Vista Build 5342 Released - Official Topic


Recommended Posts

Ya I see that it was added to my connected thing. Downloading it now! But i cant find a new key. Does it require a new key becuase in my connect thing I only have keys for 5308 and below.

Edited by jus1haz2

damn, i feel so frustrated right now...

i have a 1mbit connection, spent 8 hours downloading build 5308 because 5342 wasn't there yet. i go back to get the serial after the download completes, and there it is, built 5342...

i need to break somethin

I wish I could get this damn build to install! Had exactly the same problem with 5308... setup runs, reboots once, reboots twice, does it's thing for a couple of minutes, then I get a screen full of garbage. Nobody in the newsgroups seems to be able to help either :(

I wish I could get this damn build to install! Had exactly the same problem with 5308... setup runs, reboots once, reboots twice, does it's thing for a couple of minutes, then I get a screen full of garbage. Nobody in the newsgroups seems to be able to help either :(

What sort of setup do you have, laptop/desktop? x86, 64?? On board graphics, plenty of disk space? Are you running it from the cd, or starting it from Windows?

did you guys install the official nvidia vista drivers? http://www.nvidia.com/object/winvista_x86_87.15.html

I used these... apparently they give better performance:

v. 87.43 32Bit

v. 87.43 64bit

They are working well for me, on my 6800GT, although I can't go into standby - but this might be a sound driver issue.

Well, I got a problem intalling the build 5342 Release.

Everything works fine, until the first restart. I choose Vista on Bootmanager

and then the whole screen goes black and remains black.

I've tried several times, same effect.

I got a 3500+, 1GB RAM, 6800 GT

I chose a logical partition of my IDE drive instead of a primary. Could that be the Problem?

I appreciate your help :) .

Are Audigy 2 ZS drivers available for this release? Can they be installed natively or via XP SP2 mode?

As far as I know, you can launch CTZAPXX.exe or CTAPXX.exe (under safe mode) under audio\drivers\ on your Audigy installation CD. (assuming the directory structure is the same as the SBLive! disks)

Well, I got a problem intalling the build 5342 Release.

Everything works fine, until the first restart. I choose Vista on Bootmanager

and then the whole screen goes black and remains black.

I've tried several times, same effect.

I got a 3500+, 1GB RAM, 6800 GT

I chose a logical partition of my IDE drive instead of a primary. Could that be the Problem?

I appreciate your help :) .

Just wiat. It took me about 4min on this screen becuase im running it off of a really ****ty HDD :D the next build though is going on my raptor :D when does it come out?? ANyone know?

I've waited about 25 minutes now, and I don't think something is going to change.

Maybe I should try my S-ATA HDD? Do I need additional drivers? Cause I don't have a floppy drive :cool:

Damn it! I want it! :angry:

Edited by jaechester

Whatever i do, 5342 refuses to install on my x2 system. If i put in the dvd (32bit add 64bit, it dosnt matter) it would first just give me a black screen at boot. Then i tried to install it withn my windows xp, using daemon tools and then it would go ahead but later on give me an error. Then tried to boot the dvd again, and it did - instead of giving me the black screen. Then on the first reboot, it would simple give me a black screen on boot :s. Then tried to install again from withn xp using daemon tools, this time it would give me display after the first reboot, but what do you think happened on the second reboot? Just another ****ing black screen hanging :angry: :angry:

Vista 5342 just dont like my system :angry: - Not even in VMWare!

Oh... I tried on "multiple" drives, not just one... So i would be surprised if it was the drives to cause this.

Whatever i do, 5342 refuses to install on my x2 system. If i put in the dvd (32bit add 64bit, it dosnt matter) it would first just give me a black screen at boot. Then i tried to install it withn my windows xp, using daemon tools and then it would go ahead but later on give me an error. Then tried to boot the dvd again, and it did - instead of giving me the black screen. Then on the first reboot, it would simple give me a black screen on boot :s. Then tried to install again from withn xp using daemon tools, this time it would give me display after the first reboot, but what do you think happened on the second reboot? Just another ****ing black screen hanging :angry: :angry:

Vista 5342 just dont like my system :angry: - Not even in VMWare!

Oh... I tried on "multiple" drives, not just one... So i would be surprised if it was the drives to cause this.

I don't know if this helps, but Vista gives me a black screen on boot for a good 30 seconds before the real bootscreen kicks in, I heard it has to do with SATA drives, plus i'm on a not so modern computer. but It might help.

Just installed this build. It looks alright, compared to older builds, but the sound drivers don't install, and graphic performance is laggy. Even with my 7800 GT, dragging the window isn't that smooth, and some of the animations stutter. Oh well, at least glass and the animations work.

I didn't snap a screenshot of the system rating box, but according to the XML file WinSAT produced:

	<SystemScore>5</SystemScore>
	<MemoryScore>5</MemoryScore>
	<CpuScore>5.2</CpuScore>
	<CpuEncDecScore>5.2</CpuEncDecScore>
	<VideEncodeScore>5.3</VideEncodeScore>
	<GraphicsScore>5.9</GraphicsScore>
	<GamingScore>5.7</GamingScore>
	<DiskScore>5.7</DiskScore>

my system's rating is 5. :yes:

I don't know if this helps, but Vista gives me a black screen on boot for a good 30 seconds before the real bootscreen kicks in, I heard it has to do with SATA drives, plus i'm on a not so modern computer. but It might help.

