Intel beats AMD with new CPU! Hell FrozeN?


Recommended Posts

huh? I've used nothing but AMDs on my personal computer for about 8-9 years now, and never had any problems with overheating... in fact, no problems at all. One the other hand, I knew plenty of people that had problems with Intel chips (not overheating, though), and that's why I stuck to AMD. I've always preferred them, and I'm not sure what you're talking about.

You've never heard of the Athlon series problems? Overheating and flakey chipsets, flakey motherboards, and really hot processors. AMD didn't implement the auto-shutdown feature back on the Athlons, so could literally melt down. Guess you got lucky....pre-1999 AMD was pretty horrible.

As long it doesn't heat up like a nuclear power station.

40% reduced power consumption

im quite impressed... but doesnt this chip come out in like Q4? what would amd have by then? 5000+ and higher... so the gap will deminish... although i havent seen any plans for amd to release a 3GHz cpu this year... 2.8GHz should be the limit for 2006.

AMD's next big jump is going to be to 65nm, which isn't due to happen till later this year. Conroe is expected late summer or fall. Also, the review was done with the 2.66 GHz Conroe vs a processor AMD can't even ship...Conroe is still expected in the 3+ GHz range. I don't think AMD has an entire architecture up their sleeve.

Anyone who's been around the game for awhile knew from the start...all the crap AMD has been pulling the past couple of years...they just woke a sleeping giant.

I don't think they've been pulling "crap", the K8 was one pretty well. Just look at the raw numbers out there...and then there's the integrated memory controller...hypertransport...

So if hell freezes now, 1969-1999 must have been pretty cold...

Edited by gwai lo
Come on :rolleyes: You're comparing tomorrow's technology to something that came out yesterday. Of course future chips from Intel are going to beat AMD's chips that were released last year! When AMD releases something comparable and Intel beats it, I'll give Intel the credit, but until then don't get to excited.
*cough* *cough* The AMD AM2 Actual test have shoved that with the RAM at 667MHz (RTM will be 800) is same or lower that the Sck 939 today counter parts... So I personally don't expect any hyper boost of performances in the nextgen AMD CPUs...

More over, AFAIK the Conroe will be cheaper than the A64x2 AM2 at same speed... (I can be wrong on this and anyway no final price as been told...)

11090.png

11091.png

11091.png

Final Words

While we're still comparing to Socket-939 and only using RD480, it does seem very unlikely that AMD would be able to make up this much of a deficit with Socket-AM2 and RD580. Especially looking at titles like F.E.A.R. where Conroe's performance advantage averages over 40%, it looks like Intel's confidence has been well placed.

Also keep in mind that we are over six months away from the actual launch of Conroe, performance can go up from where it is today. We also only looked at the 2.66GHz part, the Extreme Edition version of Conroe will most likely be clocked around 3.0GHz which will extend the performance advantage even further.

AMD still does have some time to surprise us with AM2, but from what we've seen today, they are going to have to do a lot of work to close this gap. We saw performance today in the two areas that we were most concerned about with Conroe: gaming and media encoding, and in both Intel greatly exceeded our expectations. Also remember that Conroe should be lower power than the AMD offering we compared it to, although we weren't able to measure power consumption at the wall in our brief time with the systems.

Going into IDF we expected to see a good showing from Conroe, but leaving IDF, well, now we just can't wait to have it.

More from the show as we get it...

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

if the price is the same i would love intel.. but nah. im gonna stay with AMD :D

don't want to not have money to eat for 1 month just because of a freaking cpu

http://www.theinquirer.net/?article=29504

It's not set in stone, but prices will probably be in that ballfield.

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

If it matters any...Conroe's TDP is 65w and the FX-60 is 110w at stock. AMD is going to have to pull off something amazing. In addition to process transition, we're supposed to see low power dual cores...but that's still quite a margin to make up.

Well, at least Intel is improving, good to hear. More competition is better so we get more with less. (Usually)

and better products

About time Intel woke up :)

who's saying they woke up ?

still dosent mean im gonna buy there crap lol

I agree - screw em.....and screw ATi - LET THE FLAMING BEGIN !!!!!!! :D

Very nice, this is going to heat up the cpu wars again.

bout time

because you can eally tell the difference between 350(AMD) and 532(INTEL)frames per second

Exactly - now a few people are going to look at this benchmark result and start talking smack all throughout Hardware Hangout Forums about how AMD soxorz, and intel pwns j00 !! and all that crap - because 1 CPU is 1/100000 of a millisecond faster....so if you ran your computer over a time longer than the age of the known universe - you would see a slight improvement

http://www.theinquirer.net/?article=29504

It's not set in stone, but prices will probably be in that ballfield.

If it matters any...Conroe's TDP is 65w and the FX-60 is 110w at stock. AMD is going to have to pull off something amazing. In addition to process transition, we're supposed to see low power dual cores...but that's still quite a margin to make up.

Have you read about the 35W TDP dual core X2?

Also, with the move to 65nm, most of the dual cores are now 55W TDP or something around there.

FX-60 is still 90nm..it's not fun to compare a 65nm chip that isn't out in the market to a 90nm that's actually beign sold.

And I wonder how Conroe will scale, with like 4 dual core processors on a board, that tiny fsb bus....STILL. -.-

Edited by aznx
*cough* *cough* The AMD AM2 Actual test have shoved that with the RAM at 667MHz (RTM will be 800) is same or lower that the Sck 939 today counter parts... So I personally don't expect any hyper boost of performances in the nextgen AMD CPUs...

