Recommended Posts

There is a very simple solution to stop the gate glitch in the beginning: Make players invincible to the other team's weapons for that short period of time. Seriously, why haven't they done that?

I will agree with Ayepecks about the Pryo. I sometimes have huge problems with the Backburner, where I'll be torching someone from the back, and no crits come out.

Sure, I'll admit it's full of whiners and fanboys. But the frequency of posts about how underpowered the Pyro was before the update says something. It was even mentioned in articles about the game on gaming sites.

The pyro was very underpowered during the initial beta but was buffed shortly after launch - after that it wasn't considered an underpowered class (not beyond the occasional moan / topc). There were still the occasional moan but the Pyro Achievements update didn't really affect balance (other than the +50hp with the backburner, though that was removed in a subsequent update). I hang around the Steam forums a lot... at least the complaints about the soldier being overpowered have stopped.

All I was saying is that it makes perfect sense that ppl will whine about a class that is more difficult to play. So to me at least, it seems pointless to point to "tons" of forum posts. =p

Also, yah, I don't have a lot of hours as pyro (20hrs) the times I did play it though, well, it's pretty easy to top the score board, so it baffles me to think that ppl think it's underpowered. Most pyro's charge blindly hoping for the kill, thus most pyro's are easy to take out by most other classes. Unless of course, they actually flank/flee/shoot at a distance, etc. when necessary...

Edit:

I said nothing in regards to points. Pyro deserves points just like all classes, but it makes sense that most of its points will be coming from assits, and not single kills. Isn't that the reason there are assist points? =P Again, pretty easy to top scoreboard... Secondly, It's not the MOST difficult class, and it's not difficult for the sake of being difficult, it just has a bit of a learning curve, because its a bit different from what you would do in your average shooter, hell the genre of game in general is suppose to be very direct. The pyro however, is clearly not a directly offensive class (In general).

One thing that I think would be cool to add to the new environment is map interaction. Take, for instance, weather would be cool. Wind and rain could definitely effect real life battle and as such would be a neat thing to try and overcome or adapt to in the game. Could you imagine a teammate getting struck by lighting or someone you're about to snipe get blown away by a strong gust of wind. Certainly would be cool IMO as long as it is totally random and can effect both teams.

ive been thinking sort of about a new spy unlock for his upgrade, and i thought of this...

Instead of the spy having a pistol, we turn him into a total sneak/stab machine. You remove his pistal, and instead, you get 3rd person view. This way you can look around corners and over things easier to be able to tell when to go invis and disguise. Something that isnt overpowered or impracticle.

What I fancy for the demo-man is proximity stickies :D no remote detonation they stay alive till you die, but if anyone goes near them *KABLOOOOIIIEE* :D

While that would be a sweet idea (as a fellow demoman) i can help but think that demomen would just clog up choke points with them, payload stage 3 point one comes to mind...

One thing that I think would be cool to add to the new environment is map interaction. Take, for instance, weather would be cool. Wind and rain could definitely effect real life battle and as such would be a neat thing to try and overcome or adapt to in the game. Could you imagine a teammate getting struck by lighting or someone you're about to snipe get blown away by a strong gust of wind. Certainly would be cool IMO as long as it is totally random and can effect both teams.

I'd really like a implementation of wind, one that affected physics props (like when you first get off the train in HL2) and "jiggle bone" objects on normal props.

And maybe a way to have client side ragdolls that can be anchored in place and still collide with players (for those playing at home, plants that collide with you and don't lag)

What I fancy for the demo-man is proximity stickies :D no remote detonation they stay alive till you die, but if anyone goes near them *KABLOOOOIIIEE* :D

If that is the case, to balance it, they should be able to be detonated by other explosives or by the pyros' air blast.

I think I saw news about CSS, CS1.6 and TF2 tournament coming soon, today on Steam. Anyone with link with more info?

The message.

Some good suggestions up there. About the demoman: what about a replacement gun that, instead of charging up to determine how far sticky grenades shoot, it just increases a bomb's blast radius when charging up (at the cost of some ammo)? To keep that balanced, borrowing D!ABOL!C's suggestion they should explode on any contact with any projectiles, making it possible for an enemy to turn a demoman's boosted bomb on himself.

Edited by rm20010
2fort and Goldrush are my favorites

Plus one.

I also play Gravel Pit occasionally. Other than that, I haven't touched the other maps.

