Intel beats AMD with new CPU! Hell FrozeN?


Recommended Posts

huh? I've used nothing but AMDs on my personal computer for about 8-9 years now, and never had any problems with overheating... in fact, no problems at all. One the other hand, I knew plenty of people that had problems with Intel chips (not overheating, though), and that's why I stuck to AMD. I've always preferred them, and I'm not sure what you're talking about.

You've never heard of the Athlon series problems? Overheating and flakey chipsets, flakey motherboards, and really hot processors. AMD didn't implement the auto-shutdown feature back on the Athlons, so could literally melt down. Guess you got lucky....pre-1999 AMD was pretty horrible.

As long it doesn't heat up like a nuclear power station.

40% reduced power consumption

im quite impressed... but doesnt this chip come out in like Q4? what would amd have by then? 5000+ and higher... so the gap will deminish... although i havent seen any plans for amd to release a 3GHz cpu this year... 2.8GHz should be the limit for 2006.

AMD's next big jump is going to be to 65nm, which isn't due to happen till later this year. Conroe is expected late summer or fall. Also, the review was done with the 2.66 GHz Conroe vs a processor AMD can't even ship...Conroe is still expected in the 3+ GHz range. I don't think AMD has an entire architecture up their sleeve.

Anyone who's been around the game for awhile knew from the start...all the crap AMD has been pulling the past couple of years...they just woke a sleeping giant.

I don't think they've been pulling "crap", the K8 was one pretty well. Just look at the raw numbers out there...and then there's the integrated memory controller...hypertransport...

So if hell freezes now, 1969-1999 must have been pretty cold...

Edited by gwai lo
Come on :rolleyes: You're comparing tomorrow's technology to something that came out yesterday. Of course future chips from Intel are going to beat AMD's chips that were released last year! When AMD releases something comparable and Intel beats it, I'll give Intel the credit, but until then don't get to excited.
*cough* *cough* The AMD AM2 Actual test have shoved that with the RAM at 667MHz (RTM will be 800) is same or lower that the Sck 939 today counter parts... So I personally don't expect any hyper boost of performances in the nextgen AMD CPUs...

More over, AFAIK the Conroe will be cheaper than the A64x2 AM2 at same speed... (I can be wrong on this and anyway no final price as been told...)

11090.png

11091.png

11091.png

Final Words

While we're still comparing to Socket-939 and only using RD480, it does seem very unlikely that AMD would be able to make up this much of a deficit with Socket-AM2 and RD580. Especially looking at titles like F.E.A.R. where Conroe's performance advantage averages over 40%, it looks like Intel's confidence has been well placed.

Also keep in mind that we are over six months away from the actual launch of Conroe, performance can go up from where it is today. We also only looked at the 2.66GHz part, the Extreme Edition version of Conroe will most likely be clocked around 3.0GHz which will extend the performance advantage even further.

AMD still does have some time to surprise us with AM2, but from what we've seen today, they are going to have to do a lot of work to close this gap. We saw performance today in the two areas that we were most concerned about with Conroe: gaming and media encoding, and in both Intel greatly exceeded our expectations. Also remember that Conroe should be lower power than the AMD offering we compared it to, although we weren't able to measure power consumption at the wall in our brief time with the systems.

Going into IDF we expected to see a good showing from Conroe, but leaving IDF, well, now we just can't wait to have it.

More from the show as we get it...

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

if the price is the same i would love intel.. but nah. im gonna stay with AMD :D

don't want to not have money to eat for 1 month just because of a freaking cpu

http://www.theinquirer.net/?article=29504

It's not set in stone, but prices will probably be in that ballfield.

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

If it matters any...Conroe's TDP is 65w and the FX-60 is 110w at stock. AMD is going to have to pull off something amazing. In addition to process transition, we're supposed to see low power dual cores...but that's still quite a margin to make up.

Well, at least Intel is improving, good to hear. More competition is better so we get more with less. (Usually)

and better products

About time Intel woke up :)

who's saying they woke up ?

still dosent mean im gonna buy there crap lol

I agree - screw em.....and screw ATi - LET THE FLAMING BEGIN !!!!!!! :D

Very nice, this is going to heat up the cpu wars again.

bout time

because you can eally tell the difference between 350(AMD) and 532(INTEL)frames per second

Exactly - now a few people are going to look at this benchmark result and start talking smack all throughout Hardware Hangout Forums about how AMD soxorz, and intel pwns j00 !! and all that crap - because 1 CPU is 1/100000 of a millisecond faster....so if you ran your computer over a time longer than the age of the known universe - you would see a slight improvement

http://www.theinquirer.net/?article=29504

It's not set in stone, but prices will probably be in that ballfield.

If it matters any...Conroe's TDP is 65w and the FX-60 is 110w at stock. AMD is going to have to pull off something amazing. In addition to process transition, we're supposed to see low power dual cores...but that's still quite a margin to make up.

