Halo 03 |News & General| OFFICIAL


Recommended Posts

^ Exactly. It's a very good length on a respectable difficulty level (read: Heroic or higher) as many reviewers have also stated. It doesn't really make sense to go play it on Easy or even Normal and then say it's too short... come on now. :rolleyes:

I beat it on Heroic in about five hours my first run through. Don't try to pretend it isn't a short game.

Legendary extends it a little bit, but it's still fairly often that battles can be completely skipped- enemies are confined to small zones and won't leave to chase you.

The game is short. Don't make excuses up for it. That said, its replayability is infinite.

well after playing halo 3 since the 28th im gonna be trading that game in asap not even worth having in my house anymore almost all the people i know is trading the game in anywho im not dissing the game i just can not get into the game at all

Punctuation for the win!

I beat it on Heroic in about five hours my first run through. Don't try to pretend it isn't a short game.

Legendary extends it a little bit, but it's still fairly often that battles can be completely skipped- enemies are confined to small zones and won't leave to chase you.

The game is short. Don't make excuses up for it. That said, its replayability is infinite.

It's funny you should say that because I got into an argument with a clerk at my local Gamestop who was wearing a "NOOBS PLAY PS3" shirt at the Halo 3 launch (not for nothing, but if you're a clerk at a videogame store, don't wear shirts like that). Anyway, he asked "what good games are there for the PS3?". I said Heavenly Sword (which I like immensely). His rebuttal was "did it take you 6 hours to finish it? LOL". Funny that people can finish Halo 3 in less time.

And for the record, I haven't finished HS yet because I'm really trying to enjoy the game. However, rag's right, the replay value in Halo 3 kicks ass. I actually bought another 360 just so I can play in my computer room while my wife watches TV (moving the 360 is a pain, and this way I can play co-op/multiplayer with the kids).

Any story could feel like it doesn't close. Even when I saw Return of the Jedi it felt like that PART of Star Wars was closed, but look at all the books and comics put out since then. I wouldn't put the game down because of that, it's a silly argument.

I beat it on Heroic in about five hours my first run through. Don't try to pretend it isn't a short game.

Legendary extends it a little bit, but it's still fairly often that battles can be completely skipped- enemies are confined to small zones and won't leave to chase you.

The game is short. Don't make excuses up for it. That said, its replayability is infinite.

You finished Legendary by yourself in 5 hours. :| King of halo?

Heroic myself took me 10 hours. Now I'm working my way up with Legendary with several skulls.

Well, just went to load up my game on Floodgates load up is extremely slow and it gets to 30% and then jumps back to 0%, Back to main menu I go to resume campaign option and it sits there loading for 3 minutes only to come up with Failed to Load. So I go back to a previous mission and it loads up and I play from there... as soon as I get to the next mission (floodgate) I get a Disk Read Error. The disk has a few small scratches on it, which were not there when I got it. The game had loaded up Floodgates fine the other day. :angry:

Times like this I really despise the xbox and it really feels like a shoddy piece of hardware. These kinds of problems shouldn't happen. especially with such a huge game, it's extremely disappointing.

I beat it on Heroic in about five hours my first run through. Don't try to pretend it isn't a short game.

Legendary extends it a little bit, but it's still fairly often that battles can be completely skipped- enemies are confined to small zones and won't leave to chase you.

The game is short. Don't make excuses up for it. That said, its replayability is infinite.

You can't call a game short if you're skipping all the battles.

-Spenser

I'm chiming in that the AI is questionable, at best, especially when driving. At least twice now, I'd had the AI drive the warthog into a wall and keep trying to go forward while a wraith takes us out. Out of the warthog? I can't count how many times the damn AI characters jump in front of my shots and then give me the usual "same team" complaint.

just cause you don't know them munky man, don't mean they don't exist.

sound familiar? ;) :)

Haha just a bit. But in this case at least we kinda know ragn4rokk 2.0 in some ways :p

If he can prove it, I'll eat my words :)

Halo 3 most popular on Live

by Rob Purchese

Halo 3 is already the most popular game on 360, according to the amount of unique users playing the game while connected to Live.

The list of our current favourites was published on Larry "Major Nelson" Hryb's blog - the director of programming for Xbox Live - and saw Bungie's latest overtake previous champ Gears of War to claim the top spot.

