Recommended Posts

Since I obviously have to prove I'm a beta tester, and that I'm running a legit copy, see the picture - I know it doesn't have my name... but I swear I am a beta tester.

Also, here's a screenshot of the final RTM's help file.

Look, I don't really know how I can prove that I'm a tester without giving out my personal information, but I SWEAR I AM A BETA TESTER. Some of you may have seen me in the newsgroups.

post-126842-1163987794_thumb.jpg

post-126842-1163987805_thumb.jpg

Bad news, guys. =/ You know how, when you purchased an upgrade version of XP, you could still do a clean install, and XP Setup would detect older versions of Windows, or you insert a disk and Windows would accept the older product and allow you to still do a clean install?

Was it really so, with a upgrade XP disk? I didn't know that. I am assuming the Upgrade XP CD still can't be used in a brand new HDD where no previous OS is installed?

Thats how I would have expected an upgrade version to act.....

Me too.

Andy13 said:

Since I obviously have to prove I'm a beta tester, and that I'm running a legit copy, see the picture - I know it doesn't have my name... but I swear I am a beta tester.

Also, here's a screenshot of the final RTM's help file.

Look, I don't really know how I can prove that I'm a tester without giving out my personal information, but I SWEAR I AM A BETA TESTER. Some of you may have seen me in the newsgroups. 

OK then. Bummer.

On the bright side, at least you have a free copy of Vista. :yes:

I disagree. The Vista Upgrade disc will be bootable. Look at the following page:

http://www.microsoft.com/windowsvista/getr...pgradeinfo.mspx

It says there in the Notes:

If you are currently using Windows 2000 Professional or Windows XP Professional x64, you are eligible for an upgrade copy to a corresponding or better edition of Windows Vista, but a clean install is required.

It specifically says that an upgrade copy is possible and with that upgrade dvd, you will have to perform a clean install. This already shows that the upgrade DVD will allow you to do a clean install, provided you have an eligible copy of a previous version of Windows.

I disagree. The Vista Upgrade disc will be bootable. Look at the following page:

http://www.microsoft.com/windowsvista/getr...pgradeinfo.mspx

It says there in the Notes:

If you are currently using Windows 2000 Professional or Windows XP Professional x64, you are eligible for an upgrade copy to a corresponding or better edition of Windows Vista, but a clean install is required.

It specifically says that an upgrade copy is possible and with that upgrade dvd, you will have to perform a clean install. This already shows that the upgrade DVD will allow you to do a clean install, provided you have an eligible copy of a previous version of Windows.

Then why does the Help say that, then?

Think MS just overlooked it...aha yet another result of rushing Vista???

There is one Vista DVD for every version, Corp, OEM, Upgrade and so on.. which version is installed is determined by the cd key you use.

I would imagine if you buy the upgrade version once you enter your vista cd key it will ask you to enter your xp cd key as well so it can check you actually own xp, that would make perfect sense to me.

I don?t believe for one minute that you won?t be able to boot of the CD if you buy the upgrade.

I would imagine if you buy the upgrade version once you enter your vista cd key it will ask you to enter your xp cd key as well so it can check you actually own xp, that would make perfect sense to me.

It's always puzzled my why they haven't ALWAYS done this, at least since XP anyway... Afterall, copies of the discs themselves are easy to come by, it's legitimate keys that are less easy to find.

Past upgrades, such as XP, would simply ask you to insert the previous versions disk, I believe and then proceed to do a clean XP install.

I don't remember where, but I read elsewhere you could do "exactly the same thing" with Windows Vista upgrade kit... I wasn't "reading" things...

Hmm... so on the one side MS says you can't do it and on the side that you can... looks like the left hand doesn't know what the right hand does :rofl:

Very unprofessional. I really hope that you actually can boot from an upgrade CD, otherwise they would drive a lot more people into piracy who don't want to bother with having to install XP first each time.

It doesnt make much sense to me. The point of upgrade versions is something more "License-wise" than installation wise. They sell you a cheaper version because it is assumed (and it will be checked) that you have a previous version of windows.

