Vista SP1 Beta 1 Released July 16th?


Recommended Posts

What makes you think they've done that? Microsoft DO employ more than one or two programmers you know...

The XP SP3 team are NOT the same programmers as the Vista SP1 team.

Support for XP ended earlier this year............where have you been?

Found this article this morning related to Vista SP1:

Vista SP1 will fix critical ReadyBoost performance bug

Published July 9th, 2007 by Long Zheng

More details of the second coming surfaced yesterday when Mary Jo reported a few tips she had received about the upcoming Windows Vista Service Pack 1 beta to be released later this month, including a very basic list of functionality and performance improvements. However a day prior, a Microsoft employee silently outlined a critical flaw in Windows Vista’s ReadyBoost feature and mentioned SP1 would include the fix - a rare occasion under the new Gorbachev Sinofsky administration.

Robert Hensing, a security engineer at Microsoft, wrote on his blog (update: since been removed, Blake Handler has some quotes) about a performance flaw in ReadyBoost which severely hindered the responsiveness after resuming from standby (S3) or hibernate (S4) due to an architectural bug. The problem causes irregular and unnecessary hard-disk thrashing after resume which can take up to 8 minutes to settle down - ironically the outcome is the exact opposite of ReadyBoost’s purpose to increase responsiveness by caching. The cause is a simple yet stupid oversight in the design of ReadyBoost’s security system which encrypts all cache-data with an AES-128 encryption key, a great idea badly implemented.

Continued at source.

Source: istartedsomething

If this is true then maybe SP1 will be more than just a roll up of security patches - which is a good thing. :)

Found this article this morning related to Vista SP1:

Vista SP1 will fix critical ReadyBoost performance bug

Published July 9th, 2007 by Long Zheng

More details of the second coming surfaced yesterday when Mary Jo reported a few tips she had received about the upcoming Windows Vista Service Pack 1 beta to be released later this month, including a very basic list of functionality and performance improvements. However a day prior, a Microsoft employee silently outlined a critical flaw in Windows Vista?s ReadyBoost feature and mentioned SP1 would include the fix - a rare occasion under the new Gorbachev Sinofsky administration.

Robert Hensing, a security engineer at Microsoft, wrote on his blog (update: since been removed, Blake Handler has some quotes) about a performance flaw in ReadyBoost which severely hindered the responsiveness after resuming from standby (S3) or hibernate (S4) due to an architectural bug. The problem causes irregular and unnecessary hard-disk thrashing after resume which can take up to 8 minutes to settle down - ironically the outcome is the exact opposite of ReadyBoost?s purpose to increase responsiveness by caching. The cause is a simple yet stupid oversight in the design of ReadyBoost?s security system which encrypts all cache-data with an AES-128 encryption key, a great idea badly implemenContinued at source.e.

Source: istartedsomething

If this is true then maybe SP1 will be more than just a roll up of security patches - which is a good t:)ng. :)

Hmm i don't trust the way that article was wri:huh: :huh:

Hmm i don't trust the way that article was written :huh:

Well if you follow the links, you can see the original post by the Microsoft guy ... seems pretty real to me, but who knows, anyone can make stuff up on the Internet these days. I guess we will just have to wait until something official comes from Microsoft.

The slow copy problem has not been fixed.... the slow network copy has been partially fixed, but the copying to anywhere else or even to another folder is still quite slow.

slow in 32 bit maybe. ive run both 32 and 64 bit and 32 is rediculously slow. but 64bit seems faster than than xp.

im running 64bit atm and no probs with it here. my 64bit vista is stable as and gaming wise no problems either (good ol ati :p )i dont really care when the pack comes out because im running sweet.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BATorrent 3.0.2 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 3.0.2 changelog: Phone pairing & WebUI The browser WebUI was reskinned to match the desktop app — same dark palette, Inter font, flat surfaces, the real BATorrent logo (it was a random bat before), and a proper magnet icon. It now looks like the same product, not a separate dashboard. Pairing is one tap and zero typing: the generated WebUI password is now copyable, and the QR code carries the credentials — scanning it from your phone logs straight in (no typing the IP or password), then drops the credentials from the address bar. Search Two new providers: RuTor (CIS sources, no login, via a public TorAPI relay) and Torrents-CSV. Results are sorted by seeders (healthiest first), and each search now times out after 15 s so one dead provider can't hang the UI. Files & trackers Per-file priority is back: right-click a file in the detail panel to set Skip / Low / Normal / High. Rename an individual file inside a torrent (double-click or the file menu), separate from renaming the torrent. Remove a tracker from a torrent (the ✕ on a tracker row); adding was already there. Smart Paste on Ctrl+V — paste a magnet, a 40-char info-hash, or a .torrent URL straight from the clipboard and it's added immediately (text fields still paste text normally). Covers & titles Anime fansub naming ([Group] Title - NN) now resolves to the right show. Audio channel layouts in titles (DDP5.1, 7.1, …) are stripped so they don't pollute cover matching. Under the hood The legacy QWidget interface is gone. QML had been the only UI since 3.0.0 (reachable old code lived behind a hidden --legacy flag); with parity confirmed, the entire QWidget layer — main window, every dialog, the theme manager — was removed (~13,400 lines). The four restored actions above were features that backend already supported but the QML port had never wired. macOS: the WebUI password hash moved out of the keychain into app settings, so launching the app no longer pops a login-keychain password prompt on unsigned builds. The actual password still lives in the keychain. Cleanup: ~400 orphaned translation strings and a batch of dead code removed; internal duplication collapsed; an ARCHITECTURE.md added for contributors. Unit / security / memory tests and the ASan/UBSan/TSan sanitizers stay green. Download: BATorrent 3.0.2 | 30.5 MB (Open Source) Download: BATorrent Portable | 42.3 MB Links: BATorrent Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • How about a global switch to turn the awful things off instead of a registry hack? Then everyone wins.
    • This doesn't strike me as so shocking when... " IT admins do have some control over this rollout. If they choose to opt out, devices in their tenant won't automatically get the dreaded Copilot app"
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      468
    2. 2
      PsYcHoKiLLa
      257
    3. 3
      Skyfrog
      79
    4. 4
      ATLien_0
      60
    5. 5
      FloatingFatMan
      60
  • Tell a friend

    Love Neowin? Tell a friend!