX-60 was overclocked, so it's not even being sold. ;)

Yeah, a the Intel guys (the ones who work for Intel) over at [H] were talking about how the platform is the limiting factor now. The processors are set to take off, Intel has to work on a new platform to keep up with them now.

What's this NGMA thing? :|

Northwood and Prescott weren't really different generations, those were respins basically of Willamette, just like how you have Sledgehammer/Clawhammer, Venice/San Diego, etc. Those were all respins, not new CPUs as a whole.

FX-60 was o/c'd...so it's not even being sold? Wtf? Atleast you can buy the first part, the FX-60. Where the hell are you gonna find a Conroe at 2.66ghz? :rolleyes:

Intel's limiting factor is that crappy FSB.

NGMA? What?

Northwood and Prescott weren't really different generations, those were respins basically of Willamette, just like how you have Sledgehammer/Clawhammer, Venice/San Diego, etc. Those were all respins, not new CPUs as a whole.

FX-60 was o/c'd...so it's not even being sold? Wtf? Atleast you can buy the first part, the FX-60. Where the hell are you gonna find a Conroe at 2.66ghz? :rolleyes:

Intel's limiting factor is that crappy FSB.

NGMA? What?

uh...looking for a fight or something? :blink:

Whether you're an AMD or Intel fan, I think the fact that each of these companies keeps topping the each other's best is good news for all of us. We, the consumers, benefit from this close competition. Not only do we get the choice of newer, improved, and faster processors, but also the fact that the older(relative term :D ) models drop in price more quickly, making it even more affordable for all of us as well.

I like the fact that Intel scored on this one, just as I will be glad when AMD scores one above Intel in the next round, which I don't doubt at all. :yes:

One thing that we all can agree on after seeing the results of this tug-of-war is that competition is good. :cool:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • What would be the point wasting time, money and resource testing EOL operating systems?
    • expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      PsYcHoKiLLa
      262
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!