Going into a long stalemate in 2fort is an effective time killer. :p

This topic is now closed to further replies.
  • Posts

    • My father still uses a programme written in dbase3. Still manages to work with a little help from dosbox. 
    • Microsoft hides these secret Windows 11 performance boost settings available on every PC by Sayan Sen Windows enthusiasts often look for ways to extract as much performance out of their systems as possible, and it's often the case that they try and do so while trying to minimize the heat and power consumption. This is especially relevant in the case of mobile Windows PCs since laptops and notebooks tend to get hot and management of that heat and power is harder in such a form factor. As such users often turn to techniques like under-volting which can be used to squeeze out the maximum capabilities of a chip while also maintaining lowered power levels. There are official apps from AMD and Intel with the likes of Ryzen Master and XTU (Extreme Tuning Utility). While these are quite handy, most enthusiasts probably prefer to dig into the BIOS and play around with settings there like Curve Optimizer on Ryzen, which lets users set various frequency-voltage scaling values. These are essentially called P-States. If you are not familiar with them, Processor Power Management is done through Advanced Configuration and Power Interface (ACPI) P-states and C-states. While P-states or performance pwoer states handle CPU voltage-frequency scaling, C-states deal with CPU sleep states so that some of the CPU functions, which are not necessary at that moment, can be disabled. The P-states and C-states work together to make the processor run more efficiently. It helps the OS and apps determine which cores can be parked and which should be boosted. Of course not every user is an enthusiast or knows the technicalities and integrities of how things like overclocking or undervolting work. Thankfully for them Windows itself offers something pretty cool, though it is hidden by default on all systems. By default, Windows only has two P-States, "Minimum Processor State" and "Maximum Processor State." However, this can be changed with a Registry trick to expand the options under a secret "Processor performance boost mode" dropdown. This essentially enables the HWP or hardware P-States available on a device, and these are not controlled just by the OS itself as the underlying hardware gets involved too. In total there are five Processor Performance Boost Mode profiles that control how Windows requests and allows CPU turbo/boost behavior under the different power policies. They are: Disabled: In this mode, processor boosting is effectively turned off. The CPU will avoid entering turbo or boost frequencies and instead operate closer to its base frequency ceiling. This can significantly reduce power consumption and heat output, but at the cost of reduced burst performance and responsiveness in short workloads. Enabled: This is the standard behavior where boost functionality is allowed under normal conditions. The processor can opportunistically increase frequency when workload demands it, balancing performance gains with power and thermal constraints as managed by the system. Aggressive: Aggressive mode favors performance more heavily, allowing the CPU to enter higher boost states more readily and sustain them longer. This should in theory improve responsiveness under bursty or heavy workloads but increases power draw and thermal output compared to the default enabled behavior. Efficient Enabled: This mode still allows boosting, but with a stronger bias toward energy efficiency. The system attempts to use boost more selectively, avoiding unnecessary frequency spikes when the performance gain is marginal. Efficient Aggressive: This is a hybrid approach where boost is still performance-responsive, but the system continuously weighs efficiency more heavily than in Aggressive mode. It aims to deliver noticeable performance improvements while reducing wasted power in less demanding scenarios. Here's how to enable the Processor performance boost mode: Open Registry Editor: Press Win+R, type regedit, and click OK. Go to: HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\be337238-0d82-4146-a960-4f3749d470c7 (where HKLM stands for HKEY_LOCAL_MACHINE_) Modify the value of Attributes from 1 to 2 (you can find modify option by right-clicking) After that, exit Registry, you should now be able to see the new "Processor performance boost mode" dropdown menu: As you can see there are now five new P-States or CPPC states or power profile available that help define the boost mode processor setting on your PC. Wrapping it up here's a quick run-down of the settings as defined by Microsoft itself. Setting Description Disabled The corresponding P-state-based behaviour is disabled. Collaborative Processor Performance Control (CPPC) behaviour is disabled. Enabled The corresponding P-state-based behaviour is enabled. CPPC behaviour is Efficient Enabled. Aggressive The corresponding P-state-based behaviour is enabled. CPPC behaviour is Aggressive. Efficient Enabled The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Efficient Enabled. Efficient Aggressive The corresponding P-state-based behaviour is Efficient. CPPC behaviour is Aggressive. Aggressive At Guaranteed Windows calculates the desired extra performance above the guaranteed performance level, and asks the processor to deliver that specific performance level. Efficient Aggressive At Guaranteed Windows always asks the processor to deliver the highest possible performance above the guaranteed performance level. In the next part we shall be comparing these settings to explore how much of a benefit or regression they can provide in terms of performance and power efficiency. If you decide to change the values on your system and are experiencing problems like crashes or an overheating PC, make sure to revert the steps back to the original state.
    • I think he means you haven't reviewed previous UFC games. Of course it doesn't matter... Every time you just report on something that involves the President even if just simply what happened you guys usually get accused of being anti-Trump. We live in fun times.
  • Recent Achievements

    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      93
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!