Vista slow at copying files


Recommended Posts

[ Smart Ass comment of the Day ] I think either we have to wait till the Retail release of the product or we have to wait till the Service Pack 1 or we all have to shift to a Mac or Linux or Stick to Windows XP [ /Smart Ass comment of the Day ]

Very very slow copying from DVD Disc to Hard Disc. And I have installed all the right Intel drivers as recommended by intel.

I'm going to bet that installing those Intel drivers was your mistake. The Microsoft-provided IDE/ATAPI drivers always work better...

Remember, Vista tends to eat 300+Mb, where I've seen an average of 400+ of RAM at idle. You only have 512... that could be problem 1. Problem 2, HD near full/not defraged. Problem 3, Older Mobos sometimes cause all the winOS's to set the controler to PIO mode, make sure its set to UDMA. If i had a vista machine handy I'd give you step-by-step. Last problem, Check Intel's site for a chipset update. Microsofts Controler drivers tend to run "compatibility" Which you dont always get great performance out of, if you used intels they not be vista tested yet. Although I've rare to never had problems with intel's chipset drivers it could be you downloaded it before they completed the "vista" drivers.

I too have a similar problem, but more with networked Pc's on my Lan than between partitions.

I use sendto 1.6 for transfering files between hard drives and directories on Vista.

works great.

http://www.trogsoft.com/downloads/files/sendto16.exe

My main problem is with transferring files across my Lan from Vista, I now have to resort to pulling them off Vista from my other computers.

Concerning speed with moving files across LAN's; I found that my files moved slowly too while I had routers in place that didn't support IPV6. I've since switched the routers out for new ones that do support IPV6, but before I switched them I found that disabling IPv6 using the below reg entry solved the problem:

Windows Registry Editor Version 5.00

; Disable IPv6 over all interfaces and prefer IPv4 to IPv6
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters]
"DisabledComponents"=dword:000000ff

Also see http://www.microsoft.com/technet/community...guy/cg1005.mspx for information concerning IPV6 and the above reg key.

Concerning speed with moving files across LAN's; I found that my files moved slowly too while I had routers in place that didn't support IPV6. I've since switched the routers out for new ones that do support IPV6, but before I switched them I found that disabling IPv6 using the below reg entry solved the problem:

Windows Registry Editor Version 5.00

; Disable IPv6 over all interfaces and prefer IPv4 to IPv6
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters]
"DisabledComponents"=dword:000000ff

Also see http://www.microsoft.com/technet/community...guy/cg1005.mspx for information concerning IPV6 and the above reg key.

Didn't fix for me - my processor goes to 100% on network transfers >from< my PC (I can get a file without any problem).

It has been like this since RC2: if I must transfer a large file, I "just" burn a DVD or log on XP.

yeah i have noticed that transferring files from 1 HD to another takes SOOOOOOO LONG#$R3

my system is

amd x2 4800+

2 gigs of corsair ram (2 sticks 1 gig each)

2 hard drives, main - hitachi 160 sata II hard drive... 2nd is 120gb drive..

nvidia 7800gtx

when i first installed vista i tried transferring files from my 120 gig to my 160, i was transferring like 50 gigs of music and it took about 2 hours...

than when i transferred my music back from my main hd to my secondary... it toook SOOOO loong about a hour n a half :angry:

theres no possible way its my hardware because on win xp i know that the max time it would take to copy that stuff would probably be like 20 minutes

i have no clue why its going so slow... but it sucks :no: :(

i have the same problems

copying files from partition to network folders or other partitions just take ages.... :s

I pointed it like 4 months ago, nobody cared. I wonder what Beta testers were doing...taking screenshots i guess and uploading to rapidshare... :no:

Same problem here - seems bad with either lots of small files, or a few big files, it doesn't seem to be hardware limited, because if I copy files from one vista pc to another vista pc via a gigabit network cable - neither hd's activity light is consistantly on (on less than 50%of the time) - the cpu usage on either pc isn't 100%, the network isn't saturated - I don't know what else to try. The maximum speed is about 5 Mbytes per sec.

If I have time, I might try writing my own copy program to work over the network, without using smb shares (using tcp and my own app-layer protocol instead), and see what transfer rate I get - that should eliminate the possibility of a hardware limitation or a driver problem, while also highlighting the speed the microsoft copy should be aiming for.

Hey guys and gals,

I "Think" I solved the answer to the slow copying. I came across this while trying to uninstall the MS SQL sync program. This may work for you I have noticed a HUGE increase on the web and on my network with this. I use Ultimate btw.

Start >> Control Panel >> Programs and Features

Click on " Turn windows features on or off" on the left side of the panel

Takes a sec to load all the features

Uncheck "Remote Differential Compression"

I also unchecked "Print Services" (Since I don't have a printer)

Click "Ok" and you will be all set.

I then copied a 700 movie from one drive to another and it took less then 10 secs.

-+>Aaron

Let me know if it works for you.