It would make more sense if this checked whether or not you have a LEGIT license of this previous windows version. I really don't think that microsoft would make a call like this out of their laziness of doing it the right way. But meh, what can you expect from then when the office 2000 upgrade check would take that SAME installation cd as a valid previous version!

Not to mention that people format their pcs from time to time, and they just won't install XP to install vista over it. And of course the upgrade DVD will be bootable, since you need to have access to the recovery tools anyway.

And, if it is not bootable, I'm sure you can still perform a clean install from within windows (either xp or vista).

So either way, this can't be right!!

I can explain this rather easily actually

Both sides are somewhat right and somewhat wrong.

The wording in the help file is somewhat poor.

Here's the easiest way to put it. With an upgrade only edition of XP you will not be able to perform a clean install from the boot process, which is why it says you cannot boot the upgrade disc to perform the install.

You have to start the install from inside of another copy of Windows

However you will not be able to upgrade Windows 2000 etc to Vista, you will only be able to start the install and a clean install while in the Win2k environment. It will then reboot and wipe 2k and install Vista as a fresh OS on your drive.

However with XP it will be able to detect and allow you to just upgrade the OS keeping your files and settings in place and secure.

The logic behind this is that Vista will be able to tell if your license has been set as a "Genuine" license via WGA. If it hasn't then Vista will not allow you to install the upgrade version which means pirates are crap out of luck here.

Fun eh?

OK... got it... I think... :blink: :wacko:

So long as you've got a full copy of XP (OEM or Retail), you'll be able to boot from the Vista "Upgrade" version, but not from "XP Upgrade" to "Vista Upgrade". Do we know if it's just based on media verification similar to XP? :ermm:

OK... got it... I think... :blink: :wacko:

So long as you've got a full copy of XP (OEM or Retail), you'll be able to boot from the Vista "Upgrade" version, but not from "XP Upgrade" to "Vista Upgrade". Do we know if it's just based on media verification similar to XP? :ermm:

Nope you still don't have it.

Any installs from an upgrade DVD will have to be started from inside of 2000 or XP.

With XP however you can choose to do an upgrade install which will leave all of your files and settings in place, or a clean install which will restart the PC and wipe everything and install Vista

With 2000, it will limit you to a clean install only which means you cannot do an upgrade so all of your files and settings will be lost.

I that is no good :( but one thing I don't understand, aren't all the Vista DVDs suppose to be the same? I always thought that all the DVDs were exactly the same and the only thing was that different amongst the different versions was the product key? and if that is the case...how could a different product stop a disk been bootable? it could stop you doing a clean install though...but maybe I'm completely wrong, as I haven't been following Vista that closely...

I guess that makes sense (only allowing an upgrade/clean install from within the operating system environment) BUT BUT BUT how would users handle it if their copy of Vista got corrupted? How would they "repair" from the DVD? How would they run the Startup Repair tool?

Something's just not right here.

On a side note: I HATE VISTA SO MUCH! God, sorry. I know that doesn't help my cause much, nor is it necessary, but... honestly. Vista is wrong on so many levels.

I guess that makes sense (only allowing an upgrade/clean install from within the operating system environment) BUT BUT BUT how would users handle it if their copy of Vista got corrupted? How would they "repair" from the DVD? How would they run the Startup Repair tool?

Something's just not right here.

On a side note: I HATE VISTA SO MUCH! God, sorry. I know that doesn't help my cause much, nor is it necessary, but... honestly. Vista is wrong on so many levels.

The repair tools come before the install so they are still accessible from the DVD.

Also to answer an earlier question yes all the DVD's are exactly the same so Xerxes what were are saying is that while the DVD is bootable you cannot just boot from the DVD and install Vista, do you see the difference?

If you use a full retail copy DVD it simply will not allow an upgrade install from a DVD boot, it's disabled there as well.

The repair tools come before the install so they are still accessible from the DVD.

Also to answer an earlier question yes all the DVD's are exactly the same so Xerxes what were are saying is that while the DVD is bootable you cannot just boot from the DVD and install Vista, do you see the difference?

If you use a full retail copy DVD it simply will not allow an upgrade install from a DVD boot, it's disabled there as well.