More over, AFAIK the Conroe will be cheaper than the A64x2 AM2 at same speed... (I can be wrong on this and anyway no final price as been told...)

If I'm not mistaken Conroe is 65nm, so you won't be able to compare Intel Conroe until AMD comes out with a 65nm processor, which AM2 won't be. Now I won't argue that AMD is going to be behind Intel for a change, but that doesn't mean that the comparable processors won't beat Intel's processors.

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

Uh.....dont know what youve been smoking but there hasnt been a bit evidence stating a big performance gain with the new core.

DDR2 isnt a big gain over DDR, with the stratospheric clock settings, the RAM timings have to be loose as hell, thus much more latency - and I state again - we are talking about synthetic benchmarks which the regular user, even power user cant tell a bit of difference unless youre calculating for Pi or something and want to wait for 35,000,000 years to see a benefit. (and yes Im exaggerating)

Have you read about the 35W TDP dual core X2?

Also, with the move to 65nm, most of the dual cores are now 55W TDP or something around there.

FX-60 is still 90nm..it's not fun to compare a 65nm chip that isn't out in the market to a 90nm that's actually beign sold.

And I wonder how Conroe will scale, with like 4 dual core processors on a board, that tiny fsb bus....STILL. -.-

Well, people were comparing the new A64's to the old Pentium 4 northwoods. No one agreed with me when I said they were comparing different generations...however the Prescotts came out pretty horrible...but yes. We still can't compare the two companies directly. However, a 40% margin on paper looks pretty hard to make up..

The FX-60 was overclocked, so it's not even being sold. ;)

Yeah, a the Intel guys (the ones who work for Intel) over at [H] were talking about how the platform is the limiting factor now. The processors are set to take off, Intel has to work on a new platform to keep up with them now.

What's this NGMA thing? :|

Uh.....dont know what youve been smoking but there hasnt been a bit evidence stating a big performance gain with the new core.

DDR2 isnt a big gain over DDR, with the stratospheric clock settings, the RAM timings have to be loose as hell, thus much more latency - and I state again - we are talking about synthetic benchmarks which the regular user, even power user cant tell a bit of difference unless youre calculating for Pi or something and want to wait for 35,000,000 years to see a benefit. (and yes Im exaggerating)

plus performance even goes down for DDR2,

http://www.tomshardware.com/2006/02/21/a_l...form/page9.html

Good to hear Intel has regained control. For a while, it appeared Intel would fade into the night. Being a little bit of an Intel fan myself, it's good to see that Intel is number one in a benchmark. Of course, some people will think say AMD is better. Which, in some cases, is true. AMD is the underdog which people like to support, when they started getting better benchmarks, it even got more support.

AMD will still be hinderend no matter what people say, maybe not to the average user but for many top overclocks in the world, their IMC (Integrated Memory Controller) is often the cause of the infamous "cold-bug," many well known overclockers who visit XS are switching over, the cold-bug just hurts so much.

But if you think Conroe is impressive wait until you see the OC performance of Penryn which is a 45nm "Conroe"...

Well, people were comparing the new A64's to the old Pentium 4 northwoods. No one agreed with me when I said they were comparing different generations...however the Prescotts came out pretty horrible...but yes. We still can't compare the two companies directly. However, a 40% margin on paper looks pretty hard to make up..

The FX-60 was overclocked, so it's not even being sold. ;)

Yeah, a the Intel guys (the ones who work for Intel) over at [H] were talking about how the platform is the limiting factor now. The processors are set to take off, Intel has to work on a new platform to keep up with them now.

What's this NGMA thing? :|

Northwood and Prescott weren't really different generations, those were respins basically of Willamette, just like how you have Sledgehammer/Clawhammer, Venice/San Diego, etc. Those were all respins, not new CPUs as a whole.

FX-60 was o/c'd...so it's not even being sold? Wtf? Atleast you can buy the first part, the FX-60. Where the hell are you gonna find a Conroe at 2.66ghz? :rolleyes:

Intel's limiting factor is that crappy FSB.

NGMA? What?

Northwood and Prescott weren't really different generations, those were respins basically of Willamette, just like how you have Sledgehammer/Clawhammer, Venice/San Diego, etc. Those were all respins, not new CPUs as a whole.

FX-60 was o/c'd...so it's not even being sold? Wtf? Atleast you can buy the first part, the FX-60. Where the hell are you gonna find a Conroe at 2.66ghz? :rolleyes:

Intel's limiting factor is that crappy FSB.

NGMA? What?

uh...looking for a fight or something? :blink:

Whether you're an AMD or Intel fan, I think the fact that each of these companies keeps topping the each other's best is good news for all of us. We, the consumers, benefit from this close competition. Not only do we get the choice of newer, improved, and faster processors, but also the fact that the older(relative term :D ) models drop in price more quickly, making it even more affordable for all of us as well.

I like the fact that Intel scored on this one, just as I will be glad when AMD scores one above Intel in the next round, which I don't doubt at all. :yes:

One thing that we all can agree on after seeing the results of this tug-of-war is that competition is good. :cool:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
    • Adobe Acrobat Reader Dis Continued
    • The name, you mean? If so, it's actually the objects common name. There's another one called NGC 7293 which is also known as Helix Nebula (because we're looking at a helix structure top down) but other times also known as the Eye of God. You'll understand when you see it
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      271
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      71
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!