Have you read about the 35W TDP dual core X2?

Also, with the move to 65nm, most of the dual cores are now 55W TDP or something around there.

FX-60 is still 90nm..it's not fun to compare a 65nm chip that isn't out in the market to a 90nm that's actually beign sold.

And I wonder how Conroe will scale, with like 4 dual core processors on a board, that tiny fsb bus....STILL. -.-

Edited by aznx
*cough* *cough* The AMD AM2 Actual test have shoved that with the RAM at 667MHz (RTM will be 800) is same or lower that the Sck 939 today counter parts... So I personally don't expect any hyper boost of performances in the nextgen AMD CPUs...

More over, AFAIK the Conroe will be cheaper than the A64x2 AM2 at same speed... (I can be wrong on this and anyway no final price as been told...)

If I'm not mistaken Conroe is 65nm, so you won't be able to compare Intel Conroe until AMD comes out with a 65nm processor, which AM2 won't be. Now I won't argue that AMD is going to be behind Intel for a change, but that doesn't mean that the comparable processors won't beat Intel's processors.

Amd's up and coming cpu with DDR2 will likely smoke any comparable Intel offering. But it's great to see the competition and improvements.

Uh.....dont know what youve been smoking but there hasnt been a bit evidence stating a big performance gain with the new core.

DDR2 isnt a big gain over DDR, with the stratospheric clock settings, the RAM timings have to be loose as hell, thus much more latency - and I state again - we are talking about synthetic benchmarks which the regular user, even power user cant tell a bit of difference unless youre calculating for Pi or something and want to wait for 35,000,000 years to see a benefit. (and yes Im exaggerating)

Have you read about the 35W TDP dual core X2?

Also, with the move to 65nm, most of the dual cores are now 55W TDP or something around there.

FX-60 is still 90nm..it's not fun to compare a 65nm chip that isn't out in the market to a 90nm that's actually beign sold.

And I wonder how Conroe will scale, with like 4 dual core processors on a board, that tiny fsb bus....STILL. -.-

Well, people were comparing the new A64's to the old Pentium 4 northwoods. No one agreed with me when I said they were comparing different generations...however the Prescotts came out pretty horrible...but yes. We still can't compare the two companies directly. However, a 40% margin on paper looks pretty hard to make up..

The FX-60 was overclocked, so it's not even being sold. ;)

Yeah, a the Intel guys (the ones who work for Intel) over at [H] were talking about how the platform is the limiting factor now. The processors are set to take off, Intel has to work on a new platform to keep up with them now.

What's this NGMA thing? :|

Uh.....dont know what youve been smoking but there hasnt been a bit evidence stating a big performance gain with the new core.

DDR2 isnt a big gain over DDR, with the stratospheric clock settings, the RAM timings have to be loose as hell, thus much more latency - and I state again - we are talking about synthetic benchmarks which the regular user, even power user cant tell a bit of difference unless youre calculating for Pi or something and want to wait for 35,000,000 years to see a benefit. (and yes Im exaggerating)

plus performance even goes down for DDR2,

http://www.tomshardware.com/2006/02/21/a_l...form/page9.html

Good to hear Intel has regained control. For a while, it appeared Intel would fade into the night. Being a little bit of an Intel fan myself, it's good to see that Intel is number one in a benchmark. Of course, some people will think say AMD is better. Which, in some cases, is true. AMD is the underdog which people like to support, when they started getting better benchmarks, it even got more support.

AMD will still be hinderend no matter what people say, maybe not to the average user but for many top overclocks in the world, their IMC (Integrated Memory Controller) is often the cause of the infamous "cold-bug," many well known overclockers who visit XS are switching over, the cold-bug just hurts so much.

But if you think Conroe is impressive wait until you see the OC performance of Penryn which is a 45nm "Conroe"...

Well, people were comparing the new A64's to the old Pentium 4 northwoods. No one agreed with me when I said they were comparing different generations...however the Prescotts came out pretty horrible...but yes. We still can't compare the two companies directly. However, a 40% margin on paper looks pretty hard to make up..

The FX-60 was overclocked, so it's not even being sold. ;)

Yeah, a the Intel guys (the ones who work for Intel) over at [H] were talking about how the platform is the limiting factor now. The processors are set to take off, Intel has to work on a new platform to keep up with them now.

What's this NGMA thing? :|

Northwood and Prescott weren't really different generations, those were respins basically of Willamette, just like how you have Sledgehammer/Clawhammer, Venice/San Diego, etc. Those were all respins, not new CPUs as a whole.

FX-60 was o/c'd...so it's not even being sold? Wtf? Atleast you can buy the first part, the FX-60. Where the hell are you gonna find a Conroe at 2.66ghz? :rolleyes:

Intel's limiting factor is that crappy FSB.