Fair enough, thx for the info :) seems rather strange way of doing it though, so an upgrade can't do a fresh install like the XP upgrade could (when you prove you own a copy of the previous OS your upgrading from) and the full install can't upgrade...seems rather odd considering that RC1 could do a clean install or upgrade...guess MS want to make it clear that the Upgrade version is only for upgrading and the Full is only for a clean install I guess.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This is why competition must exist. Finally, pressure is mounting on Microsoft to move in the right direction.
    • Microsoft is making Windows 11's context menus faster, simpler, and configurable by Taras Buria Five years ago, Windows 11 introduced redesigned context menus, offering users a simpler, more modern design. However, customers quickly discovered that the new menus leave a lot to be desired. Many are unhappy with performance (they are really slow), while others dislike the double-layed design, where many options are hidden behind the "Show more options" button. In addition, over the years, menus became cluttered and overloaded. While Microsoft has already fixed plenty of pain points across Windows 11, context menus remain mostly unchanged. Fortunately, Microsoft is finally listening. Marcus Ash, Design and Research Lead for Windows at Microsoft, responded to a tweet on X, confirming that the company is working on fixing Windows 11's context menus. Reworked context menus are supposed to be faster, simpler by default, and "configurable to what you use most." What the latter means is unknown, just like whether Microsoft plans to keep the classic menu alongside the modern one, but according to Marcus, the wait should finally be over soon, as he promised to "share our approach soon." Improved context menus will most likely appear first in Windows 11 preview builds in the Experimental Channel. While we wait for Microsoft to release them, you can try fixing context menus on your PC with a simple tool called Windows 11 Context Menu Manager. It lets you disable entries you do not need, not only cleaning up context menus, but also making them significantly faster. Microsoft has already improved Windows 11's Start menu and taskbar, so hopefully it will address user criticism of the context menu as well. Stay tuned for new Windows 11 preview builds, which usually arrive every Friday.
    • If the drive/memory is soldered to the board, which it probably is, then it's a no from me
    • Driver Genius 25.0.0.143 by Razvan Serea Driver Genius is a professional driver management tool features both driver management and hardware diagnostics. Driver Genius provides such practical functions as driver backup, restoration, update and removal for computer users. If you often reinstall your operating system, you may not forget such painful experiences of searching all around for all kinds of drivers. If unfortunately you have lost your driver CD, the search will be more troublesome and time-consuming. Driver Genius can automatically find drivers for a device when the system can't find a driver for it. It can recognize the name and vendor's information of the device, and directly provide download URL for the required driver. Driver Genius also supports online updates for drivers of existing hardware devices. Driver Genius customers can obtain information for latest drivers by Driver Genius's LiveUpdate program, which can synchronize to the database on Driver Genius site. Features at a glance: Find the latest drivers for your computer. One click to update all drivers silently. Automatically install driver updates silently. Make your drivers are always up to date. New rollback driver design for safer driver update. Free to backup all drivers now! Package all drivers to an executable auto installer. One click to restore all drivers. Remove invalid or useless drivers/devices, improve system performance and stability. New system information tool. Detailed hardware inventory. Hardware temperature monitor. Protect your CPU, GPU and HDD. New system transfer assistant. Upgrade/degrade your windows system easily. New SSD Speeder. Improve your disk performance and reliability. New System booster provides over 90 optimization options that make your computer run faster and smoother. New System Cleanup can help you to clean up the temporary files and cache files or other junk files in system. Driver Genius 25.0.0.143 changelog: Enhanced detection for Windows Runtime components. Update the hardware detection component to support more new hardware. Update the compression component to address security issues. Download: Driver Genius 25.0.0.143 | 20.7 MB (Shareware) View: Driver Genius Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • We do it all the time on our IT Service desk mailbox to add a reference, in the subject line, once it's been logged and then it's filed into the appropriate sub-folder. Other companies probably do the same thing.
  • Recent Achievements

    • One Month Later
      Carru_123 earned a badge
      One Month Later
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      PsYcHoKiLLa
      250
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      67
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!