blakmajik Posted April 27, 2005 Share Posted April 27, 2005 oc'd my p4 3ghz to 3.6, was stable but my cooling sucks so i set it to 3.3 and its running great. 6600gt oc'd to 525/1050 :D Link to comment Share on other sites More sharing options...
blakmajik Posted April 28, 2005 Share Posted April 28, 2005 OC'd back to 3.6, i also added another case fan, cpu doesnt pass 61C at 100% load now and its at about 52C idle. Link to comment Share on other sites More sharing options...
moogoat Posted April 28, 2005 Share Posted April 28, 2005 geforce 4 Ti 4200 oc'd to 280/533 p4 2.4 ghz to 2.68 ghz (only stock fans for me :( ) Link to comment Share on other sites More sharing options...
adrianarrakis Posted April 29, 2005 Share Posted April 29, 2005 CPU-Z At 20% OC, CPU at 37 degrees celsius, 41 at heavy load, running perfect Next i will try 30% OC Link to comment Share on other sites More sharing options...
5tin@ Posted April 29, 2005 Share Posted April 29, 2005 Got my Athlon 2600 overclocked from 1.9ghz to 2.35ghz using four case fans.... two blowing in and two out. Takes it up to about an Athlon 3000 (bios recognises it as a 3000) Cpu temp idle = 36 Cpu temp full load = 42 Can't push it any higher, however it is running extremely stable!! Link to comment Share on other sites More sharing options...
Glassed Silver Posted April 29, 2005 Share Posted April 29, 2005 lol... my videocard runs @ 200MHz GPU/186MHz RAM (nVIDIA GeForce 2 MX 400 32MB RAM.... YEH I KNOW ITS CRAPPY :D but ill get nother one soon) rofl it runs fine, and tho its pretty old i gotta say its damn fast at all... -fm Link to comment Share on other sites More sharing options...
mikeboy Posted May 4, 2005 Share Posted May 4, 2005 AMD 64 3500+ "Venice" core at 2.75Ghz, runs like a charm, I can push it much higher, mayb 3.0 but I dont need that now, but someday... :D Link to comment Share on other sites More sharing options...
DannyGlass Posted May 6, 2005 Share Posted May 6, 2005 Doesnt matter if you need it, you still would overclock it to the max. -DannyGlass Link to comment Share on other sites More sharing options...
miniM3 Posted May 6, 2005 Share Posted May 6, 2005 I have my P4@2.26 FSB 533 overclocked at 2.4 and my ATi 9600 pro 128mb at 460 core and 317 the memory. Link to comment Share on other sites More sharing options...
kitsunedon Posted May 6, 2005 Share Posted May 6, 2005 ......dunno what else to say rather than what is in the signature. Link to comment Share on other sites More sharing options...
.weir Posted May 7, 2005 Share Posted May 7, 2005 http://valid.x86-secret.com/show_oc?id=16601 Waiting for the video card to come back from RMA so I can overclock that and put up an overall system overclock I made a registry key to display my cpu in the my computer properties . . . uAMD Tool says I have a 3600, and Sisoft Sandra says 3487, so I picked the number in the middle Link to comment Share on other sites More sharing options...
Jimbob7 Posted May 13, 2005 Share Posted May 13, 2005 Rig in sig. 2.8C good old M0 stepper, done 3.7G in the winter with a 900U, dropped to 3.5 when the heat came, back to 3.7 with DD water. Dothan coming soon, the 2.8 performes well. Link to comment Share on other sites More sharing options...
invalidbuffalo Posted May 15, 2005 Share Posted May 15, 2005 http://img244.echo.cx/img244/1322/joys4ad.jpg ^^^CPU i got my NV 6800GT to run at 440/1160 (it could probably do more) stabily... i want to try my cpu in a nForce 3 board because i might be able to get 2.8 out of it... Link to comment Share on other sites More sharing options...