NGMA? What?

Northwood and Prescott weren't really different generations, those were respins basically of Willamette, just like how you have Sledgehammer/Clawhammer, Venice/San Diego, etc. Those were all respins, not new CPUs as a whole.

FX-60 was o/c'd...so it's not even being sold? Wtf? Atleast you can buy the first part, the FX-60. Where the hell are you gonna find a Conroe at 2.66ghz? :rolleyes:

Intel's limiting factor is that crappy FSB.

NGMA? What?

uh...looking for a fight or something? :blink:

Whether you're an AMD or Intel fan, I think the fact that each of these companies keeps topping the each other's best is good news for all of us. We, the consumers, benefit from this close competition. Not only do we get the choice of newer, improved, and faster processors, but also the fact that the older(relative term :D ) models drop in price more quickly, making it even more affordable for all of us as well.

I like the fact that Intel scored on this one, just as I will be glad when AMD scores one above Intel in the next round, which I don't doubt at all. :yes:

One thing that we all can agree on after seeing the results of this tug-of-war is that competition is good. :cool:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • If possible change your subscription to a Microsoft 365 Personal Classic Account and no AI. And it is only $69.99 a year.
    • That's (at least partially) on 7-zip; Nanazip (7-zip fork) adds itself properly to Context menus.
    • We have disabled advertising in the forums for now for an undetermined period. If you feel like you get a lot of value out of the site please do whitelist ads on the news articles, and/or consider getting a subscription, we offer two tiers, one at: $14 per year (support the site for just over a dollar a month) or the $28/year tier (just over $2/month) that disables advertising and affiliate link tracking throughout the site (so also on the news side). We also have a 'Buy us a coffee' page if you just want to make a one-time donation. I am not mincing words when I say it is becoming harder and harder to monetize publications like Neowin, it's a fact of life that when we can no longer afford to pay for everything we'll go like many other sites already have. It doesn't have to cost you anything There are other ways to support Neowin too, like posting on topic content in the forums (technical support/questions/helping others) and sharing our news articles.. this costs nothing but your time and is just as important as subscribing or making a monetary donation! Anyway thanks for your time and continued support of Neowin. Now in our 26th year, and hopefully many more! For all the lurkers out there that whitelist us, make a free member account, and see fewer (only inline) ads on the news side  
    • BATorrent 3.0.2 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 3.0.2 changelog: Phone pairing & WebUI The browser WebUI was reskinned to match the desktop app — same dark palette, Inter font, flat surfaces, the real BATorrent logo (it was a random bat before), and a proper magnet icon. It now looks like the same product, not a separate dashboard. Pairing is one tap and zero typing: the generated WebUI password is now copyable, and the QR code carries the credentials — scanning it from your phone logs straight in (no typing the IP or password), then drops the credentials from the address bar. Search Two new providers: RuTor (CIS sources, no login, via a public TorAPI relay) and Torrents-CSV. Results are sorted by seeders (healthiest first), and each search now times out after 15 s so one dead provider can't hang the UI. Files & trackers Per-file priority is back: right-click a file in the detail panel to set Skip / Low / Normal / High. Rename an individual file inside a torrent (double-click or the file menu), separate from renaming the torrent. Remove a tracker from a torrent (the ✕ on a tracker row); adding was already there. Smart Paste on Ctrl+V — paste a magnet, a 40-char info-hash, or a .torrent URL straight from the clipboard and it's added immediately (text fields still paste text normally). Covers & titles Anime fansub naming ([Group] Title - NN) now resolves to the right show. Audio channel layouts in titles (DDP5.1, 7.1, …) are stripped so they don't pollute cover matching. Under the hood The legacy QWidget interface is gone. QML had been the only UI since 3.0.0 (reachable old code lived behind a hidden --legacy flag); with parity confirmed, the entire QWidget layer — main window, every dialog, the theme manager — was removed (~13,400 lines). The four restored actions above were features that backend already supported but the QML port had never wired. macOS: the WebUI password hash moved out of the keychain into app settings, so launching the app no longer pops a login-keychain password prompt on unsigned builds. The actual password still lives in the keychain. Cleanup: ~400 orphaned translation strings and a batch of dead code removed; internal duplication collapsed; an ARCHITECTURE.md added for contributors. Unit / security / memory tests and the ASan/UBSan/TSan sanitizers stay green. Download: BATorrent 3.0.2 | 30.5 MB (Open Source) Download: BATorrent Portable | 42.3 MB Links: BATorrent Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      477
    2. 2
      PsYcHoKiLLa
      262
    3. 3
      Skyfrog
      79
    4. 4
      ATLien_0
      60
    5. 5
      FloatingFatMan
      60
  • Tell a friend

    Love Neowin? Tell a friend!