Edited by NewB4Ever
  • 3 weeks later...
Hey guys and gals,

I "Think" I solved the answer to the slow copying. I came across this while trying to uninstall the MS SQL sync program. This may work for you I have noticed a HUGE increase on the web and on my network with this. I use Ultimate btw.

Start >> Control Panel >> Programs and Features

Click on " Turn windows features on or off" on the left side of the panel

Takes a sec to load all the features

Uncheck "Remote Differential Compression"

I also unchecked "Print Services" (Since I don't have a printer)

Click "Ok" and you will be all set.

I then copied a 700 movie from one drive to another and it took less then 10 secs.

-+>Aaron

Let me know if it works for you.

This did not work for me...Using the Vista RTM from MSDN

Hopefully this issue gets resolved soon as I don't really feel like going back to XP...but these slow network transfers are pretty much unbearable

I think you guys have some settings wrong... my PC is no slower than XP... not at all. Copying files is something I do reguarly and I wouldn't be using Vista if it was slower than XP.

care to share with the rest of us what settings you changed or you are just lucky by default?

I don't think many of us went tinkering with things that made our transfers slower...

Hey guys and gals,

I "Think" I solved the answer to the slow copying. I came across this while trying to uninstall the MS SQL sync program. This may work for you I have noticed a HUGE increase on the web and on my network with this. I use Ultimate btw.

Start >> Control Panel >> Programs and Features

Click on " Turn windows features on or off" on the left side of the panel

Takes a sec to load all the features

Uncheck "Remote Differential Compression"

I also unchecked "Print Services" (Since I don't have a printer)

Click "Ok" and you will be all set.

I then copied a 700 movie from one drive to another and it took less then 10 secs.

-+>Aaron

Let me know if it works for you.

That worked for me, I am on RC2, what is remote differetial compression anyway?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • With how far Tim Apple's head has been up Trump's ass, there's no way this was done reluctantly.
    • Like the article stated, it's written completely from scratch, unlike the umpteen Chromium clones. It got its start as the browser built-in to the also written-from-scratch SerenityOS.
    • Hello, From looking at the screen shots in your motherboard's manual at https://endownload.colorful.cn/EnDownload/MotherBroard/2022/Intel 600/Manual/Intel 600 Series BIOS English/Intel 600 Series BIOS User Guide.pdf, you go to the ADVANCED option at the top of the BIOS (UEFI) menu, then select SECURITY in the list of options on the left.  From there  you can enable and set the Secure Boot mode. Regards, Aryeh Goretsky  
    • Final Fantasy VII Remake Part 3 is getting a simultaneous release across PC and all consoles by Pulasthi Ariyasinghe Square Enix showed up to the Summer Game Fest presentation today with multiple trailers showing off its next chapter in the Final Fantasy VII Remake saga. The final chapter of this trilogy now has an official name too, with it being dubbed Final Fantasy VII Revelation, following up Final Fantasy VII Remake and Final Fantasy VII Rebirth from recent years. Vincent Valentine, Cid, Cloud, Barret, Tifa, and more showed up in the trailers as they battle against enemies, or 'Weapons,' from the final chapter. "As the world teeters on the brink of annihilation, the final battle against Sephiroth begins," says the trailer description. "A meteor mars the sky, monstrous planetary guardians wreak havoc across the globe, and the fires of war rage. Now, Cloud and his companions must stand against this chaos to not only decide the planet's fate, but bring a legendary conflict to its conclusion." Following the reveal trailer, the show also dropped some gameplay footage that shows off a new way to travel across the open world using the Highwind airship. Players will be able to swap characters on during battles, use tactical mode to synchronize with allies, and summon their entities. Cid Highwind and Vincent Valentine are joining the party this time too. “FINAL FANTASY VII, first released in 1997, has been beloved by fans for many years and has since become a “legend” in its own right," added producer Yoshinori Kitase. "The FINAL FANTASY VII Remake Series that began in 2020 with everyone’s passionate support is finally reaching its climactic finale with FINAL FANTASY VII REVELATION. The story’s final destination represents my emotions spanning thirty years working on this title" One of the biggest revelations of this announcement, however, was the multiplatform release confirmation from the get-go. Square Enix will be releasing Final Fantasy VII Revelation across PC, Xbox Series X|S, Nintendo Switch 2, and PlayStation 5 in Spring 2027 without any timed exclusivity programs.
    • Hello, Having a simple utility to allow Microsoft's customers to configure the context menu, with a few options like showing the current menu, showing a proposed menu/alternate configurations, loading and saving the settings, and a "reset to default" option would have solved this. Let Microsoft provide a recommended default look-and-feel, maybe a couple alternative configurations, like a basic/simplified version of that, and a more advanced version for that, and that would have been very well-received, I think. Microsoft could even had offered a library of different configurations, similar to what they have done in the past for Windows Media Player skins, Themes, and desktop wallpaper. Regards, Aryeh Goretsky
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      269
    3. 3
      Skyfrog
      78
    4. 4
      Steven P.
      68
    5. 5
      +Edouard
      61
  • Tell a friend

    Love Neowin? Tell a friend!