Izlude Posted May 15, 2005 Share Posted May 15, 2005 I was messing with my AX4C MAX just right now. (PC4000 512 1 stick brand - quality rams) I had my P4 2.8C running at 215 for a long time. I tried 220 but it crashed. Then I read the aopen pcstat report and they said they put their mem to 2.8v so I did just that. I've got it to 225 and the ddr is set to 440. This is stock cooling, I believe I can push it as high as 230 with a new cooler :D Link to comment Share on other sites More sharing options...
bukowski Posted May 15, 2005 Share Posted May 15, 2005 I oc'd my p4 2.0ghz to 2.1ghz on STOCK COOLING :woot: Link to comment Share on other sites More sharing options...
.:MaYnArD:. Posted May 16, 2005 Share Posted May 16, 2005 Ill post SS later. Amd 64 3200 + Stock cooling. 2.0ghz -> 2.55ghz Runs at no higher than 39C during 3d mark 03. Didnt fiddle with memory timings becuase i think my memmory is bad for that twinsmos 3200 dual pack (i think, i might have 4gotten) When it was at 2.6 during 3d mark 03 i would get kinda wierd flashes, werent very noticeable, and its hard dto describe what it was, but it was like the image wasnt going away before the new image came though? Link to comment Share on other sites More sharing options...
Xylene Posted May 18, 2005 Share Posted May 18, 2005 My sig -- Athlon XP 2500+ DESKTOP | | \/ Link to comment Share on other sites More sharing options...
MagicMan Posted May 31, 2005 Share Posted May 31, 2005 AMD Athlon 64 3000 (Winchester) Stock is 1.8Ghz - overclocked to 2.5Ghz on stock cooling :-p Link to comment Share on other sites More sharing options...
Glynnvanheeswijk Posted June 2, 2005 Share Posted June 2, 2005 I have overclocked my sempron 2200+ (1.5Ghz) to 2.02Ghz a 500Mhz speed boost! And it runs at only 29C :yes: Link to comment Share on other sites More sharing options...
chris_h449 Posted June 5, 2005 Share Posted June 5, 2005 Pentium 133 -> 533 stock voltage and cooling sempron 2200+ 1.5ghz -> 1.8ghz 1.85v 200fsb Athlon xp-m 2400+ -> 2600mhz 13*200 1.9v runs at 49 after couple hours prime 95 on air! :D Nvidia MX4000 250/400 -> Ati Radeon 9800se 297/594 -> 350/680 Nvidia 6200 300/500-> 350/600 this is most of them as i can remember not brill but o/c neva the less :D Link to comment Share on other sites More sharing options...
grungeisdead Posted June 12, 2005 Share Posted June 12, 2005 blah venice 3000 @ 2835 1.45v Link to comment Share on other sites More sharing options...
ForeverUnknown Posted June 13, 2005 Share Posted June 13, 2005 (edited) I've gotten back into overclocking in the last few days. I'm back with: P4 3.0c @ 3.69 GHz w/ 246FSB, 1.6Vcore Corsair TwinX1024-3200LL @ 197MHz Cooled with Thermalright XP-120 and Panaflo 120mm medium speed, and I get 50C idle and 59C load. I just lapped my HSF and reapplyed AS5 today, so hopefully temps will drop once the paste breaks in a little. Currently Priming now for the break in. I think I'll get a Panaflo 120mm high speed and see how the temps do with that. It's pretty warm in my room though. AC isn't running and no fans in the room. I only have the window open. I need to get a themometer for my room to see how warm it is in here Edited June 13, 2005 by ForeverUnknown Link to comment Share on other sites More sharing options...
uniacid Posted June 13, 2005 Share Posted June 13, 2005 AMD 64 3700+ San Diego - 2.2Ghz @ 2.8Ghz http://valid.x86-secret.com/show_oc?id=22991 Link to comment Share on other sites More sharing options...
Daviesbad04 Posted June 17, 2005 Share Posted June 17, 2005 Nothing huge as Im just starting to get the hang of overclocking these A64 CPU's Link to comment Share on other sites More sharing options...
JasonC Posted June 19, 2005 Share Posted June 19, 2005 I've overclocked my X2 4800+ to 2.9Ghz, Water cooled too. Link to comment Share on other sites More sharing options...
Recommended Posts