Further down titles like Rainbow Six Vegas continued to perform well, as did the Call of Duty 4 beta and, subsequently, previous instalment Call of Duty 3.

The Pro Evolution Soccer 2008 demo also made the list, joining BioShock, Forza 2, Madden NFL 08 and Guitar Hero II to round out the top ten.

Elsewhere Sonic 2 proved to be the most popular Live Arcade title of recent times, while Halo 2 retained its long-standing seat on the Xbox throne.

Source: EG

Halo 3 smashes UK 360 Record

by Rob Purchese

Halo 3 has become the second fastest selling game in UK chart history, according to Chart-Track, with one in three Xbox 360 owners in the UK buying the Microsoft-published title.

With the UK Xbox 360 installed base at 1.4 millon in the UK, estimates suggest that the Bungie-developed game shifted more than 466,000 copies in the UK alone in its first four days on sale. That figure is dwarfed only by Grand Theft Auto: San Andreas, which shifted an incredible 677,000 copies in two days when it was released on PS2 back in October 2004 - but, then again, the PS2 installed base in the UK at the time was some 6.4 million according to Chart-Track.

Advertisement

Needless to say, then, that Halo 3 topped the all formats chart for the week ending 29th September. But it was also a strong week for new releases across the board.

Despite Halo 3 fever sweeping the nation, EA still managed to enjoy its best-ever opening weekend for a FIFA release with FIFA 08 charting in second place. All told, Halo 3 and FIFA 08 accounted for some 83 per cent of all 360 software sales last week. Meanwhile, last week's one and two - Tiger Woods 08 and MySims - dropped down to third and fourth.

Juiced 2: Hot Import Nights rather unpredictably outsold the far superior SEGA Rally by landing two places ahead in fifth - we blame the television advert with the boobs - while new EA IP Skate just missed out on the top ten by entering at 11th.

Activision, though, failed to break into the best sellers with Enemy Territory: Quake Wars, which was only able to manage 16th - although Transformers managed to hold onto ninth.

The rest of the top ten was padded out with familiar Nintendo names: More Brain Training, Super Paper Mario and Wii Play.

Ratatouille also failed to impact, sniffing around in 39th, but then the Pixar film on which it is based has yet to be released here.

Overall, Halo 3 managed to double the total 360 sales for the week, which prompted Forza Motorsport 2 to surge forwards 22 places, from 35 to 13.

Source: EG

My ass you did :rofl:

There is far better Halo players here than you and I doubt any of them took less than 10 hours.

I beat the game in around 10 hours on Legendary in Co-op. Solo Heroic in about the same time. Haven't gotten to Solo Legendary yet. I have all the skulls and have accessed all the terminals. My campaign goals are Solo Legendary and beating every level in the meta game scoring mode.

I'm a RPG fan so 10hours is not long to me but there is a lot of replay in the game, going back getting the skulls and terminals I found fun. Playing it on normal with friends that did not want to play any harder was actually a lot of fun, it was amazing to see how much different it is from Heroic Solo and Legendary Co-op.

On Easy or even Normal I'm sure I could rush the game and probably beat it in 4hours. But this is skipping a lot of the battles witch is really part of the game. I'm sure 5hours on heroic is possible, it would be very hard though rushing in there at that difficulty.

Gamefly Charts: Halo 3 Stays On Top, Orange Box Makes Strong Debut

This week's top rental charts from U.S. game rental company GameFly, representing the most requested games for the week ending October 1st, highlight both to-be-released and already released games in a unique demand-specific chart.

Halo 3 maintains the top spot in the overall charts for the third straight week, while just over a week ahead of its highly anticipated release, the Half Life 2 compilation The Orange Box comes into the second spot, displacing EA's Skate all the way down to the fifth position. This week marks Call of Duty 4: Modern Warfare's third week in the third spot, and Project Gotham Racing 4 enters the top five in the fourth position.

What follows is a breakdown of the top titles requested by GameFly subscribers across each of the major platforms:

Xbox 360

1. Halo 3 (Microsoft), 2. Half Life 2: The Orange Box (EA) 3. Call of Duty 4: Modern Warfare (Activision), 4. Project Gotham Racing 4 (Microsoft), 5. Skate (EA)

For the third straight week, the top five all-platform requests are identical to the top five Xbox 360 requests, reflecting the same movement and demonstrating a telling dominance for the console in the rental market.