The black screen just hangs, the longest time i waited was 20 mins- Before i turned it off.

I also tried to just unplug all my drives, i didnt need. Also tried to install on IDE drives.

Just installed this build. It looks alright, compared to older builds, but the sound drivers don't install, and graphic performance is laggy. Even with my 7800 GT, dragging the window isn't that smooth, and some of the animations stutter. Oh well, at least glass and the animations work.

I didn't snap a screenshot of the system rating box, but according to the XML file WinSAT produced:

	<SystemScore>5</SystemScore>
	<MemoryScore>5</MemoryScore>
	<CpuScore>5.2</CpuScore>
	<CpuEncDecScore>5.2</CpuEncDecScore>
	<VideEncodeScore>5.3</VideEncodeScore>
	<GraphicsScore>5.9</GraphicsScore>
	<GamingScore>5.7</GamingScore>
	<DiskScore>5.7</DiskScore>

my system's rating is 5. :yes:

Yeah right. I'll believe that when I see a screenshot.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I just looked on my computer and there are settings and log files for utilities I have never even turned on!
    • O&O ShutUp10 3.1.1104 by Razvan Serea O&O ShutUp10 offers a simple yet effective way to take control of your Windows privacy. It provides access to almost 50 privacy-related tweaks, most of them hidden or not easily accessible to the average computer users. Using a very simple interface, you decide how Windows 10/11 should respect your privacy by deciding which unwanted functions should be deactivated. Using ShutUp10 you can easily disable Windows Defender, turn off telemetry, disable peer-to-peer updates, turn off Wi-Fi Sense, disable automatic Windows updates, turn off and reset Cortana and more. ShutUp10 allows you to create a System Restore point before you apply any changes, so that you can revert your system at any time if you run into problems. O&O ShutUp10 is entirely free and does not have to be installed – it can be simply run directly and immediately on your PC. And it will not install or download retrospectively unwanted or unnecessary software, like so many other programs do these days! O&O ShutUp10 Free and Premium The latest version brings O&O ShutUp10 Premium, expanding the app’s long-standing privacy controls with automatic enforcement of user-defined settings. Instead of manually rechecking options after every Windows update, users can set their preferred privacy configuration once—or apply recommended settings in a single click—and the tool continuously monitors them in the background. If Windows 10 or 11 re-enables disabled features or introduces new data collection paths, Premium restores the chosen settings automatically without user intervention. The free version remains available and fully functional for manual adjustments, offering the same core privacy controls for Windows. However, the Premium tier is aimed at users who want long-term, hands-off protection, adding automatic reapplication after updates, ongoing monitoring, and optional notifications to ensure privacy settings remain consistent over time. O&O ShutUp10 3.1.1104 changelog: Added “Show Differences” button in the overview panel “Don’t show again” option for the restore point prompt Ctrl+F keyboard shortcut for search/filter functionality Detection and linking of system-wide and user-specific setting associations Automatic search while typing PREM: Option to preserve notification counters and timestamps across application restarts PREM: Reset blocked settings button in the Settings dialog PREM: Informational message when no settings are blocked PREM: Update check can also be triggered from the menu PREM: Notification deduplication and activity log summary feature Improved L005 “Disable Windows Location Service”: Version-specific split (up to Windows 11 23H2) and new variant for Windows 11 24H2+ L001 (Disable Location): Added Night Light warning to the description in all languages Search now detects setting IDs even when ID display is disabled and offers to enable it Detection and removal of Copilot/AI desktop apps in RecallTerminator Optimized High DPI support PREM: Reset button is now only enabled when blocked items exist – setting IDs are shown in the confirmation dialog PREM: Updated tray icons with higher-resolution versions PREM: Activity Log timestamps now use localized date and time formats PREM: Tray icon status now uses OK/Warning indicators and localized tooltips PREM: Recall folder detection switched to service-based detection PREM: Copilot uninstallation now provides UI feedback and improved verification Fixed Description text was not displayed correctly for the last item and disappeared when clicking the scrollbar Crash when clicking a search result heading or the […] button PREM: Installation path is now correctly preserved during upgrades PREM: Tray icon was not reliably removed when exiting the application PREM: Main window was not displayed correctly in single-instance mode PREM: Incorrect display of the & symbol in tray icon tooltips on Windows 10 PREM: Fixed notification flooding after sleep/standby PREM: Dashboard was not refreshed after applying recommended settings during onboarding PREM: Progress bar was not reset after deleting Recall folders PREM: Fixed service startup failures PREM: Fixed incorrect drift detection when Automatic Protection was disabled PREM: Notifications now correctly count all deviating settings when protection is enabled PREM: Registration Wizard was shown after sleep/standby despite a valid license Download: O&O ShutUp10 3.1.1104 | 76.4 MB (Freeware) Download: O&O ShutUp10 32-bit | ARM64 View: O&O ShutUp10 Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Fascinating...W h i t e P o w e r is now also asterisks out.  
    • In the past few days I have noticed two odd moderation activities. First, when I posted the term 'White Nationist Christian' it was asterisk's out. When I changed it to **** it was allowed! Second, in the Politics is a ###business thread I was allowed to post that the GOP is a party of p e d ophiles but I was censored  when I posted the GOP are a party of p e d ophile protectors. Wtf Neowin. Please explain.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      547
    2. 2
      +Edouard
      166
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Steven P.
      66
    5. 5
      neufuse
      65
  • Tell a friend

    Love Neowin? Tell a friend!