[Cancelled] Sarah Connor Chronicles (Terminator Series)


Recommended Posts

Reese was the last name of the John Connor's father, who came from the future, and considers future John Connor his closest friend.

Yea I know but John and Sarah were using it for their last name because they were on the run from the law.

btw, in the 1st ep the terminator teacher ask for Reese and start shooting to John. But clearly in the 1st movie (yea, that one when the actual governor wasnt that popular) the machines didnt know the name of the father, just Sarah and her son.
huh? Reese was an alias that they were using to hide.
Reese was the last name of the John Connor's father, who came from the future, and considers future John Connor his closest friend.
Yea I know but John and Sarah were using it for their last name because they were on the run from the law.

Doli is correct. It is the alias they were using for their last name. They are on the run from the law, and any Terminators that may come after them. They cannot go around calling themselves John and Sarah Conner. Each time they move, they pick up a new identity, which was basically key to the plot of the 2nd episode.

whats the point of the series then?

What's the point of Smallville? It doesn't always follow the same continuity either, but it's still A GREAT show nonetheless.

The only thing that bothers me about the show is Acting & action(Where on Smallville it's Awesome), if that gets better, I can LOVE this show!

Edited by JediXAngel
Yea I know but John and Sarah were using it for their last name because they were on the run from the law.

My point was that Reese wasn't simply an alias, it was the last name of John's father, which gives it a greater connection than just another name. That is just one of many continuity errors, but meh. I got the impression that they still used the name Reese before they left again to the small town where they were eventually attacked.

Doli is correct. It is the alias they were using for their last name. They are on the run from the law, and any Terminators that may come after them. They cannot go around calling themselves John and Sarah Conner. Each time they move, they pick up a new identity, which was basically key to the plot of the 2nd episode.

Read above.

You don't make any sense.. why would recycling Reeses name be a continuity error? I doubt the terminator tracked them down by the last name, after all FBI seemed to be fairly close too.

Using the name Reese wasn't the error, the Terminator knowing Kyle Reese (who's been dead since 1984) was the father was the error that ThePitt pointed out.

Using the name Reese wasn't the error, the Terminator knowing Kyle Reese (who's been dead since 1984) was the father was the error that ThePitt pointed out.

The Terminator that was shooting at John didnt know that Kyle Reese was the father. Maybe the terminator found them because they didnt get new IDs after Sarah left her boyfriend. He gave the FBI her name as Sarah Reese which goes into the system as another alias that they are using and thats how both Terminators found John. The Terminator that is helping John and Sarah said it took her over 70 days to find them and ask why she didnt get new fake IDs.

edit: from WikiPedia

Charley gives Agent Ellison Sarah's new alias, Sarah Reese, which is entered into her database file. A new terminator, who has been monitoring the FBI's database, is now informed of her new name, and begins his search.

Pilot episode can be downloaded for free from Amazon Unbox Video download. (I wonder if its on Joost?)

http://www.amazon.com/gp/product/B0012HEB32/ref=imdbpov_dv_0

Edited by Doli

By the far the most ridiculous thing in this TV show so far was the headless terminator riding a motorcycle to pick it's head up. Does it have extended wi-fi and imaging sensors in it's body too? That model must cost more than PS3... coincidently the source of skynet in later episodes. :D

At the very least, I enjoy this show more than T3: Rise of the Machines.

Wasn't terrible. But a lot of the crap could be done without.

"I got you a tight present"

No one gives a crap. Go kill stuff.

That's easy for you to say because that's what you think. Remember, not everyone will dislike the things you dislike. That includes all 18 million people who watched the first episode, and the 10.07 million who watched the second episode. :p

That's easy for you to say because that's what you think. Remember, not everyone will dislike the things you dislike. That includes all 18 million people who watched the first episode, and the 10.07 million who watched the second episode. :p

Its the 24 timeslot. People want killing.

That's easy for you to say because that's what you think. Remember, not everyone will dislike the things you dislike. That includes all 18 million people who watched the first episode, and the 10.07 million who watched the second episode. :p

I bet that was halfed again last night, it just seems that as theres no 24 noone cares.

I just watched this weeks, it wasn't bad just wasn't good the more I see Summer Glau tho the more I like her :p

I feel exactly the same way.

The show isn't BAD, its just an average show.

Maybe now that the terminator is back in business with a new skin, we'll get some more action.

I set my DVR to record last night's episodes and it seemed entirely too short, I was having to fast forward every 5-7 minutes through 4-5 minutes of commercials... seemed it was only about 35 minutes of actual TV show in the 1hr time slot... if I had watched it live I'd probably have switched channels and forgotten about it.

I set my DVR to record last night's episodes and it seemed entirely too short, I was having to fast forward every 5-7 minutes through 4-5 minutes of commercials... seemed it was only about 35 minutes of actual TV show in the 1hr time slot... if I had watched it live I'd probably have switched channels and forgotten about it.

It's almost 43 minutes on the dot, including the intro

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • PotPlayer 260622 by Razvan Serea PotPlayer is an extremely light-weight multimedia player for Windows. It feels like the KMPlayer, but is in active development. Supports almost every available video formats out there. PotPlayer contains internal codecs and there is no need to install codecs manually. Other key features include WebCam/Analog/Digital TV devices support, gapless video playback, DXVA, live broadcasting. Distinctive features of the player is a high quality playback, support for all modern video and audio formats and a built DXVA video codecs. A wide range of subtitles are supported and you are also able to capture audio, video, and screenshots. A comprehensive video and audio player, that also supports TV channels, subtitles and skins. Its been described on the Internet as The KMPlayer redux, and it pretty much is. Daum PotPlayer 260622 (1.7.22963) changelog: Removed Kakao TV Added pause function when navigating via the navigation bar Significantly improved internal stability Fixed an issue where colors appeared strange during RGB24 processing Improved playback for some HTTP streams Improved sync processing for the built-in audio renderer Fixed an issue where certain MP4 files behaved abnormally during playback Download: Daum PotPlayer (64-bit) | 54.7 MB (Freeware) Download: Daum PotPlayer (32-bit) | 61.1 MB View: Daum PotPlayer Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.44 is out.
    • Speccy 1.34.084 by Razvan Serea Speccy will give you detailed statistics on every piece of hardware in your computer. Including CPU, Motherboard, RAM, Graphics Cards, Hard Disks, Optical Drives, Audio support. Additionally Speccy adds the temperatures of your different components, so you can easily see if there's a problem! Processor brand and model Hard drive size and speed Amount of memory (RAM) Graphics card Operating system At first glance, Speccy may seem like an application for system administrators and power users. It certainly is, but Speccy can also help normal users, in everyday computing life. If you need to add more memory to your system, for example, you can check how many memory slots your computer has and what memory's already installed. Then you can go out and buy the right type of memory to add on or replace what you've already got. Download: Speccy 1.34.084 | 20.5 MB (Freeware) View: Speccy Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • ImgDrive 2.2.7 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.7 changelog: Added command line parameter to set number of drives Added AACS-Auth support for HD DVD Bumped kernel driver version to 2.2.7 Download: ImgDrive 2.2.7 | 692 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 535 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • AnyDesk 9.7.7 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.7 fixes: Fixed an issue that prevented users from creating meetings without an active license Download: AnyDesk 9.7.7 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      524
    2. 2
      +Edouard
      199
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      82
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!