<snip>

Source - Gamasutra

That last bit has less to do with Halo and more to do with the huge lineup of awesome 360 games, but who'd have thunk Halo 3 would be on top :p

-Spenser

Hell Halo might be a short game in some people's eyes, I don't dispute that. Doing it in 5 hours on heroic though? I doubt that a lot. The very fact that the jackals in the game can kill you within 2 shots throws it out the window imo. That doesn't even take into account brutes and the flood which eat a lot of time up.

Like I said, if he can proove it, go for it :p

You guys are proving my point.

I'm working my way through Legendary right now, and I'm finding it far more difficult. Still, I've only played six or seven hours and I only have two missions left (4 and 5, which aren't exactly the longest). That said, on this playthrough I've been doing some missions with one other person co-op and some by myself. So that might have cut down some time. Still, me and brother wandered around plenty on those co-op missions, so that's some extension right there.

And I'm actually very good at Halo's campaign. I've played Halo 1 very often over the past five years. I've beaten the game on Legendary literally dozens and dozens of times. Halo 3 I've already gone through four times, I believe. Halo 2 I only finished once, for anyone interested.

Skulls + Heroic helps to toughen things up a bit, but it's still not a huge difference (unless you turn on Tilt with Famine, ogod!). Either way, it's not the difficulty we're arguing about- it's length. And the game is still short, any way you slice it.

Here's some more info for you nonbelievers: when I'm exploring, each level might take me upwards of two hours. But through normal play (not on Normal, mind), the game is fairly short. That's not a bad thing, though. Don't know what you guys are getting all tied up about.

Bioshock took me 30 hours. Metroid Prime 3 recently took me a little over 10. For some people, the times for those games were reversed. You see? Not everyone gets through games at the same pace. They're not like movies, with a set running time.

A little aside: I was just telling my brother you guys didn't believe how quickly I finished the game. He started laughing about how if we were doing co-op we probably could've finished in three hours. That's a little exaggeration on his part, but that's a remark coming from someone whose new favorite game is H3. The length doesn't matter, guys. It's the quality.

edit:

Here's a link for u doodz.

A half an hour on Heroic, with almost all the skulls turned on. Co-op, granted, but still.

Edited by ragn4rokk 2.0

Hell if you did do it, I'm impressed. I certainly couldn't do it. Maybe If I replayed Halo 1 and 2 like you have I may be betetr at it. Really thoguh I just don't have the time to devote just to Halo.

Now your bro is saying 3 hours? Oh jeez, you really are pushing it :p

Dang, you must be amazing. I'm not bad, but it takes me a little bit to beat a level on Heroic because I'm more strategic because I hate dying -- even if not dying means I take longer. Want to play co-op Legendary the week of Thanksgiving to get me that achievement? :laugh:

Yeah Ayepecks, I'm all for that offer :)

The ironic thing is, I'm not all that great at multiplayer. On Halo 1 I was great- but then, so was anyone with a decent skill with the pistol. But now I think my K/D ratio is hovering around .75 :/

I'm better at objective games, but my Halo 3 slayer skills could use some work.

I haven't played online multiplayer yet... still have to see how good I am. I can dominate my roommate and a few other people on the track team at the university I'm at at it, but that's offline, and I don't know how good they all really are.

He did die 27 times, or 9 times... either way, 36 times total.

I haven't played online multiplayer yet... still have to see how good I am. I can dominate my roommate and a few other people on the track team at the university I'm at at it, but that's offline, and I don't know how good they all really are.

Why not give online multiplayer a go yet? It's really the only way to get better.

Damn, either I am just rubbish on at this game or most others are amazing. Everyone seems to be marching through this game on Heroic and Legendary, I am going through on Normal, fairly simple but I still die alot. Though as much as I love games I am not a hardcore gamer, I just don't have the patience or concentration to play through on such high difficulties.

I might give it ago... but ehh....

EDIT:

Also is there a way to rewind in the save movies?? It seems like a basic feature which doesn't seem to be there.

Edited by freedom77
TeamXbox guide to the IWHBYD Skull. :happy:

1191054152.jpg

your reward... :p

Apparently you only need the last 7 notes so you don't need to do that much jumping

http://www.halo3planet.com/halo-3-skull-lo...s/iwhbyd-skull/

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!